AC573

SN54AC573_06 TI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 13

Technical content

/C0083/C0078/C0053/C0052/C0065/C0067/C0053/C0055/C0051/C0044 /C0083/C0078/C0055/C0052/C0065/C0067/C0053/C0055/C0051 /C0079/C0067/C0084/C0065/C0076 /C0068/C0262/C0084/C0089/C0080/C0069 /C0084/C0082/C0065/C0078/C0083/C0080/C0065/C0082/C0069/C0078/C0084 /C0076/C0065/C0084/C0067/C0072/C0069/C0083 /C0087/C0073/C0084/C0072 /C0051/C0262/C0083/C0084/C0065/C0084/C0069 /C0079/C0085/C0084/C0080/C0085/C0084/C0083 SCAS542D - OCTOBER 1995 − REVISED OCTOBER 2003 1POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 /C00682-V to 6-V VCC Operation /C0068Inputs Accept Voltages to 6 V /C0068Max tpd of 9 ns at 5 V /C00683-State Outputs Drive Bus Lines Directly description/ordering information These 8-bit latches feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. The devices are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. The eight latches are D-type transparent latches. When the latch-enable (LE) input is high, the Q outputs follow the data (D) inputs. When LE is taken low, the Q outputs are latched at the logic levels set up at the D Inputs. A buffered output-enable (OE ) input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines in a bus-organized system without need for interface or pullup components. OE does not affect the internal operations of the latches. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.

ORDERING INFORMATION

TA PACKAGE † ORDERABLE PART NUMBER TOP-SIDE MARKING PDIP − N Tube SN74AC573N SN74AC573N SOIC − DW Tube SN74AC573DW AC573SOIC − DW Tape and reel SN74AC573DWR AC573 −40°C to 85°C SOP − NS Tape and reel SN74AC573NSR AC573−40 C to 85C SSOP − DB Tape and reel SN74AC573DBR AC573 TSSOP − PW Tube SN74AC573PW AC573TSSOP − PW Tape and reel SN74AC573PWR AC573 CDIP − J Tube SNJ54AC573J SNJ54AC573J −55°C to 125°C CFP − W Tube SNJ54AC573W SNJ54AC573W−55 C to 125C LCCC − FK Tube SNJ54AC573FK SNJ54AC573FK † Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Copyright  2003, Texas Instruments Incorporated/C0085/C0078/C0076/C0069/C0083/C0083 /C0079/C0084/C0072/C0069/C0082/C0087/C0073/C0083/C0069 /C0078/C0079/C0084/C0069/C0068 /C0116/C0104/C0105/C0115 /C0100/C0111/C0099/C0117/C0109/C0101/C0110/C0116 /C0099/C0111/C0110/C0116/C0097/C0105/C0110/C0115 /C0080/C0082/C0079/C0068/C0085/C0067/C0084/C0073/C0079/C0078 /C0068/C0065/C0084/C0065 /C0105/C0110/C0102/C0111/C0114/C0109/C0097/C0116/C0105/C0111/C0110 /C0099/C0117/C0114/C0114/C0101/C0110/C0116 /C0097/C0115 /C0111/C0102 /C0112/C0117/C0098/C0108/C0105/C0099/C0097/C0116/C0105/C0111/C0110 /C0100/C0097/C0116/C0101/C0046 /C0080/C0114/C0111/C0100/C0117/C0099/C0116/C0115 /C0099/C0111/C0110/C0102/C0111/C0114/C0109 /C0116/C0111 /C0115/C0112/C0101/C0099/C0105/C0102/C0105/C0099/C0097/C0116/C0105/C0111/C0110/C0115 /C0112/C0101/C0114 /C0116/C0104/C0101 /C0116/C0101/C0114/C0109/C0115 /C0111/C0102 /C0084/C0101/C0120/C0097/C0115 /C0073/C0110/C0115/C0116/C0114/C0117/C0109/C0101/C0110/C0116/C0115 /C0115/C0116/C0097/C0110/C0100/C0097/C0114/C0100 /C0119/C0097/C0114/C0114/C0097/C0110/C0116/C0121/C0046 /C0080/C0114/C0111/C0100/C0117/C0099/C0116/C0105/C0111/C0110 /C0112/C0114/C0111/C0099/C0101/C0115/C0115/C0105/C0110/C0103 /C0100/C0111/C0101/C0115 /C0110/C0111/C0116 /C0110/C0101/C0099/C0101/C0115/C0115/C0097/C0114/C0105/C0108/C0121 /C0105/C0110/C0099/C0108/C0117/C0100/C0101 /C0116/C0101/C0115/C0116/C0105/C0110/C0103 /C0111/C0102 /C0097/C0108/C0108 /C0112/C0097/C0114/C0097/C0109/C0101/C0116/C0101/C0114/C0115/C0046 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. OE GND V CC LE SN54AC573 ...J O R W PACKAGE SN74AC573 . . . DB, DW, N, NS, OR PW PACKAGE (TOP VIEW) 3 2 1 20 19 91 0 1 1 1 2 1 3 OE 7Q 1Q G ND LE VCC SN54AC573 . . . FK PACKAGE (TOP VIEW)

