AA4040ZGCKT-AMT KINGBRIGHT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

© 2023 Kingbright. All Rights Reserved. Spec No: DSAQ1702 / 1201009483 Rev No: V.2B Date: 03/22/2023 Page 1 / 5 DESCRIPTIONS  The Green source color devices are made with InGaN on Sapphire Light Emitting Diode  Electrostatic discharge and power surge could damage the LEDs  It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs  All devices, equipments and machineries must be electrically grounded

FEATURES

 Single color  Suitable for all SMD assembly and solder process  Available on tape and reel  Ideal for backlighting  Package: 500 pcs / reel  Moisture sensitivity level: 3  Halogen-free  RoHS compliant

APPLICATIONS

 Traffic signaling  Backlighting (illuminated advertising , general lighting)  Interior and exterior automotive lighting  Substitution of micro incandescent lamps   Reading lamps  Signal and symbol luminaire for orientation  Marker lights (e.g. Steps, exit ways, etc)  Decorative and entertainment lighting  Indoor and outdoor commercial and residential architectural lighting ATTENTION Observe precautions for handling electrostatic discharge sensitive devices PACKAGE DIMENSIONS AA4040ZGCKT-AMT 4.0 x 4.0 mm Right Angle Surface Mount LED Lamp RECOMMENDED SOLDERING PATTERN (units : mm; tolerance : ± 0.1) Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. 4. LEDs will be provided from the listed bin codes. The bins delivered to the customer will be at Kingbright's discretion. Part Number Emitting Color (Material) Lens Type Iv (mcd) @ 20mA [2] Viewing Angle [1] Code. Min. Max. 2θ1/2 AA4040ZGCKT-AMT ■ Green (InGaN) Water Clear S 500 700 120° T 700 1000 U 1000 1300 SELECTION GUIDE

© 2023 Kingbright. All Rights Reserved. Spec No: DSAQ1702 / 1201009483 Rev No: V.2B Date: 03/22/2023 Page 2 / 5 ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C AA4040ZGCKT-AMT ABSOLUTE MAXIMUM RATINGS at TA=25°C Parameter Symbol Unit Power Dissipation PD 82 mW Reverse Voltage VR 5 V Junction Temperature Tj 115 °C Operating Temperature Top -40 to +100 °C Storage Temperature Tstg -40 to +110 °C DC Forward Current IF 20 mA Peak Forward Current IFM [1] 100 mA Thermal Resistance (Junction / Ambient) Rth JA [2] 470 °C/W Thermal Resistance (Junction / Solder point) Rth JS [2] 330 °C/W Value Electrostatic Discharge Threshold (HBM) - 450 V Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Rth JA ,Rth JS Results from mounting on PC board FR4 (pad size ≥ 16 mm 2 per pad). 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Notes: 1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. ) 2. Forward voltage: ±0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. 5. LEDs will be provided from the listed bin codes. The bins delivered to the customer will be at Kingbright's discretion. Parameter Symbol Emitting Color Value Unit Code. Min. Typ. Max. Wavelength at Peak Emission IF = 20mA λpeak Green - - 515 - nm Dominant Wavelength IF = 20mA λdom [1] Green 1 515 - 520 nm 2 520 - 525 3 525 - 530 Spectral Bandwidth at 50% Φ REL MAX IF = 20mA Δλ Green - - 35 - nm Capacitance C Green - - 45 - pF Forward Voltage IF = 20mA VF [2] Green - - 3.3 4.1 V Reverse Current (VR = 5V) IR Green - - - 50 µA Temperature Coefficient of λpeak IF = 20mA, -10°C ≤ T ≤ 100°C TCλpeak Green - - 0.05 - nm/°C Temperature Coefficient of λdom IF = 20mA, -10°C ≤ T ≤ 100°C TCλdom Green - - 0.03 - nm/°C Temperature Coefficient of VF IF = 20mA, -10°C ≤ T ≤ 100°C TCV Green - - -2.9 - mV/°C

