AAF-03 MINMAX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

E-mail:sales@minmax.com.tw Tel:886 -6-2923150 2015/05/22 REV:5 Page 1 of 3

FEATURES

►Fully Encapsulated Plastic Case for PCB Mounting ►Universal Input 85~264VAC, 47~440Hz ►Protection Class II as per IEC/EN 60536 ►Operating Temp. Range -25°C to +70°C ►Overload/Voltage and Short Circuit Protection ►EMI Emission meets EN55011/22 Class B & FCC Level B ►EMC Immunity meets EN61000-4-2,3,4,5,6,8,11 ►Eco Design, Low No Load Power Consumption < 150mW ►UL/cUL/IEC/EN 60950-1, TUV/IEC/EN60335-1 Safety Approval ►CE Marking with EMC and LVD PRODUCT OVERVIEW The new AAF-03 Series from MINMAX is a range of ultra-small,fully encapsulated 3 Watt AC/DC power supply modules.They are designed for easy PCB mounting with solder pins.The modules feature EMI-filter to meet EN 55011/55022,class B and EN 55014.EMC immunity complies with EN 61000-6-1.The low stand-by power consumption complies with European ErP Directive 2009/125/EC. Universal input voltage range of 85-264VAC and an International safety approval package qualifies the power modules for worldwide markets. The AAF-03 series provide a cost effective solution for space critical applications in consumer appliances and instrumentation and communication equipment. Model Selection Guide Model Number Output Voltage Output Current Input Current Max. capacitive Load Efficiency (typ.) Max. Peak(1) @Max. Load @Max. Load VDC mA mA mA(typ.) μF % AAF-03S03 3.3 900 1170 62 1200 70 AAF-03S05 5 600 780 61 820 72 AAF-03S09 9 333 430 57 470 77 AAF-03S12 12 250 320 56 330 78 AAF-03S15 15 200 260 56 270 78 AAF-03S24 24 125 160 56 180 78 Input Specifications Parameter Model Min. Typ. Max. Unit Input Voltage Range All Models 85 --- 264 VAC Input Frequency Range 47 --- 63 Hz Input Voltage Range 120 --- 370 VDC No-Load Power Consumption --- --- 150 mW Inrush Current (Cold Start at 25℃) 115VAC --- --- 15 A

E-mail:sales@minmax.com.tw Tel:886-6-2923150 2015/05/22 REV:5 Page 2 of 3 Output Specifications Parameter Conditions Min. Typ. Max. Unit Output Voltage Accuracy --- --- ±2.0 %Vom. Line Regulation Vin=Min. to Max. @Full Load --- --- ±1.0 % Load Regulation Io=0% to 100% --- --- ±1.0 % Ripple & Noise 0-20 MHz Bandwidth --- --- 70 mV P-P Minimum Load No minimum Load Requirement Over Voltage Protection Zener Diode Clamp --- 125 190 % of Vo Temperature Coefficient --- --- ±0.05 %/℃ Overshoot --- --- 5 %Vout Current Limitation Foldback, auto-recovery 135 150 --- %Inom. (long term overload condition may cause damage) Short Circuit Protection Hiccup mode, indefinite (Automatic Recovery) General Specifications Parameter Conditions Min. Typ. Max. Unit I/O Isolation Voltage 60 Seconds 3000 --- --- VAC I/O Isolation Resistance 500 VDC 100 --- --- MΩ Switching Frequency --- 65 --- KHz Hold-up Time 115VAC, Full Load --- 8 --- ms MTBF (calculated) MIL-HDBK-217F@25℃, Ground Benign 1,200,000 Hours Protection Class II According IEC/EN 60536 Safety Approvals UL/cUL 60950-1 recognition(UL certificate) IEC/EN 60950-1(CB-report) IEC/EN 60335-1 recognition(TUV certificata,CB-report) EMC Specifications Parameter Standards & Level Performance EMI Conduction EN55011, EN55014-1, EN55022, FCC part 15 Class B Radiation EMS EN55014-2 ,EN55024 ESD EN61000-4-2 Air ± 8kV, Contact ± 4kV A Radiated immunity EN61000-4-3 10V/m A Fast transient EN61000-4-4 ±2kV A Surge EN61000-4-5 ±1kV A Conducted immunity EN61000-4-6 10Vrms A PFMF EN61000-4-8 30A/m A Dips EN61000-4-11 30% 10ms A Interruptions EN61000-4-11 >95% 5000ms B Environmental Specifications Parameter Conditions Min. Max. Temperature Range (operational) Ambient -25℃ +70℃ Power Derating +60℃ to +70℃ 0.15 W/℃ Storage Temperature Range -40℃ +85℃ Humidity (non condensing) --- 95 % rel. H Cooling Natural Convection Lead Temperature (1.5mm from case for 10Sec.) --- 260℃ Notes 1 Peak load lasting <30s with a maximum duty cycle of 10%, average output power not to exceed maximum power. 2 All specifications typical at Ta=+25℃, resistive load, 115VAC, 60Hz input voltage and after warm-up time rated output current unless otherwise noted. 3 We recommend to protect the converter by a slow blow fuse in the input supply line. 4 Other input and output voltage may be available, please contact factory. 5 That “natural convection” is about 20LFM but is not equal to still air (0 LFM). 6 Specifications are subject to change without notice.

Minmax Technology Co., Ltd. 18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan Tel: 886-6-2923150 Fax: 886 -6-2923149 E -mail: sales@minmax.com.tw 2015/05/22 REV:5 Page 3 of 3 Package Specifications Mechanical Dimensions Pin Connections Pin Function

1 AC (N)

2 AC (L)

NC: No Connection ►All dimensions in mm (inches) ►Tolerance: ±0.5 (±0.01) ►Pin diameter  0.6 ±0.1 (0.02±0.004) Physical Characteristics Case Material : Plastic resin (flammability to UL 94V-0 rated) Pin Material : Copper Alloy with Gold Plate Over Nickel Subplate Weight : 17.4g 5.08 [0.20] 0.60 [ 0.02] [0.40] 2.54 [0.10] 25.4 [1.00] 25.4 [1.00] 16 .3 [0.64] 5.08 [0.20] 20.32 [0.80] 2.54 [0.10] [0.40] 25.4 [1.00] 10.1610.16