ACC-PRO-CABLE5

S22 BANNER | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

22 mm Programmable Multicolor RGB Flush Mount Indicator with Independent Momentary or Latching Touch Button Output

• Programmable using Banner Pro Editor software and Pro Converter Cable; Pro Editor compatibility applies to all S22 Pro Touch Button models Resistance to false triggering by water spray, detergents, oils, and other foreign materials
• Rugged, cost-effective, and easy-to-install multicolor indicator with touch button
• Waterproof DIN IP69K construction for washdown environments
• Up to 7 independent colors in one unit
• 22 mm threaded polycarbonate base
• Ergonomically designed to eliminate hand, wrist, and arm stresses associated with repeated switch operation; require no physical force to operate
• Can be actuated with bare hands or gloves
• 10 V dc to 30 V dc operation
• Terminal connection models available for panel wiring applications
• Bimodal inputs and outputs (PNP/NPN), depending on source wiring WARNING: Not To Be Used for Personnel Protection Never use this device as a sensing device for personnel protection. Doing so could lead to serious injury or death. This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Pro Editor Use Banner's Pro Editor software and Pro Converter Cable to create custom configurations by selecting different colors, flash patterns, and animations. For more information visit www.bannerengineering.com/proeditor. Models RGB7 Multicolor Models Family S22 M = Momentary RGB7 = RGB Multicolor M RGB7 Color** A = Normally Open A Blank = 6-wire 2 m (6.5 ft) integral cable QP = 150 mm (5.9 in) cable with 8-pin M12/Euro-style quick disconnect QP Connection* * Models with a quick disconnect require a mating cordset T = Touch T Activation Method Output State R = Normally Closed L = Latching S = Standard S Material F = FDA-grade Output Function ** Green, Red, Yellow, Blue, White, Cyan, Magenta Three inputs activate seven colors. Touch changes output state. S22 Pro Touch Button Original Document 205497 Rev. C

30 October 2018

M = Momentary GRY3 = Programmable Multicolor (3 Color , 5-Pin) M GRY3 Color** A = Normally Open A Blank = 5-wire 2 m (6.5 ft) integral PVC cable Q = Integral 5-pin M12/Euro-style quick disconnect QP = 150 mm (5.9 in) PVC cable with 5-pin T = 5-screw terminal M12/Euro-style quick disconnect Q Connection* * Models with a quick disconnect require a mating cordset T = Touch T Activation Method Output State R = Normally Closed L = Latching S = Standard S Material F = FDA-grade Output Function ** Green, Red, Yellow Two inputs activate three colors. Touch changes output state. One- or Two-Color/Function Models Family S22 G = Green M = Momentary R = Red Y = Yellow B = Blue H = Illuminated Buttons W = White X = Not Used G RM H Color 2/ Sense Function A = Normally Open A Blank = 5-wire 2 m (6.5 ft) integral PVC cable Q = Integral 5-pin M12/Euro-style quick disconnect QP = 150 mm (5.9 in) PVC cable with 5-pin M12/Euro-style quick disconnect T = 5-screw terminal Q Connection* * Models with a quick disconnect require a mating cordset T = Touch T Activation Method Output State R = Normally Closed L = Latching Color 1/ Job S = Standard S Material F = FDA-grade Output Function C = Pick-to-Light E = Pick-to-Light D = Pic k-to-Light Latching output function not available H Logic: Power activates Color 1. Touch changes output state and activates Color 2. Latch and momentary options. C Logic: Input activates Color 1. Touch activates Color 2 and Output. E Logic: Input activates Color 1. Touch activates Output. Touch with inactive input activates Color 2. D Logic: Input activates Color 1. Touch activates Output. One-, Two-, or Three-Color/Function Models Family S22 G = Green M = Momentary R = Red Y = Yellow B = Blue C3 = Specialty Pick-to-Light W = White G RM C3 Color 2/ Mispick Function A = Normally Open A Blank = 5-wire 2 m (6.5 ft) integral PVC cable Q = Integral 5-pin M12/Euro-style quick disconnect QP = 150 mm (5.9 in) PVC cable with 5-pin M12/Euro-style quick disconnect T = 5-screw terminal Q Connection* * Models with a quick disconnect require a mating cordset T = Touch T Activation Method Output State R = Normally Closed Color 1/ Job S = Standard S Material F = FDA-grade Output Function C4 = Specialty Pick-to-Light Y Color 3/ Sense C3 Logic: Input activates Color 1. Touch with active input activates Color 3 and Output. Touch with inactive input activates Color 2 and Output. 500 ms leading edge off-delay. C4 Logic: Input activates Color 1. Touch with active input activates Color 3 and Output. Touch with inactive input activates Color 2 and Output for 5 seconds. 500 ms leading edge off-delay. S22 Pro Touch Button 2 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 205497 Rev. C