/C0083/C0078/C0053/C0052/C0065/C0067/C0053/C0055/C0051/C0044 /C0083/C0078/C0055/C0052/C0065/C0067/C0053/C0055/C0051 /C0079/C0067/C0084/C0065/C0076 /C0068/C0262/C0084/C0089/C0080/C0069 /C0084/C0082/C0065/C0078/C0083/C0080/C0065/C0082/C0069/C0078/C0084 /C0076/C0065/C0084/C0067/C0072/C0069/C0083 /C0087/C0073/C0084/C0072 /C0051/C0262/C0083/C0084/C0065/C0084/C0069 /C0079/C0085/C0084/C0080/C0085/C0084/C0083 SCAS542D - OCTOBER 1995 − REVISED OCTOBER 2003

2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

description/ordering information (continued) To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. FUNCTION TABLE (each latch) INPUTS OUTPUT OE LE D OUTPUT Q L H H H L HL L L LX Q 0 H X X Z logic diagram (positive logic) OE LE To Seven Other Channels absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2. The package thermal impedance is calculated in accordance with JESD 51-7.

/C0083/C0078/C0053/C0052/C0065/C0067/C0053/C0055/C0051/C0044 /C0083/C0078/C0055/C0052/C0065/C0067/C0053/C0055/C0051 /C0079/C0067/C0084/C0065/C0076 /C0068/C0262/C0084/C0089/C0080/C0069 /C0084/C0082/C0065/C0078/C0083/C0080/C0065/C0082/C0069/C0078/C0084 /C0076/C0065/C0084/C0067/C0072/C0069/C0083 /C0087/C0073/C0084/C0072 /C0051/C0262/C0083/C0084/C0065/C0084/C0069 /C0079/C0085/C0084/C0080/C0085/C0084/C0083 SCAS542D - OCTOBER 1995 − REVISED OCTOBER 2003 3POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 recommended operating conditions (see Note 3) SN54AC573 SN74AC573 UNITMIN MAX MIN MAX UNIT VCC Supply voltage 2 6 2 6 V VCC = 3 V 2.1 2.1 VIH High-level input voltage VCC = 4.5 V 3.15 3.15 VVIH High-level input voltage VCC = 5.5 V 3.85 3.85 V VCC = 3 V 0.9 0.9 VIL Low-level input voltage VCC = 4.5 V 1.35 1.35 VVIL Low-level input voltage VCC = 5.5 V 1.65 1.65 V VI Input voltage 0 VCC 0 VCC V VO Output voltage 0 VCC 0 VCC V VCC = 3 V −12 −12 IOH High-level output current VCC = 4.5 V −24 −24 mAIOH High-level output current VCC = 5.5 V −24 −24 mA VCC = 3 V 12 12 IOL Low-level output current VCC = 4.5 V 24 24 mAIOL Low-level output current VCC = 5.5 V 24 24 mA ∆t/∆v Input transition rise or fall rate 8 8 ns/V TA Operating free-air temperature −55 125 −40 85 °C NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VCC TA = 25°C SN54AC573 SN74AC573 UNITPARAMETER TEST CONDITIONS VCC MIN TYP MAX MIN MAX MIN MAX UNIT 3 V 2.9 2.9 2.9 IOH = −50 µA 4.5 V 4.4 4.4 4.4IOH = −50 µA 5.5 V 5.4 5.4 5.4 