AA100-59LF

AA100-59LF SKYWORKS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

Features

• Attenuation: 4 dB steps to 28 dB
• Single positive control voltage: 3 V to 5 V
• Small MSOP-8 package
• Available lead (Pb)-free and RoHS-compliant MSL-1 @ 260 °C per JEDEC J-STD-020

Description

The AA100-59LF is a 3 bit, single positive control, 4 dB step GaAs IC FET digital attenuator in a low cost MSOP-8 plastic package. For positive operation external DC blocking capacitors are required on all RF ports. The AA100-59LF is particularly suited where high attenuation accuracy, low insertion loss and low intermodulation products are required. Parameter Frequency Min. Typ. Max. Unit Insertion loss(1) 0.75–2 GHz 1.8 2.1 dB Attenuation range 0.75–2 GHz 28 dB Attenuation accuracy(2) 0.75–1 GHz ± (0.2 + 3% of dB Attenuation setting in dB) 0.75–2 GHz ± (0.3 + 3% of dB Attenuation setting in dB) VSWR (I/O) 0.75–2 GHz 1.5:1 2.0:1 Electrical Specifications at 25 °C VCTL = 0, 3 V, ZO = 50 Ω, unless otherwise noted 1. Insertion loss changes by 0.003 dB/°C. 2. Attenuation referenced to insertion loss. Skyworks offers lead (Pb)-free, RoHS (Restriction of Hazardous Substances)-compliant packaging. NEW 8 dB 4 dB 16 dB V1 RF Input/Output RF Input/Output Block Diagram

Skyworks Solutions, Inc.  Phone [781] 376-3000  Fax [781] 376-3100  sales@skyworksinc.com  www.skyworksinc.com February 28, 2006  Skyworks Proprietary Information  Products and Product Information are Subject to Change Without Notice .  200434 Rev. C DATA SHEET • AA100-59LF Parameter Condition Frequency Min. Typ. Max. Unit Switching characteristics Rise, fall 10/90% or 90/10% RF 0.7 µs On, off 50% CTL to 90/10% RF 1.0 µs Video feedthru T RISE = 1 ns, BW = 500 MHz 50 mV Input power for 1 dB compression V S = 3 V 0.75–2 GHz 20 dBm VS = 5 V 0.75–2 GHz 26 dBm Intermodulation intercept point (IIP3) For two-tone input power 10 dBm VCTL = 3 V 0.75–2 GHz 32 dBm VCTL = 5 V 0.75–2 GHz 45 dBm Supply voltage VHIGH - 0.2 V HIGH + 0.2 Control voltages V LOW = 0 to 0.2 V @ 20 µA max. VHIGH = 3 V @ 100 µA max. to 5 V @ 200 µA max. VS = VHIGH ± 0.2 V Operating Characteristics at 25 °C VCTL = 0, 3 V, ZO = 50 Ω, unless otherwise noted Frequency (GHz) Insertion Loss vs. Frequency dB Frequency (GHz) Attenuation vs. Frequency (All States) dB 0.5 0.5 1.0 1.0 1.5 1.5 2.0 2.0 Frequency (GHz) VSWR vs. Frequency (All States) Typical Performance Data 8 dB 4 dB 16 dB VS GND 100 pF 100 pF 10 kΩ GND GND 1234 5 6 78 Pin Out (Top View)

DATA SHEET  AA100-59LF Skyworks Solutions, Inc.  Phone [781] 376-3000  Fax [781] 376-3100  sales@skyworksinc.com  www.skyworksinc.com 200434 Rev. C  Skyworks Proprietary Information  Products and Product Information are Subject to Change Without Notice.  February 28, 2006 3 Performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the Absolute Maximum specifications. Exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty. CAUTION: Although this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce poten- tials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times. Characteristic Value RF input power 1 W > 500 MHz 0/8 V

0.5 W @ 50 MHz 0/8 V

Control voltage -0.2 V, +8 V Operating temperature -40°C to +85°C Storage temperature -65°C to +150°C Supply voltage V HIGH ± 0.2 V Absolute Maximum Ratings VHIGH = 3 to 5 V (VS = VHIGH ± 0.2 V). V1 V2 V3 Attenuation 16 dB 4 dB 8 dB J1–J2 VHIGH VHIGH VHIGH Ins. loss VHIGH 0V HIGH 4 dB VHIGH VHIGH 08 d B VHIGH 0 0 12 dB 0V HIGH VHIGH 16 dB

00 V HIGH 20 dB

0.012 (0.30 mm)Pin 1 Pin 1 Indicator + 0.006 (0.15 mm) 7.0˚ Typ.0.038 (0.95 mm) 0.030 (0.75 mm) 0.017 (0.43 mm) 8.0˚ Max. 0.028 (0.70 mm) 0.016 (0.40 mm) 0.007 (0.18 mm) ± 0.005 (0.12 mm) 0.006 (0.15 mm) 0.002 (0.05 mm) - 0.002 (0.05 mm) 0.0256 (0.65 mm) Typ. 0.118 (3.00 mm) ± 0.004 (0.1 mm) SQ. 0.193 (4.90 mm) Ref. Recommended Solder Reflow Profiles Refer to the “Recommended Solder Reflow Profile” Application Note. Tape and Reel Information Refer to the “Discrete Devices and IC Switch/Attenuators Tape and Reel Package Orientation” Application Note.

Skyworks Solutions, Inc.  Phone [781] 376-3000  Fax [781] 376-3100  sales@skyworksinc.com  www.skyworksinc.com February 28, 2006  Skyworks Proprietary Information  Products and Product Information are Subject to Change Without Notice .  200434 Rev. C DATA SHEET  AA100-59LF Copyright © 2002, 2003, 2004, 2005, Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference.