DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

Applications

Performance Specificationns AAWG Series Athermal Arrayed-Waveguide Grating Multiplexer/Demultiplexer AAWG Parameters Min. Typical Max. Unit Channel Spacing 100 GHz Number of Channels 32, 40 or 44 Channel Passband ± 12.5 GHz Insertion Loss [2] 4.5 5.5 dB Uniformity ≤ 40CH 0.9 1.2 dB > 44CH 1.2 1.5 dB Ripple 0.35 0.5 dB 1dB Bandwidth [3] 50 GHz 3dB Bandwidth [3] 75 GHz Polarization Dependent Loss 0.5 dB Adjacent Channel Crosstalk 25 dB Non-adjacent Channel Crosstalk 35 dB Total Crosstalk 22 dB Return Loss 45 dB Directivity 50 dB Chromatic Dispersion [4] - 20 + 20 ps/nm PMD [4] 0.5 ps Maximum Power Handling 300 mW Fiber Type G. 652D Fiber Jacket Without Fan-out C : 900µm loose tube B : 12-Core ribbon fiber With Fan-out C : 900µm loose tube B : 12-Core fibbon fiber A : 900µm loose tube Fiber Length Refer ordering information Connector Type Refer ordering information Operating Temperature - 5 to +70 °C Storage Temperature -40 to +85 °C Notes: [1] All the parameters are excluding connectors. IL of con- nectors is 0.2dB/pair for PC/UPC/SPC types and 0.4dB per pair for APC types. [2] The maximum IL is under all states of polarization and within the full operating temperature and wavelength ranges specified. [3] Measured from minimum loss to 1dB and 3dB down respectively. [4] Over ITU band Athermal Arrayed-Waveguide Grating (AAWG) have equivalent perfor - mance to thermal AWGs but no any electrical power needed for operation. AAWG is more simple than thermal AWG. Oplink’s planar lightwave circuits are well suited for demanding telecom ap- plications in long-haul and metro transmission systems. The AAWG provide extremely excellent optical performance, high reliability, ease of fiber han - dling and power saving solution in a compact package.  Pure Passive  MSA package  Low insertion loss /PDL  Extremely low crosstalk  Telcordia GR-1209/1221 qualified  ROADM  FOADM  xGPON  WDM-PON

Athermal Arrayed-Waveguide Grating Multiplexer/Demultiplexer Oplink Communications, Inc Channel Spectrum Table Mechanical Drawing / Package Dimensions (dimension in mm) 120.0 110.0 60.0 70.0 (17.5)(30.0) 5.0 5.0 4-Ø3.2 through 10.5 15.0(MAX) 4.5 ANGLES: TOL'S: .XX: ±0.10 ±0.5° .X: ±0.2 Typical Flat-Top 40-Channel Spectrum *The mechanical tolerance should be ±0.2mm on all package dimensions unless otherwise specified.

46335 Landing Pkwy Fremont, CA 94538 T el: (510) 933-7200 Fax: (510) 933-7300 Email: Sales@Oplink.com • www.oplink.com AAWG Series Athermal Arrayed-Waveguide Grating Multiplexer/Demultiplexer Product Lines:  Mux/Demux  Switching/Routing  Coupling/Splitting  Monitoring/Conditioning  Amplification  Interconnect  Transmission  HFC/RoF Subsystem S0312 - R03. (web) 20121218

Ordering Information

Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM design team or account manager for your requirements and ordering information (510) 933-7200. Number of Channels 32ch = 32 40ch = 40 44ch = 44 **** (B)Fiber Length* (A)Fiber Length* Largest ITU Channel Number AAWG T ype (C)Fiber Length* 0.5 meter = H 1.0 meter = 1 1.5 meter = 5 0 meter = 0 (without fan-out) 0.5 meter = H 1.0 meter = 1 1.5 meter = 5 Flat-Top = F 0.5 meter = H 1.0 meter = 1 1.5 meter = 5 Connector T ype None = 1 FC/PC = 2 FC/SPC = 3 FC/APC = 4 SC/PC = 5 SC/SPC = 6 SC/APC = 7 ST = 8 LC/UPC = 9 MU = A LC/APC = B MTP(female) = C* MTP(male) = D*** * The tolerance of fiber length is +/-0.1m. Only MTP Connectors are available if the length of fiber A is 0 (without fan-out). Please choose 1 or C or D for the last digit of Oplink Part Number. * When MTP option was available, it must be LC/UPC option for fiber C. ****For other number of channels, please contact Oplink’s sales department for further information. length on fiber B, 1.0+/-0.1m fiber length on fiber A , all with LC/UPC connectors. AAWG1 Definition of Fiber Length A, B and C (with fan-out)Definition of Fiber Length B and C (without fan-out)