VOH IOH = −12 mA 3 V 2.58 2.48 2.48 VVOH IOH = −24 mA 4.5 V 3.94 3.8 3.8 V IOH = −24 mA 5.5 V 4.94 4.8 4.8 IOH = −75 mA† 5.5 V 3.85 3.85 3 V 0.1 0.1 0.1 IOL = 50 µA 4.5 V 0.1 0.1 0.1IOL = 50 µA 5.5 V 0.1 0.1 0.1 VOL IOL = 12 mA 3 V 0.36 0.44 0.44 VVOL IOL = 24 mA 4.5 V 0.36 0.44 0.44 V IOL = 24 mA 5.5 V 0.36 0.44 0.44 IOL = 75 mA 5.5 V 1.65 1.65 II VI = VCC or GND 5.5 V ±0.1 ±1 ±1 µA IOZ VO = VCC or GND 5.5 V ±0.25 ±5 ±2.5 µA ICC VI = VCC or GND, IO = 0 5.5 V 4 80 40 µA C i VI = VCC or GND 5 V 5 pF † Not more than one output should be tested at a time, and the duration of the test should not exceed 10 ms. /C0080/C0082/C0079/C0068/C0085/C0067/C0084 /C0080/C0082/C0069/C0086/C0073/C0069/C0087 /C0105/C0110/C0102/C0111/C0114/C0109/C0097/C0116/C0105/C0111/C0110 /C0099/C0111/C0110/C0099/C0101/C0114/C0110/C0115 /C0112/C0114/C0111/C0100/C0117/C0099/C0116/C0115 /C0105/C0110 /C0116/C0104/C0101 /C0102/C0111/C0114/C0109/C0097/C0116/C0105/C0118/C0101 /C0111/C0114 /C0100/C0101/C0115/C0105/C0103/C0110 /C0112/C0104/C0097/C0115/C0101 /C0111/C0102 /C0100/C0101/C0118/C0101/C0108/C0111/C0112/C0109/C0101/C0110/C0116/C0046 /C0067/C0104/C0097/C0114/C0097/C0099/C0116/C0101/C0114/C0105/C0115/C0116/C0105/C0099 /C0100/C0097/C0116/C0097 /C0097/C0110/C0100 /C0111/C0116/C0104/C0101/C0114 /C0115/C0112/C0101/C0099/C0105/C0102/C0105/C0099/C0097/C0116/C0105/C0111/C0110/C0115 /C0097/C0114/C0101 /C0100/C0101/C0115/C0105/C0103/C0110 /C0103/C0111/C0097/C0108/C0115/C0046 /C0084/C0101/C0120/C0097/C0115 /C0073/C0110/C0115/C0116/C0114/C0117/C0109/C0101/C0110/C0116/C0115 /C0114/C0101/C0115/C0101/C0114/C0118/C0101/C0115 /C0116/C0104/C0101 /C0114/C0105/C0103/C0104/C0116 /C0116/C0111 /C0099/C0104/C0097/C0110/C0103/C0101 /C0111/C0114 /C0100/C0105/C0115/C0099/C0111/C0110/C0116/C0105/C0110/C0117/C0101 /C0116/C0104/C0101/C0115/C0101 /C0112/C0114/C0111/C0100/C0117/C0099/C0116/C0115 /C0119/C0105/C0116/C0104/C0111/C0117/C0116 /C0110/C0111/C0116/C0105/C0099/C0101/C0046

/C0083/C0078/C0053/C0052/C0065/C0067/C0053/C0055/C0051/C0044 /C0083/C0078/C0055/C0052/C0065/C0067/C0053/C0055/C0051 /C0079/C0067/C0084/C0065/C0076 /C0068/C0262/C0084/C0089/C0080/C0069 /C0084/C0082/C0065/C0078/C0083/C0080/C0065/C0082/C0069/C0078/C0084 /C0076/C0065/C0084/C0067/C0072/C0069/C0083 /C0087/C0073/C0084/C0072 /C0051/C0262/C0083/C0084/C0065/C0084/C0069 /C0079/C0085/C0084/C0080/C0085/C0084/C0083 SCAS542D - OCTOBER 1995 − REVISED OCTOBER 2003

