AA4040SYC KINGBRIGHT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

SINGLE COLOR. SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER PROCESS. AVAILABLE ON TAPE AND REEL. IDEAL FOR BACKLIGHTING. PACKAGE : 500PCS / REEL RoHS COMPLIANT.

SPEC NO: DSAB3283 REV NO: V.6 DATE: JUN/30/2005 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP:1201000480 Selection Guid e Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T A =25 °C Absolute Maximum Ratings at T A =25 °C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Part No. Dice Lens Type Iv (mcd) @ 20mA Viewing Angle Min. Typ. 2θθθθ1/2 AA4040SYC SUPER BRIGHT YELLOW (InGaAIP) WATER CLEAR 50 120 90 ° Parameter Super Bright Yellow Units Power dissipation 125 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA Reverse Voltage 5 V Operating / Storage Temperature -40°C To +85°C Symbol Parameter Device Typ. Max. Test Conditions Units λpeak Peak Wavelength Super Bright Yellow 590 nm IF=20mA λD Dominant Wavelength Super Bright Yellow 588 nm IF=20mA ∆λ 1/2 Spectral Line Half -width Super Bright Yellow 28 nm IF=20mA C Capacitance Super Bright Yellow 25 pF VF=0V;f=1MHz VF Forward Voltage Super Bright Yellow 2.0 2.5 V IF=20mA IR Reverse Current Super Bright Yellow 10 uA VR = 5V

SPEC NO: DSAB3283 REV NO: V.6 DATE: JUN/30/2005 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP:1201000480 Super Bright Yellow AA4040SYC

SPEC NO: DSAB3283 REV NO: V.6 DATE: JUN/30/2005 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP:1201000480 AA4040SYC Tape Specifications (Units : mm ) Recommended Soldering Pattern (Units : mm )

SPEC NO: DSAB3283 REV NO: V.6 DATE: JUN/30/2005 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: B.H.LI ERP:1201000480 PACKING & LABEL SPECIFICATIONS AA4040SYC Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/ -1nm 2. Luminous Intensity: +/ -15% 3. Forward Voltage: +/ -0.1V Note: Accuracy may depend on the sorting parameters.