IF610-126 GAMEWELL-FCI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
One to four Signaling Line Circuits (SLC), up to 504 points. Polarity-insensitive SLC circuit wiring (XP95 protocol). SmartStart™ self-programming logic. Programmable by PC or front panel. Password protected. Approved for Suppressant Releasing and Supervisory Service. Fully digital SLC protocol. SmartLink™ networkable. 1000-event history log. Automatic drift compensation. Coded signaling capability. Adjustable sensor sensitivity and temperature settings. Day/night sensitivity setting. Supervisory service. Style 6 (Class A) or Style 4 (Class B) SLC. Two Style Y (Class B), or two Style Z (Class A) notification appliance circuits (NACs). Semi-flush mounting (between 16" studs). 160-character display. Optional integrated voice evacuation. Optional UDACT. Agent Releasing service. IF610 GF-2001ph.jpg SmartStart™ and SmartLink™ are trademarks of Honeywell International Inc.
12 Clintonville Road, Northford, CT 06472-1610 USA Tel: (203) 484-7161 Fax: (203) 484-7118
CS-2001 Rev. A page 2 of 3 www.gamewell-fci.com Analog Addressable Signaling Line Circuits The IF610 analog interface module provides one to four Signaling Line Circuits (SLC), circuits that can monitor and control up to 126 analog/addressable devices on each power-limited circuit, for a total of 504 analog points in a four-SLC system. Circuit wiring is not polarity sensitive. Each SLC has a dedicated microprocessor that simulta- neously communicates with connected field devices and the main CPU. The IF610 uses XP95 fully digital communications protocol for superior speed and accuracy of event reporting. This protocol provides alarm verification per detector, detector adjustability and compensation, adjustable analog heat detector range (131°F to 194°F, 55°C to 90°C), circuit isola- tion, and priority interrupts. Priority interrupts allow contact- type devices such as manual fire alarm stations to interrupt the polling cycle and transmit their addresses at any time. With this fully digital protocol, the IF610 will operate on most types of field wiring, greatly expanding its use in retro- fit applications. Consult Gamewell-FCI Technical Support for specific wiring requirements. IF610 Power Supply The IF610 power supply is a fully regulated 6 amp supply that furnishes system operating and signaling power. It is equipped with a battery charger which maintains the sec- ondary power source. The power supply is monitored by the main CPU, ensuring that adequate power is available. The power supply design allows for high efficiency while providing precise power output. The battery charger main- tains batteries up to 26 AH. The supply powers two (2) on- board NACs (Class A or B). I/O Devices Addressable control output devices are the interface between analog circuits and building functions. The outputs are controlled by Control By Event (CBE) software within the IF610, and can be programmed to respond to any event. The control devices can also be used as supervised remote signaling circuits. The IF610’s RS-232 output expands system monitoring and control capabilities. Remote Display and Control System designers and engineers can add serial annuncia- tors to display system activity and control. Serial annuncia- tor drivers are available in 16-point increments and are an ideal interface to graphic annunciators. Switches can be used for Acknowledge, Reset, Signal Silence, Drill, etc., to customize the remote status control network. An alphanu- meric display can also be used for remote status and con- trol. The alphanumeric display will communicate over the serial communications network. The IF610 can communicate locally or remotely with a printer to document system activity. See the RAN/SAN data sheets (CS-2025 and CS-2027) for the complete annunicator details.
Applications
The IF610 Analog Addressable Control Panel is designed for new or retrofit small- to mid-sized projects that require state-of-the-art life-safety systems. The embedded CPU offers users unrivaled reliability. With compatible analog sensors and addressable input and control interface devices, and its remote status and control capabilities, the IF610 provides system engineers with all the tools necessary to design effective system solutions. The IF610 can also control bulk fire-suppressant materials releasing. The IF610 is capable of releasing the following NFPA types of suppressant: 13 Sprinkler, 15 Water Spray,
11 Low-Expansion Foam, 16 Water Foam, 17 Dry Chemi-
cal, and 2001 Clean Agent. Architectural/Engineering Specifications The control panel furnished and installed shall be capable of supporting 504 addressable devices and four (4) analog SLCs. The panel shall use a fully digital Signaling Line Cir- cuit (SLC) protocol. The panel shall contain two (2) Notifi- cation Appliance Circuits (NACs) that support multiple synchronization protocols. The panel shall use a 160-char- acter Liquid Crystal Display (LCD) and a 1,000-event his- tory log. The panel shall be a Gamewell-FCI IF610.
