AAA3528RGBS-K11-C8CC KINGBRIGHT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Features

z Suitable for all SMD assembly and solder process. z Available on tape and reel. z Package: 2000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Descriptions z The Hyper Red device is based on light emitting diode chip made from AlGaInP. z The Green source color devices are made with InGaN Light Emitting Diode. z The Blue source color devices are made with InGaN Light Emitting Diode. z Electrostatic discharge and power surge could damage the LEDs. z It is recommended to use a wrist band or anti- electrostatic glove when handling the LEDs. z All devices, equipments and machineries must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications.

SPEC NO: DSAN6015 REV NO: V.3B DATE: JUL/25/2017 PAGE: 2 OF 8 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1201008811 Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly Orangeuces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might lead to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. 3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry. 4.1. The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. 4.2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup. 4.3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production. 5. As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plating of leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances.

SPEC NO: DSAN6015 REV NO: V.3B DATE: JUL/25/2017 PAGE: 3 OF 8 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1201008811 Selection Guide Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Absolute Maximum Ratings at TA=25°C Electrical / Optical Characteristics at TA=25°C Notes: 1.Wavelength: +/-1nm. 2.Forward Voltage: +/-0.1V. 3.Wavelength value is traceable to CIE127-2007 standards. 4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Part No. Emitting Color (Material) Lens Type Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Max. 2 θ1/2 AAA3528RGBS/K11/C8CC Hyper Red (AlGaInP) Water Clear 400 1000 Green (InGaN) 1000 2300 Blue (InGaN) 200 500 120° Symbol Parameter Emitting Color Typ. Max. Units Test Conditions λpeak Peak Wavelength Hyper Red Green Blue 640 520 465 nm I F=20mA λD [1] Dominant Wavelength Hyper Red Green Blue 635 535 473 nm I F=20mA Δλ1/2 Spectral Line Half-width Hyper Red Green Blue nm I F=20mA C Capacitance Hyper Red Green Blue 100 100 pF V F=0V;f=1MHz VF [2] Forward Voltage Hyper Red Green Blue 2.2 3.2 3.3 2.8 V I F=20mA IR Reverse Current Hyper Red Green Blue uA V R=5V Min. 610 520 463 Parameter Hyper Red Green Blue Units Power dissipation 140 120 120 mW DC Forward Current 50 30 30 mA Peak Forward Current [1] 150 100 100 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Electrostatic Discharge Threshold (HBM) 3000 V 450 250 Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.

SPEC NO: DSAN6015 REV NO: V.3B DATE: JUL/25/2017 PAGE: 4 OF 8 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1201008811 AAA3528RGBS/K11/C8CC Hyper Red 20% 40% 60% 80% 100% 350 400 450 500 550 600 650 700 750 800 T a = 25 °C Red Wavelength (nm) Relative Intensity (a. u.) Blue Green 0.5 0.5 0.0 -90° -75° -60° -45° -30° -15° 75° 60° 45° 30° 0° 15° 90° 1.0 1.0 Ta = 25 °C

SPEC NO: DSAN6015 REV NO: V.3B DATE: JUL/25/2017 PAGE: 5 OF 8 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1201008811 Green 0.5 0.5 0.0 -90° -75° -60° -45° -30° -15° 75° 60° 45° 30° 0° 15° 90° 1.0 1.0 Ta = 25 °C

SPEC NO: DSAN6015 REV NO: V.3B DATE: JUL/25/2017 PAGE: 6 OF 8 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1201008811 Blue 0.5 0.5 0.0 -90° -75° -60° -45° -30° -15° 75° 60° 45° 30° 0° 15° 90° 1.0 1.0 Ta = 25 °C

SPEC NO: DSAN6015 REV NO: V.3B DATE: JUL/25/2017 PAGE: 7 OF 8 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1201008811 AAA3528RGBS/K11/C8CC Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm)

SPEC NO: DSAN6015 REV NO: V.3B DATE: JUL/25/2017 PAGE: 8 OF 8 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1201008811 PACKING & LABEL SPECIFICATIONS AAA3528RGBS/K11/C8CC Terms and conditions for the usage of this document 1. The information included in this docum ent reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the dat asheet. If customer usage exceeds the spec ified limits, Kingbright will not be respon sible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applicati ons. If customer's application ha s special reliability requirements or have life-threatening liabilitie s, such as automotive or m edical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes