AA2214QBS-D-AMT

AA2214QBS-D-AMT KINGBRIGHT | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

Features

z High reliability LED package. z 2.2mm x 1.4mm, 1.3mm high. z Low power consumption. z Available on tape and reel. z Package : 2000pcs / reel. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES

SPEC NO: DSAL4009 REV NO: V.1 DATE: NOV/22/2010 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1201007405 Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might lead to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. 3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry. 4. The outer diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. The inner diameter of the nozzle should be as large as possible. 5. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup. 6. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production.

SPEC NO: DSAL4009 REV NO: V.1 DATE: NOV/22/2010 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1201007405 Selection Guide Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at Ta=25°C Absolute Maximum Ratings at Ta=25°C Notes: 1. Rth(j-a) Results from mounting on PC board FR4 (pad size ≥16 mm 2 per pad), 2. 1/10 Duty Cycle, 0.1ms Pulse Width. Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Viewing Angle [1] Code. Min. Max. 2 θ1/2 AA2214QBS/D-AMT Blue (InGaN) Water Clear M 80 120 120° N 120 200 P 200 300 Notes: 1.The dominant Wavelength (λ d) above is the setup value of the sorting machine. (Tolerance λ d : ±1nm. ) 2. Forward Voltage: +/-0.1V. Parameter Symbol Value Unit Code. Min. Typ. Max. Wavelength at peak emission IF=20mA λ peak 468 nm Dominant Wavelength IF=20mA λ dom [1] nm 1B 461 468 2A 464 471 2B 467 473 3A 469 475 3B 471 477 Reverse Current (VR = 5V) IR 50 uA Spectral bandwidth at 50%Φ REL MAX IF=20mA Δλ 25 nm Forward Voltage IF=20mA VF [2] - 3.3 4.0 V Temperature coefficient of λ peak IF=20mA, -10 ° C≤ T≤100 ° C TC λ peak 0.05 nm/° C Temperature coefficient of λ dom IF=20mA, -10 ° C≤ T≤100 ° C TC λ dom 0.03 nm/° C Temperature coefficient of VF IF=20mA, -10 ° C≤ T≤100 ° C TCV -2.5 mV/° C Parameter Symbol Value Unit Power dissipation PD 120 mW Junction temperature TJ 110 °C Operating Temperature Top -40 To +100 °C Storage Temperature Tstg -40 To +110 °C DC Forward Current[1] IF 30 mA Peak Forward Current [2] IFM 150 mA Electrostatic Discharge Threshold (HBM) 250 V Thermal Resistance (Junction/ambient) [1] Rth j-a 250 °C/W Reverse Voltage VR 5 V

SPEC NO: DSAL4009 REV NO: V.1 DATE: NOV/22/2010 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1201007405 Blue AA2214QBS/D-AMT

SPEC NO: DSAL4009 REV NO: V.1 DATE: NOV/22/2010 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1201007405 AA2214QBS/D-AMT Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm)

SPEC NO: DSAL4009 REV NO: V.1 DATE: NOV/22/2010 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1201007405 PACKING & LABEL SPECIFICATIONS AA2214QBS/D-AMT

SPEC NO: DSAL4009 REV NO: V.1 DATE: NOV/22/2010 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1201007405 Failure Criteria Items Symbols Conditions Failure Criteria luminous Intensity lv IF = 20mA Testing Min. Value <Spec.Min.Value x 0.5 Forward Voltage VF IF = 20mA Testing Max. Value ≥Spec.Max.Value x 1.2 Reverse Current IR VR = Maximum Rated Reverse Voltage Testing Max. Value ≥Spec.Max.Value x 2.5 High temp. storage test - - Occurrence of notable decoloration, deformation and cracking Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below Lot Tolerance Percent Defective (LTPD) : 10% No. Test Item Standards Test Condition Test Times / Cycles Number of Damaged

1 Continuous operating test - Ta =25°C ,IF = maximum rated current* 1,000 h 0 / 22

2 High Temp. operating test EIAJED- 4701/100(101) Ta = 100°C IF = maximum rated current* 1,000 h 0 / 22 3 Low Temp. operating test - Ta = -40°C, IF = maximum rated current* 1,000 h 0 / 22 4 High temp. storage test EIAJED- 4701/100(201) Ta = maximum rated storage temperature 1,000 h 0 / 22 5 Low temp. storage test EIAJED- 4701/100(202) Ta = -40°C 1,000 h 0 / 22 6 High temp. & humidity storage test EIAJED- 4701/100(103) Ta = 60°C, RH = 90% 1,000 h 0 / 22 7 High temp. & humidity operating test EIAJED- 4701/100(102) Ta = 60°C, RH = 90% IF = maximum rated current* 1,000 h 0 / 22

8 Soldering reliability test EIAJED-

4701/100(301) Moisture soak : 30°C,70% RH, 72h Preheat : 150~180°C(120s max.) Soldering temp : 260°C(10s) 3 times 0 / 18

9 Thermal shock operating test - Ta = -40°C(15min) ~ 100°C(15min)

IF = derated current at 100°C 1,000 cycles 0 / 22

10 Thermal shock test - Ta = -40°C(15min) ~ maximum rated

storage temperature(15min) 1,000 cycles 0 / 22

11 Electric Static Discharge (ESD) EIAJED-

4701/100(304) C = 100pF , R2 = 1.5KΩ V = 250V Once each Polarity 0 / 22

12 Vibration test - a = 196m/s² , f = 100~2KHz ,

t = 48min for all xyz axes 4 times 0 / 22 * : Refer to forward current vs. derating curve diagram