www.gamewell-fci.com CS-2001 Rev. A page 3 of 3 Specifications Common Control Standby Current: 0.125A. Alarm Current: 0.171A plus NAC power, plus 0.002A for master box, or plus 0.022A for reverse-polarity Input Power: 120 VAC, 2.0A Auxiliary Output: S+/S–, A+/A–: 24 VDC, 2.0A combined maximum Common Relays: 1.0A @ 30 VDC, or 0.5A @ 250 VAC Signaling Circuits: 24 VDC nominal @ 2.0A per circuit Analog SLCs IF610-126 points: Standby current 0.045A, alarm current 0.045A IF610-252 points: Standby current 0.055A, alarm current 0.055A IF610-504 points: Standby current 0.075A, alarm current 0.075A Panel Dimensions: Standard Cabinet: 20.0” H x 14.0” W x 4.5” (50.8 H x 35.56 W x 11.43 D cm) XL Cabinet: 30.0” H x 22.0 W x 5.5” D (76.2 H x 55.88 W x 13.97 D cm) Battery Storage Dimensions: 8.0" H x 14.25" W x 6.0" D (20.3 H x 36. W x 15.2 D cm) Standard Cabinet: 6.0” H x 9.0” W x 4.5” D (15.5 H x 22.86 W x 11.43 D cm) XL Cabinet: 14” H x 22.0” W x 5.5” D (35.56 H x 55.88 W x 13.97 D cm) Relative Humidity: 93% non-condensing Temperature Rating: 32° – 120°F (0° – 49°C)
Ordering Information
IF610-126 IdentiFlex 610 base analog/addressable system consisting of the following: IF610 common control that includes: - Main CPU - IF610 front display with LCD alphanumeric display - Bus Driver Module - Common system relays - Ribbon cables 6 amp main power supply One (1) analog circuit module (126 analog addressable points) Standard cabinet assembly 20.0” H x 14.0” W x 4.5” D (50.8 H x 35.56 W x 11.43 D cm) Ordering Information (Continued) Model Description IF610-126XL 126 point/one SLC IF610 in extra-large housing allowing space for battery storage. (Refer to the IF610-126) 30.0” H x 22.0” W x 5.5” D (76.2 H x 55.88 W x 13.97 D cm) AAM610-252 Upgrades the IF610-126 to an IF610-252 System. Replaces the single analog circuit card with a two-circuit card to provide a total of 252 analog addressable points. IF610-252 IF610 analog addressable system consist- ing of the following: IF610 common control that includes: - Main CPU - IF610 front display with LCD alphanumeric display - Bus Driver Module - Common system relays - Ribbon cables 6 amp main power supply Two (2) analog circuits module (252 analog addressable points) Standard cabinet assembly 30.0” H x 22.0” W x 5.5” D (76.2 H x 55.88 W x 13.97 D cm) AAM610-504 Upgrades the IF610-252 or IF610-126 to an IF610-504 system. Replaces the single- and/or two circuit analog card with a four- circuit card to provide a total of 504 analog addressable points. IF610-504 IF610 analog addressable system consist- ing of the following: IF610 common control that includes: - Main CPU - IF610 front display with LCD alpha numeric display - Bus Driver Module - Common system relays - Ribbon cables 6 amp main power supply Four (4) analog circuits module (504 analog addressable points) Standard cabinet assembly 20.0” H x 14.0” W x 4.5” D (50.8 H x 35.56 W x 11.43 D cm) IF610-504XL 504 point/four SLC IF610 in extra-large housing, allowing space for battery storage (Refer to the above IF610-504) 30.0” H x 22.0” W x 5.5” D (76.2 H x 55.88 W x 13.97 D cm)