AA5060SURC-G KINGBRIGHT | Alldatasheet

Document overview

  • Manufacturer or author: shchen@CN7049
  • PDF pages: 4

Technical content

Features

/G7ASINGLE COLOR. /G7ASUITABLE FOR ALL SMT ASSEMBLY AND SOLDER PROCESS. /G7AAVAILABLE ON TAPE AND REEL. /G7AIDEAL FOR BACKLIGHTING. /G7APACKAGE : 500PCS / REEL. /G7ARoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice.

SPEC NO: DSAD0898 REV NO: V.3 DATE: MAR/09/2005 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1201000537 Selection Guide Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA =25°C Absolute Maximum Ratings at TA =25°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Part No. Dice Lens Type Iv (mcd) @ 50mA Viewing Angle Min. Typ. 2θ1/2 AA5060SURC/G HYPER RED (InGaAlP) WATER CLEAR 480 750 100° Parameter Hyper Red Units Power dissipation 100 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C Symbol Parameter Device Typ. Max. Test ConditionsUnits λpeak Peak Wavelength Hyper Red 640 nm IF=20mA λD Dominant Wavelength Hyper Red 630 nm IF=20mA ∆λ 1/2 Spectral Line Half-width Hyper Red 22 nm IF=20mA C Capacitance Hyper Red 45 pF VF=0V;f=1MHz VF Forward Voltage Hyper Red 1.9 2.5 V IF=20mA IR Reverse Current Hyper Red 10 uA VR = 5V

SPEC NO: DSAD0898 REV NO: V.3 DATE: MAR/09/2005 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1201000537 Hyper Red AA5060SURC/G

SPEC NO: DSAD0898 REV NO: V.3 DATE: MAR/09/2005 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1201000537 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) AA5060SURC/G Remarks: If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength), the condition as follows: 1.Wavelength: +/-1nm (Test condition is based on the sorting standard). 2.Luminous intensity: +/-15% (Test condition is based on the sorting standard). 3.Forward voltage: +/-0.1V (Test condition is based on the sorting standard).