AA105301111 TAOGLAS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 9
Technical content
SPE-12-8-024/F/SS Page 1 of 9 SPECIFICATION Part No. : AA.105.301111 Product Name : Titan GPS/GALILEO Antenna AA.105 Features : Magnetic Mount Covert stylish design Wide band input voltage Gain can be adjusted for your application (10dB~31dB) IP-67 Waterproof 3M RG174 SMA (M) Straight Cable and connector customizable RoHS Compliant
SPE-12-8-024/F/SS Page 2 of 9 1. Introduction Our AA.105 Titan magnetic mount external antenna is ideal for robust, covert installations where durability and small size is paramount. It is used in telematics and M2M applications, for example in commercial vehicle installations for fleet management. It is fully waterproof to IP67 rating. Standard cable and connector version is 3 metre RG174 and SMA(M). Cable length and connector type are customizable upon request. 2. Specifications ELECTRICAL Outline Dimension 25*25*4mm Ground Size 25*25*4mm Centre Frequency 1575.42±3MHz Bandwidth 10MHz VSWR 1.92 Max Axial ratio 3dB Typ. Gain @ Zenith 2dBi Typ. Impedance 50Ω Polarization RHCP LNA Frequency 1575.42MHz Impedance 50Ω VSWR 1.92 Max. Gain 30dB Typ. Gain at Connector* 28.4dB DC Power Input 2.7~5V Noise Figure 1.5dB Typ. Power Consumption 4.7mA @2.7V 6mA @3.3V 10.3mA @5V Operating temp -40°C ~ +85°C Storage Temp -40°C ~ +90°C *Formula = Patch Antenna Average Gain + LNA typical gain – RG174 cable loss @1.2dB per meter = Gain at connectorGain at the Connector - Patch Gain 2dB + LNA Gain 30dB – Cable loss of 1.2dB per metre (@3m = 3.6dB) = 28.4dB approx.
SPE-12-8-024/F/SS Page 3 of 9 3. Ceramic Antenna S11 (with housing)
SPE-12-8-024/F/SS Page 4 of 9 4. Ceramic Antenna Radiation Pattern (with housing)
SPE-12-8-024/F/SS Page 5 of 9 5. LNA gain 6. LNA S22
SPE-12-8-024/F/SS Page 6 of 9 7. Antenna Field Trial Results Antenna was connected to a U-blox EVK-6H evaluation kit under open sky conditions. 1.8 V Cold Start needs typically 40 seconds. 3.3V Cold Start needs typically 40 seconds.
SPE-12-8-024/F/SS Page 7 of 9 8. Drawing RG-174 cable attenuation(dB/100mm) RG-174 67 110 127 153 168 183 207 229 252 272 291 311
SPE-12-8-024/F/SS Page 8 of 9 9. Packaging
SPE-12-8-024/F/SS Page 9 of 9 Taoglas makes no warranties based on the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Taoglas reserves all rights to this document and the information contained herein. Reproduction, use or disclosure to third parties without express permission is strictly prohibited. Copyright © Taoglas Ltd.