7 – N/C N/C Load 10-30V dc Key Pin 1 = White Pin 2 = Brown Pin 3 = Green Pin 4 = Yellow Pin 5 = Gray Pin 6 = Pink Pin 7 = Blue Pin 8 = Red Table 1: RGB Multicolor Color/Function Definition Red Yellow Green Cyan Blue Magenta White Input 1 X X X X Input 2 X X X X Input 3 X X X X GRY3 Multicolor Models NPN 10-30V dc Load PNP 10-30V dc Load Key Pin 1 = Brown Pin 2 = White Pin 3 = Blue Pin 4 = Black Pin 5 = Gray Touch toggles output Table 2: GRY3 Multicolor Color/Function Definition Green Yellow Red Input 1 X X Input 2 X X One- or Two-Color/Function; C, D, and E Logic Models NPN 10-30V dc

4 Load

Pin 1 = Brown Pin 2 = White Pin 3 = Blue Pin 4 = Black Pin 5 = Gray S22 Pro Touch Button P/N 205497 Rev. C www.bannerengineering.com - Tel: +1-763-544-3164 3

One- or Two-Color/Function; H Logic Models NPN 10-30V dc Not Used Load Not Used PNP 10-30V dc Not Used Load Not Used Key Pin 1 = Brown Pin 2 = White Pin 3 = Blue Pin 4 = Black Pin 5 = Gray One-, Two-, or Three-Color/Function; C3 & C4 Logic Models NPN 10-30V dc Pin 1 = Brown Pin 2 = White Pin 3 = Blue Pin 4 = Black Pin 5 = Gray Cabled wiring diagrams are shown. Quick disconnect wiring diagrams are functionally identical. S22 Pro Touch Button 4 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 205497 Rev. C

10 V dc to 30 V dc

80 mA maximum current at 10 V dc (exclusive of load) 70 mA maximum current at 12 V dc (exclusive of load) 45 mA maximum current at 24 V dc (exclusive of load) 40 mA maximum current at 30 V dc (exclusive of load) Supply Protection Circuitry Protected against reverse polarity and transient voltages Output Rating Maximum Load: 150 mA ON-state saturation voltage: <2 V dc at 10 mA; <2.5 V dc at 150 mA OFF-state leakage current: <10 μA at 30 V dc Leakage Current Immunity 400 µA Response Time Power-Up Delay: 250 milliseconds maximum Input Response: 20 milliseconds maximum Output Response: 300 milliseconds maximum Touch Dwell Time If touch dwells for longer than 60 seconds, the output will revert back to the untouched state. Connections 5-pin or 8-pin integral M12/Euro-style quick disconnect, 2 m (6.5 ft) integral PVC cable, or 5-pin or 8-pin 150 mm (5.9 inch) PVC cable with a M12/Euro-style quick disconnect, depending on model Models with a quick disconnect require a mating cordset Mounting M22 by 1.5 threaded base, maximum torque 2.25 N·m (20 inch·lbf) Construction Standard Model Base, Dome, and Nut: Polycarbonate FDA Model Base, Dome, and Nut: FDA-grade copolyester Vibration and Mechanical Shock Meets IEC 60068-2-6 requirements (Vibration: 10 Hz to 55 Hz, 1.0 mm amplitude, 5 minutes sweep, 30 minutes dwell) Meets IEC 60068-2-27 requirements (Shock: 30G 11 ms duration, half sine wave) Operating Conditions 90% at +50 °C maximum relative humidity (non-condensing) Storage Temperature: –40 °C to +70 °C (–40 °F to +158 °F) Environmental Rating Standard Models: IEC IP66, IEC IP67, DIN IP69K Cabled models also meet DIN IP69K if the cable and cable entrance are protected from high-pressure spray Indicator side of terminal models meet DIN IP69K when installed in an enclosure Screw connection points meet IEC IP00 FDA Models: IEC IP66, IEC IP67, and DIN IP69K Certifications Pro Editor Configuration Connection to Pro Editor software enables control of:

• Animation: Steady, Flash, Two Color Flash, Intensity Sweep, Demo
• Color: Green, Red, Yellow, Blue, White, Cyan, Magenta, Amber, Rose, Lime Green, Orange, Sky Blue, Violet, Spring Green
• Intensity: Low, Medium, High
• Speed: Slow, Standard, Fast
• Output State: Normally Open, Normally Closed, Momentary, Latching, On Delay, Off Delay
• Logic Type: Three State Advanced Control (F2 Mode), Seven State Advanced Control (F2 Mode), Four State Full Logic (Custom) Pro Converter Cable required to interface between PC and indicator, see accessories Default Indicator Characteristics Color Dominant Wavelength (nm)or Color Temperature (CCT) Color Coordinates1 Lumen Output (Typical at 25 °C)x y Green 527 0.178 0.700 0.175 Red 625 0.699 0.297 0.075 Yellow 572 0.438 0.500 0.250 Blue 465 0.141 0.056 0.025 White 5700K 0.328 0.337 0.240 Cyan 492 0.192 0.336 0.195 Magenta – 0.354 0.149 0.095 Amber 585 0.520 0.434 0.165 Rose – 0.506 0.213 0.085 Lime Green 557 0.350 0.564 0.210 Sky Blue 485 0.167 0.240 0.165 Orange 597 0.594 0.379 0.130 Violet 424 0.184 0.085 0.045 Spring Green 507 0.167 0.517 0.180 Required Overcurrent Protection WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go to www.bannerengineering.com. Supply Wiring (AWG) Required Overcurrent Protection (Amps) 20 5.0 22 3.0 24 2.0 26 1.0 28 0.8 30 0.5 Dimensions Quick-Disconnect Models 4.0 [0.16] 25.7 [1.01] 40.2 [1.58] ø 20.5 [0.81] M22 x 1.5 Terminal Models 4.0 [0.16] M22 x 1.5 39.1 [1.54] 25.7 [1.01] Cabled Models M22 x 1.5 47.8 [1.88] ø 20.5 [0.81] 25.7 [1.01] 4.0 [0.16] 1 Refer to the CIE 1930 (x,y) Chromaticity Diagram, to show equivalent color with indicated color coordinates. S22 Pro Touch Button P/N 205497 Rev. C www.bannerengineering.com - Tel: +1-763-544-3164 5

All measurements are listed in millimeters [inches], unless noted otherwise. Accessories Pro Editor Hardware MQDC-506-USB Pro Converter Cable

• 1.83 m (6 ft) M12/Euro-style quick disconnect to Device and USB to PC
• Required for connection to Pro Editor CSB-M1251FM1251M 5-pin parallel Y splitter (Male-Male- Female)
• For full Pro Editor preview capability
• Requires external power supply, sold separately PSW-24-1

24 V dc, 1 A power supply

• 2 m (6.5 ft) PVC cable with M12/Euro- style quick disconnect
• Provides external power with splitter cable, sold separately ACC-PRO-CABLE5 Mating accessory for cabled and terminal models
• 150 mm (6 inch) PVC cable with M12/ Euro-style quick disconnect
• Lever wire nuts included (qty 5)
• Required to connect cabled models to Pro Converter Cable, sold separately x5 MQDC-801-5M-806217 8-pin to 5-pin double-ended cordset
• 0.31 m (1 ft) PVC cable with M12/Euro- style quick disconnects
• Required to connect 8-pin Pro Series- enabled devices to Pro Converter Cable (MQDC-506-USB), sold separately Cordsets 5-Pin Threaded M12/Euro-Style Cordsets—Single Ended Model Length Style Dimensions Pinout (Female) MQDC1-501.5 0.50 m (1.5 ft) Straight 44 Typ. ø 14.5 M12 x 1 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray MQDC1-506 1.83 m (6 ft) MQDC1-515 4.57 m (15 ft) MQDC1-530 9.14 m (30 ft) MQDC1-506RA 1.83 m (6 ft) Right-Angle 32 Typ. [1.26"] 30 Typ. [1.18"] ø 14.5 [0.57"] M12 x 1 MQDC1-515RA 4.57 m (15 ft) MQDC1-530RA 9.14 m (30 ft) 5-Pin Threaded M12/Euro-Style Cordsets—Washdown Stainless Steel Model Length Style Dimensions Pinout (Female) MQDC-WDSS-0506 1.83 m (6 ft) Straight 43.5 mm Ø4.8 mm Ø15.5 mm 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray MQDC-WDSS-0515 4.57 m (15 ft) MQDC-WDSS-0530 9.14 m (30 ft) S22 Pro Touch Button 6 www.bannerengineering.com - Tel: +1-763-544-3164 P/N 205497 Rev. C