4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

timing requirements over recommended operating free-air temperature range, VCC = 3.3 V ± 0.3 V (unless otherwise noted) (see Figure 1) TA = 25°C SN54AC573 SN74AC573 UNITMIN MAX MIN MAX MIN MAX UNIT tw Pulse duration, LE high 6 8 7 ns tsu Setup time, data before LE↓ 3.5 5 4 ns th Hold time, data after LE↓ 2 3 2 ns timing requirements over recommended operating free-air temperature range, VCC = 5 V ± 0.5 V (unless otherwise noted) (see Figure 1) TA = 25°C SN54AC573 SN74AC573 UNITMIN MAX MIN MAX MIN MAX UNIT tw Pulse duration, LE high 4 6 5 ns tsu Setup time, data before LE↓ 3 4.5 3.5 ns th Hold time, data after LE↓ 2 3 2 ns switching characteristics over recommended operating free-air temperature range, VCC = 3 V ± 0.3 V (unless otherwise noted) (see Figure 1) PARAMETER FROM TO TA = 25°C SN54AC573 SN74AC573 UNITPARAMETER FROM (INPUT) TO (OUTPUT) MIN MAX MIN MAX MIN MAX UNIT tPLH D Q 2.5 13 1.5 16.5 2 15 nstPHL D Q 2.5 12 1.5 15.5 2 14 ns tPLH LE Q 2.5 13 1.5 16.5 2 15 nstPHL LE Q 2.5 12 1.5 15.5 2 14 ns tPZH OE Q 2.5 11 1.5 13.5 2 12 nstPZL OE Q 2.5 11 1.5 14 2 12.5 ns tPHZ OE Q 2.5 12.5 1.5 15 2 13.5 ns tPLZ OE Q 2.5 9.5 1.5 12 2 10.5 ns switching characteristics over recommended operating free-air temperature range, VCC = 5 V ± 0.5 V (unless otherwise noted) (see Figure 1) PARAMETER FROM TO TA = 25°C SN54AC573 SN74AC573 UNITPARAMETER FROM (INPUT) TO (OUTPUT) MIN MAX MIN MAX MIN MAX UNIT tPLH D Q 2.5 10 1.5 13 2 11.5 nstPHL D Q 2.5 9.5 1.5 12.5 2 11 ns tPLH LE Q 2.5 9.5 1.5 12.5 2 11 nstPHL LE Q 2.5 8.5 1.5 11.5 2 10 ns tPZH OE Q 2.5 9 1.5 11.5 2 10 nstPZL OE Q 2.5 8.5 1.5 11 2 9.5 ns tPHZ OE Q 2.5 11 1.5 13.5 2 12 ns tPLZ OE Q 2.5 8 1.5 10.5 2 9 ns operating characteristics, VCC = 5 V, TA = 25°C PARAMETER TEST CONDITIONS TYP UNIT C pd Power dissipation capacitance C L = 50 pF, f = 1 MHz 25 pF /C0080/C0082/C0079/C0068/C0085/C0067/C0084 /C0080/C0082/C0069/C0086/C0073/C0069/C0087 /C0105/C0110/C0102/C0111/C0114/C0109/C0097/C0116/C0105/C0111/C0110 /C0099/C0111/C0110/C0099/C0101/C0114/C0110/C0115 /C0112/C0114/C0111/C0100/C0117/C0099/C0116/C0115 /C0105/C0110 /C0116/C0104/C0101 /C0102/C0111/C0114/C0109/C0097/C0116/C0105/C0118/C0101 /C0111/C0114 /C0100/C0101/C0115/C0105/C0103/C0110 /C0112/C0104/C0097/C0115/C0101 /C0111/C0102 /C0100/C0101/C0118/C0101/C0108/C0111/C0112/C0109/C0101/C0110/C0116/C0046 /C0067/C0104/C0097/C0114/C0097/C0099/C0116/C0101/C0114/C0105/C0115/C0116/C0105/C0099 /C0100/C0097/C0116/C0097 /C0097/C0110/C0100 /C0111/C0116/C0104/C0101/C0114 /C0115/C0112/C0101/C0099/C0105/C0102/C0105/C0099/C0097/C0116/C0105/C0111/C0110/C0115 /C0097/C0114/C0101 /C0100/C0101/C0115/C0105/C0103/C0110 /C0103/C0111/C0097/C0108/C0115/C0046 /C0084/C0101/C0120/C0097/C0115 /C0073/C0110/C0115/C0116/C0114/C0117/C0109/C0101/C0110/C0116/C0115 /C0114/C0101/C0115/C0101/C0114/C0118/C0101/C0115 /C0116/C0104/C0101 /C0114/C0105/C0103/C0104/C0116 /C0116/C0111 /C0099/C0104/C0097/C0110/C0103/C0101 /C0111/C0114 /C0100/C0105/C0115/C0099/C0111/C0110/C0116/C0105/C0110/C0117/C0101 /C0116/C0104/C0101/C0115/C0101 /C0112/C0114/C0111/C0100/C0117/C0099/C0116/C0115 /C0119/C0105/C0116/C0104/C0111/C0117/C0116 /C0110/C0111/C0116/C0105/C0099/C0101/C0046

