AA3020ARWC-Z

AA3020ARWC-Z KINGBRIGHT | Alldatasheet

Document overview

• Manufacturer or author: yalin
• PDF pages: 8

Technical content

Features

z 3.0MM X 2.0MM, 1.4MM HIGH, ONLY MINIMUM SPACE REQUIRED. z SUITABLE FOR COMPACT OPTOELECTRONIC APPLICATIONS. z LOW POWER CONSUMPTION. z PACKAGE : 2000PCS / REEL. z MOISTURE SENSITIVITY LEVEL : LEVEL 4. z ELECTROSTATIC DISCHARGE THRESHOLD (HBM):1000V. z TYP. COLOR TEMPERATURE: 6500K z COLOR COORDINATES:X=0.31,Y=0.31 ACC. TO CIE1931(WHITE). z OPTICAL EFFICIENCY: 51.6 lm/W(TYP.) z COLOR REPRODUCTION INDEX: 80 z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications.

Applications

z traffic signaling. z backlighting (illuminated advertising , general lighting). z interior and exterior automotive lighting. z substitution of micr o incandescent lamps. z reading lamps. z signal and symbol luminaire for orientation. z marker lights (e.g. steps, exit ways, etc). z decorative and entertainment lighting. z indoor and outdoor commercial and residential architectural lighting.

Description

The source color devices are made with InGaN Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded.

SPEC NO: DSAH5317 REV NO: V.2 DATE: JUN/27/2007 PAGE: 2 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1201003012 Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might leads to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. 3. Do not stack together assembled PCBs containing exposed LEDs. Outside impact may scratch the silicone lens or damage the internal circuitry. 4. During surface-mounting, the pickup capillary diameter should be larger than the silicone lens to insure the capillary does not scratch or damage the lens.

SPEC NO: DSAH5317 REV NO: V.2 DATE: JUN/27/2007 PAGE: 3 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1201003012 Selection Guide Parameter Symbol Value Unit Power dissipation Pt 111 mW Reverse Voltage VR 5 V Junction temperature TJ 110 °C Operating Temperature Top -40 To +85 °C Storage Temperature Tstg -40 To +100 °C DC Forward Current IF 30 mA Peak Forward Current Note4 IFM 100 mA Thermal resistance Junction/ambient Note5 Junction/solder point Rth JA Rth JS 300 140 °C/W °C/W Absolute Maximum Ratings at TA=25°C Electrical / Optical Characteristics at TA=25°C Parameter Symbol Value Unit Chromaticity coordinate x acc.to CIE1931 IF=20mA [Typ.] X Note1 0.31 - Chromaticity coordinate y acc.to CIE1931 IF=20mA [Typ.] Y Note1 0.31 - Forward Voltage IF=20mA [Min.] VF Note2 2.7 V Forward Voltage IF=20mA [Typ.] 3.2 Forward Voltage IF=20mA [Max.] 3.7 Reverse Current (VR=5V) [Typ.] IR 0.01 μ A Reverse Current (VR=5V) [Max.] 10 Temperature coefficient of x IF=20mA, -10 ° C≤ T≤100 ° C [Typ.] TC x -0.1 10-3 /° C Temperature coefficient of y IF=20mA, -10 ° C≤ T≤100 ° C [Typ.] TCy -0.2 10-3 /° C Temperature coefficient of VF IF=20mA, -10 ° C≤ T≤100 ° C [Typ.] TCV -2.5 mV/° C Part No. Dice Lens Type luminous Intensity Note2 Iv(mcd) @ 20mA Viewing Angle Note1 Min. Typ. Min. Typ. 2 θ 1/2 AA3020ARWC/Z WHITE (InGaN) WATER CLEAR 650 1200 1500 3300 120 ° Φv (mlm) Note3 @ 20mA Notes: 1 .θ 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 5.Rth(J-A) Results from m ounting on PC board FR4 (pad size ≥ 16 mm 2 per pad), Notes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of ±0.01 in X and Y color coordinates. 2.Forward voltage is measured with a curr ent pulse of 10ms at a tolerance of ±0.1V.

SPEC NO: DSAH5317 REV NO: V.2 DATE: JUN/27/2007 PAGE: 4 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1201003012 White AA3020ARWC/Z Brightness codes luminous Intensity Note1 Iv(mcd) @ 20mA Φv (mlm) Note2 @ 20mA Code. Min. Max. Typ. T 650 1200 3260 U 900 1500 3350 V 1200 1800 3400 Notes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice.

SPEC NO: DSAH5317 REV NO: V.2 DATE: JUN/27/2007 PAGE: 5 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1201003012 AA3020ARWC/Z

SPEC NO: DSAH5317 REV NO: V.2 DATE: JUN/27/2007 PAGE: 6 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1201003012 AA3020ARWC/Z White CIE 0.22 0.23 0.24 0.25 0.26 0.27 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 a0 a1 b1 Reference CCT: 14000~9000k Reference CCT: 14000~9000k Reference CCT: 9000~5600k b2 b3 b4 Reference CCT: 9000~5600k Reference CCT: 9000~7000k Reference CCT: 7600~5600k c0 c1 Reference CCT: 5600~4600k Reference CCT: 6000~4600k b3 b1 b4 c0

SPEC NO: DSAH5317 REV NO: V.2 DATE: JUN/27/2007 PAGE: 7 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1201003012 AA3020ARWC/Z Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) Reel Dimension

SPEC NO: DSAH5317 REV NO: V.2 DATE: JUN/27/2007 PAGE: 8 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1201003012 PACKING & LABEL SPECIFICATIONS AA3020ARWC/Z