ACDA56-41SEKWA-F01 KINGBRIGHT | Alldatasheet
Document overview
- Manufacturer or author: yalin
- PDF pages: 5
Technical content
Features
z 0.56INCH DIGIT HEIGHT. z LOW CURRENT OPERATION. z EXCELLENT CHARACTER APPEARANCE. z I.C. COMPATIBLE. z MECHANICALLY RUGGED. z GRAY FACE,WHITE SEGMENT. z PACKAGE: 200PCS/ REEL. z MOISTURE SENSITIVITY LEVEL : LEVEL 4. z RoHS COMPLIANT
Description
The Super Bright Orange device is made with InGaAlP (on GaAs substrate) light emitting diode chip. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. 3.The gap between the reflector and PCB shall not exceed 0.25mm.
SPEC NO: DSAG0244 REV NO: V.6 DATE: JUN/14/2007 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI ERP: 1352000338 Selection Guide Note: 1. Luminous intensity/ luminous Flux: +/-15%. Absolute Maximum Ratings at TA=25°C Electrical / Optical Characteristics at TA=25°C Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Part No. Dice Lens Type Iv (ucd) [1] @ 10mA Min. Typ. ACDA56-41SEKWA-F01 Super Bright Orange (InGaAlP) WHITE DIFFUSED 12000 50000 Common Anode, Rt. Hand Decimal. Symbol Parameter Device Typ. Max. Units Test Conditions λpeak Peak Wavelength Super Bright Orange 610 nm IF=20mA λD [1] Dominant Wavelength Super Bright Orange 601 nm IF=20mA Δλ1/2 Spectral Line Half-width Super Bright Orange 29 nm IF=20mA C Capacitance Super Bright Orange 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Orange 2.1 2.5 V IF=20mA IR Reverse Current Super Bright Orange 10 uA VR=5V Parameter Super Bright Orange Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 195 mA Reverse Voltage 5 V Operating / Storage Temperature -40°C To +85°C
SPEC NO: DSAG0244 REV NO: V.6 DATE: JUN/14/2007 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI ERP: 1352000338 Super Bright Orange ACDA56-41SEKWA-F01
SPEC NO: DSAG0244 REV NO: V.6 DATE: JUN/14/2007 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI ERP: 1352000338 ACDA56-41SEKWA-F01 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.15) Reel Dimension Tape Specifications (Units : mm)
SPEC NO: DSAG0244 REV NO: V.6 DATE: JUN/14/2007 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI ERP: 1352000338 PACKING & LABEL SPECIFICATIONS ACDA56-41SEKWA-F01