© 2023 Kingbright. All Rights Reserved. Spec No: DSAQ1702 / 1201009483 Rev No: V.2B Date: 03/22/2023 Page 3 / 5 0.5 0.5 0.0 -90° -75° -60° -45° -30° -15° 75° 60° 45° 30° 0° 15° 90° 1.0 1.0 Ta = 25 °C 20% 40% 60% 80% 100% 350 400 450 500 550 600 650 700 750 800 T a = 25 °C Green Wavelength (nm) Relative Intensity (a. u.) RELATIVE INTENSITY vs. WAVELENGTH TECHNICAL DATA GREEN TAPE SPECIFICATIONS (units : mm) REEL DIMENSION (units : mm) REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS SPATIAL DISTRIBUTION AA4040ZGCKT-AMT 0.1 100 Ta = 25 °C Forward voltage (V) Forward current (mA) 0.01 0.1 11 0 1 0 0 Ta = 25 °C Forward current (mA) Luminous intensity normalised at 20 mA - 4 0 - 2 00 2 04 06 08 0 1 0 0 Ambient temperature (°C) Permissible forward current (mA) 0.0 0.5 1.0 1.5 2.0 2.5 -40 -20 0 20 40 60 80 100 Ambient temperature (°C) Luminous intensity normalised at T a = 25 °C Forward Current vs. Forward Voltage Luminous Intensity vs. Forward Current Forward Current Derating Curve Luminous Intensity vs. Ambient Temperature Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product.

© 2023 Kingbright. All Rights Reserved. Spec No: DSAQ1702 / 1201009483 Rev No: V.2B Date: 03/22/2023 Page 4 / 5 PACKING & LABEL SPECIFICATIONS AA4040ZGCKT-AMT RELIABILITY TEST ITEMS AND CONDITIONS The reliability of products shall be satisfied with items listed below LOT TOLERANCE PERCENT DEFECTIVE (LTPD) : 10% No. Test Item Standards Test Condition Test Times / Cycles Number of Damaged

1 Continuous operating test - Ta = 25°C, IF = maximum rated current * 1,000 h 0 / 22

2 High Temp. operating test EIAJ ED-4701/100(101) Ta = 100°C, IF = maximum rated current * 1,000 h 0 / 22 3 Low Temp. operating test - Ta = -40°C, IF = maximum rated current * 1,000 h 0 / 22 4 High temp. storage test EIAJ ED-4701/100(201) Ta = maximum rated storage temperature 1,000 h 0 / 22 5 Low temp. storage test EIAJ ED-4701/100(202) Ta = -40°C 1,000 h 0 / 22 6 High temp. & humidity storage test EIAJ ED-4701/100(103) Ta = 60°C, RH = 90% 1,000 h 0 / 22 7 High temp. & humidity operating test EIAJ ED-4701/100(102) Ta = 60°C, RH = 90% IF = maximum rated current * 1,000 h 0 / 22

8 Soldering reliability test EIAJ ED-4701/100(301)

Moisture soak: 30°C, 70% RH, 72h Preheat: 150~180°C (120s max.) Soldering temp: 260°C(10s) 2 times 0 / 18

9 Thermal shock operating test - Ta = -40°C(15min) ~ 100°C(15min)

IF = derated current at 100°C 1,000 cycles 0 / 22

10 Thermal shock test - Ta = -40°C(15min) ~ maximum rated

Storage temperature(15min) 1,000 cycles 0 / 22 11 Electric Static Discharge (ESD) EIAJ ED-4701/100(304) C = 100pF, R2 = 1.5KΩ V = 450V Once each Polarity 0 / 22

12 Vibration test - a = 196m/s², f = 100~2KHz, t = 48min for all xyz axes 4 times 0 / 22

  • : Refer to forward current vs. derating curve diagram

© 2023 Kingbright. All Rights Reserved. Spec No: DSAQ1702 / 1201009483 Rev No: V.2B Date: 03/22/2023 Page 5 / 5 AA4040ZGCKT-AMT CRITERIA FOR JUDGING DAMAGE Items Symbols Conditions Failure Criteria luminous Intensity lV IF = 20mA Testing Min. Value < Spec. Min. Value x 0.5 Forward Voltage VF IF = 20mA Testing Max. Value ≥ Spec. Max. Value x 1.2 Reverse Current IR VR = Maximum Rated Reverse Voltage Testing Max. Value ≥ Spec. Max. Value x 2.5 High temp. storage test - - Occurrence of notable decoloration, deformation and cracking PRECAUTIONARY NOTES 1. The information included in this document reflects represent ative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be rep roduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright applicati on notes available at https://www.KingbrightUSA.com/ApplicationNotes