8-Pin Threaded M12/Euro-Style Cordsets with Open-Shield Model Length Style Dimensions Pinout (Female) MQDC2S-806 1.83 m (6 ft) Straight 44 Typ. ø 14.5 M12 x 1 1 = White 2 = Brown 3 = Green 4 = Yellow 5 = Gray 6 = Pink 7 = Blue 8 = Red MQDC2S-815 4.57 m (15 ft) MQDC2S-830 9.14 m (30 ft) MQDC2S-850 15.2 m (50 ft) MQDC2S-806RA 1.83 m (6 ft) Right-Angle 32 Typ. [1.26"] 30 Typ. [1.18"] ø 14.5 [0.57"] M12 x 1 MQDC2S-815RA 4.57 m (15 ft) MQDC2S-830RA 9.14 m (30 ft) MQDC2S-850RA 15.2 m (50 ft) 8-Pin Threaded M12/Euro-Style Cordsets with Open-Shield—Washdown, Stainless Steel Model Length Style Dimensions Pinout (Female) MQDC-WDSS-0806 1.83 m (6 ft) Straight 44 Typ. ø 14.5 M12 x 1 MQDC-WDSS-0815 4.57 m (15 ft) MQDC-WDSS-0830 9.14 m (30 ft) 1 = White 2 = Brown 3 = Green 4 = Yellow 5 = Gray 6 = Pink 7 = Blue 8 = Red Brackets SMB22A Right-angle bracket with curved slot for versatile orientation

• 12-ga. stainless steel
• Mounting hole for 22 mm sensor A B C Hole center spacing: A to B = 26.0 Hole size: A = ø 4.6, B = 4.6 x 16.9, C = 22.2 SMB22FVK V-clamp, flat bracket and fasteners for mounting to pipe or extensions
• Clamp accommodates 28 mm diameter tubing or 1 in. square extrusions
• 22 mm hole for mounting sensor 46 1 18 A ø22.5 Hole size: A = ø 22.5 SMB22RAVK V-clamp, right-angle bracket and fasteners for mounting to pipe or extensions
• Clamp accommodates 28 mm diameter tubing or 1 in. square extrusions
• 22 mm hole for mounting sensor A Hole size: A = ø 22.5 SMBAMS22P Flat SMBAMS series bracket with 22 mm hole for mounting sensors
• Articulation slots for 90+° rotation
• 12-ga. (2.6 mm) cold-rolled steel 93 A C B Hole center spacing: A = 26.0, A to B = 13.0 Hole size: A = 26.8 x 7.0, B = ø 6.5, C = ø 22.5 S22 Pro Touch Button P/N 205497 Rev. C www.bannerengineering.com - Tel: +1-763-544-3164 7

Right-angle SMBAMS series bracket with 22 mm hole for mounting sensors

• Articulation slots for 90+° rotation
• 12-ga. (2.6 mm) cold-rolled steel A C B Hole center spacing: A = 26.0, A to B = 13.0 Hole size: A = 26.8 x 7.0, B = ø 6.5, C = ø 22.5 TC-K30-CL Touch cover Ø A B Diameter: A = 40.7 Height: B = 31 All measurements are listed in millimeters, unless noted otherwise. Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. For patent information, see www.bannerengineering.com/patents. FCC Part 15 and CAN ICES-3 (B)/NMB-3(B) This device complies with part 15 of the FCC Rules and CAN ICES-3 (B)/NMB-3(B). Operation is subject to the following two conditions: This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules and CAN ICES-3 (B)/NMB-3(B). These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the manufacturer. S22 Pro Touch Button © Banner Engineering Corp. All rights reserved