AA3021PR4S KINGBRIGHT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Features

z 3.0mm x 2.0mm, 1.3mm high, only minimum space required. z Suitable for compact optoelectronic applications. z Low power consumption. z Package : 2000pcs / reel. z Moisture sensitivity level : level 4. z RoHS compliant.

Description

The source color devices are made with InGaN Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications.

SPEC NO: DSAI7057 REV NO: V.2 DATE: SEP/23/2008 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.Chen ERP: 1201004237 Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might leads to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. 3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry. 4. The outer diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. The inner diameter of the nozzle should be as large as possible. 5. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup. 6. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production.

SPEC NO: DSAI7057 REV NO: V.2 DATE: SEP/23/2008 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.Chen ERP: 1201004237 Selection Guide Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Absolute Maximum Ratings at TA=25°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Part No. Dice Lens Type Viewing Angle [1] Min. Typ. 2 θ1/2 AA3021PR4S/Z-W2 Warm White (InGaN) WATER CLEAR 480 600 125° Iv (mcd) [2] @ 20mA Parameter Warm White Units Power dissipation 111 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. Units Test Conditions VF [1] Forward Voltage Warm White 3.2 3.7 V IF=20mA IR Reverse Current Warm White 10 uA VR = 5V C Capacitance Warm White 110 pF VF=0V;f=1MHz Min. CCT Color Temperature Warm White 2780 3000 3310 K IF=20mA Note: 1.Forward Voltage: +/-0.1V.

SPEC NO: DSAI7057 REV NO: V.2 DATE: SEP/23/2008 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.Chen ERP: 1201004237 Warm White AA3021PR4S/Z-W2

SPEC NO: DSAI7057 REV NO: V.2 DATE: SEP/23/2008 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.Chen ERP: 1201004237 AA3021PR4S/Z-W2 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 0.46 x y 2500 K 3000 K 4000 K 5000 K 6000 K 7000 K Bin x y 0.4674 0.4367 0.4541 0.4327 0.4272 0.3783 0.4379 0.3814 CCT: 2780~2930K 0.4541 0.4327 0.4405 0.4278 0.4163 0.3745 0.4272 0.3783 CCT: 2930~3120K 0.4405 0.4278 0.4258 0.4214 0.4047 0.3697 0.4163 0.3745 CCT: 3120~3310K W2 bin code

SPEC NO: DSAI7057 REV NO: V.2 DATE: SEP/23/2008 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.Chen ERP: 1201004237 AA3021PR4S/Z-W2 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm)

SPEC NO: DSAI7057 REV NO: V.2 DATE: SEP/23/2008 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.Chen ERP: 1201004237 PACKING & LABEL SPECIFICATIONS AA3021PR4S/Z-W2