NOTES: A. C L includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr ≤ 2.5 ns, tf ≤ 2.5 ns. D. The outputs are measured one at a time with one input transition per measurement. Figure 1. Load Circuit and Voltage Waveforms

Orderable Device Status(1) Package Type Package Drawing Pins Package Qty Eco Plan(2) Lead/Ball FinishMSL Peak Temp (3) SN74AC573DBLE OBSOLETE SSOP DB 20 TBD Call TI Call TI SN74AC573DBR ACTIVE SSOP DB 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74AC573DBRE4 ACTIVE SSOP DB 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74AC573DW ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74AC573DWE4 ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74AC573DWG4 ACTIVE SOIC DW 20 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74AC573DWR ACTIVE SOIC DW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74AC573DWRE4 ACTIVE SOIC DW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74AC573DWRG4 ACTIVE SOIC DW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74AC573N ACTIVE PDIP N 20 20 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SN74AC573NE4 ACTIVE PDIP N 20 20 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SN74AC573NSR ACTIVE SO NS 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74AC573NSRE4 ACTIVE SO NS 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74AC573PW ACTIVE TSSOP PW 20 70 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74AC573PWE4 ACTIVE TSSOP PW 20 70 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74AC573PWLE OBSOLETE TSSOP PW 20 TBD Call TI Call TI SN74AC573PWR ACTIVE TSSOP PW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74AC573PWRE4 ACTIVE TSSOP PW 20 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM (1)The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2)Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontentfor the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS):TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt):This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. PACKAGE OPTION ADDENDUM www.ti.com 18-Jul-2006 Addendum-Page 1

Green (RoHS & no Sb/Br):TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. PACKAGE OPTION ADDENDUM www.ti.com 18-Jul-2006 Addendum-Page 2

MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 4040065 /E 12/01

28 PINS SHOWN

8,20 7,40 0,55 0,95 0,25 12,90 12,30 10,50 8,50 Seating Plane 9,907,90 10,50 9,90 0,38 5,60 5,00 0,22 A 2016 6,506,50 0,05 MIN 5,905,90 DIM A MAX A MIN PINS ** 2,00 MAX 6,90 7,50 0,65 M0,15 0°–/C02578° 0,10 0,09 0,25 NOTES: A. All linear dimensions are in millimeters. B. This drawing is subject to change without notice. C. Body dimensions do not include mold flash or protrusion not to exceed 0,15. D. Falls within JEDEC MO-150

MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 PW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE

14 PINS SHOWN

0,65 M0,10 0,10 0,25 0,50 0,75 0,15 NOM Gage Plane 9,80 9,60 7,90 7,70 2016 6,60 6,40 4040064/F 01/97 0,30 6,60 6,20 0,19 4,30 4,50 0,15 A 1,20 MAX 5,10 4,90 3,10 2,90 A MAX A MIN DIM PINS ** 0,05 4,90 5,10 Seating Plane 0°–8° NOTES: A. All linear dimensions are in millimeters. B. This drawing is subject to change without notice. C. Body dimensions do not include mold flash or protrusion not to exceed 0,15. D. Falls within JEDEC MO-153

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Low Power Wireless www.ti.com/lpw Telephony www.ti.com/telephony Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright  2006, Texas Instruments Incorporated