A9P OMRON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

1 Pushbutton Switch (Microminiaturize) A9P

Pushbutton Switch (Microminiaturize) A9P Two-point clip contact mechanism combined with see-saw action.

  • Gold-plated clip contact and cleaning mechanisms ensure high reliability.
  • Specially designed to allow no grease entry into the contact portion.
  • Sealed against flux entry and a built-in "O-ring ensures immersion wash ability.
  • Washable models. (IP64)
  • RoHS

Ordering Information

  • With button Note: (ON) is Momentary
  • Without button Note: 1. (ON) is Momentary 2. Plunger coller Gray: Alternate Ivory: Momentary
  • Button Available in a wide range of color. Please order separately excluding red. Terminal style DIP terminal Right Angle Vertical Mount Switching Function Single Pole Double Throw Double Pole Double Throw Single Pole Double Throw Double Pole Double Throw Single Pole Double Throw Double Pole Double Throw ON ON A9P11-0031 A9P21-0031 A9P11-0032 A9P21-0032 A9P11-0033 A9P21-0033 ON (ON) A9P13-0031 A9P23-0031 A9P13-0032 A9P23-0032 A9P13-0033 A9P23-0033 Terminal style DIP terminal Right Angle Vertical Mount Switching Function Single Pole Double Throw Double Pole Double Throw Single Pole Double Throw Double Pole Double Throw Single Pole Double Throw Double Pole Double Throw ON ON A9P11-0011 A9P21-0011 A9P11-0012 A9P21-0012 A9P11-0013 A9P21-0013 ON (ON) A9P13-0011 A9P23-0011 A9P13-0012 A9P23-0012 A9P13-0013 A9P23-0013 Color White Black Gray Blue Green Yellow A9P-011 A9P-021 A9P-031 A9P-041 A9P-051 A9P-061 Configuration 5 dia.

Pushbutton Switch (Microminiaturize) A9P 2 Specifications Dimensions (Unit: mm)

  • DIP terminal
  • Right Angle Switching capacity AC/DC 60V 50mA, AC/DC 20mV 1Ж A (minimum current) Ambient temperature -20 to 80 °C 60% RH Max. (with no icing or condensation) Ambient humidity operating : 45% to 85% (5 to 35 °C ) Insulation resistance 1000 MΩ min (Initial value) Contact resistance 50 mΩ max (Initial value) Dielectric strength 500VAC for 1 min between terminals, between terminals and ground Vibration resistance Malfunction Malfunction: 10 to 55Hz, 1.5-mm double amplitude Shock resistance Malfunction Malfunction: 500m/s2 min Life expectancy Mechanical 50,000 operations min Electrical 50,000 operations min Operating force Alternate: 1.96 to 6.86 N / Momentary: 1.47 to 3.43 N Weight DIP terminal 0.7 g Right Angle 0.9 g Vertical Mount 0.9 g 10±0.5 5.6±0.3 8.4±0.3 JAPAN JAPAN 5 dia. 5.5 47 . 5 stroke 1.5 0.6 5.08 With button Without button 5.6±0.3 3.3±0.3 8.4±0.3 0.6 10±0.5 5 dia. 2.6 dia. stroke 1.5 7.5 JAPAN JAPAN 5.08 (1) (3) (2) (4) (6) (5) (1) (3) (4) (6) (5) Single Pole Type Double Pole Type 2.54 0.4 5.6±0.3 3.2 8.4±0.3 JAPAN JAPAN 5 dia. 10±0.55.5 4 7.5 0.6 5.08 0.7 5.08 0.4 0.4 2.545.085.84 0.3 0.6 10±0.5 5.6±0.3 3.3±0.3 8.4±0.3 5 dia. 2.6 dia. 7.5 JAPAN JAPAN 5.08 3.2 0.7 5.08 Single Pole Type Double Pole Type (1) (3) (2) (4) (6) (5) (4) (6) (5) With button Without button

3 Pushbutton Switch (Microminiaturize) A9P

  • Vertical Mount
  • PCB Dimensions (Top View) Switching Function / Internal Connections Note: (ON) is Momentary Switching Function Single Pole Type ON ON ON (ON) Double Pole Type ON ON ON (ON) 5.6±0.3 3.2 8.4±0.3 JAPAN JAPAN 5 dia. 10±0.55.5 4 7.5 0.6 2.54 2.54 5.085.84 0.7 2.54 0.3 2.6 dia. 10±0.53.3±0.3 7.5 JAPAN JAPAN 5.6±0.3 8.4±0.35 dia. 3.2 0.7 2.54 0.6 2.54 2.545.085.84

0.3 Single Pole Type Double Pole Type

(1) (3) (2) (4) (6) (5) (4) (6) (5) With button Without button Single Pole Type Double Pole Type 5-0.8 dia. 6-0.8 dia. 2.54 2.54 5.085.08 (1) (3) (4) (6) (5) (4) (6) (5) (1) (3) (2) Single Pole Type Double Pole Type 5-0.8 dia. 8-0.8 dia. 2.54 2.54 5.08 5.08 5.08 5.08 (3) (2) (1) DIP terminal Vertical Mount Single Pole Type Double Pole Type 5-0.8 dia. 8-0.8 dia. 2.54 2.54 5.08 5.08 5.08 5.08 (3) (2) (1) Single Pole Type Double Pole Type 5-0.8 dia. 8-0.8 dia. 2.54 5.08 5.08 5.08 5.08 (3) (1) (2) (6) (4) (5) (6) (4) (5) Right Angle (4) 5 4 2 1 5 4 2 1 (3) 5 4 (6)

In the interest of product improvement, specifications are subject to change without notice. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. A170-E1-01 OMRON Corporation Electronic Components Company Switch Division Manual Switch Department Shiokoji Horikawa, Shimogyo-ku, Kyoto, 600-8530 Japan Safety Precautions

  • Cautions Use the Pushbutton Switch within the rated voltage and current ranges, otherwise the Pushbutton Switch may have a shortened life expectancy, radiate heat, or burn out. This particularly applies to the instantaneous voltages and currents when switching.
  • Handling Do not apply excessive operating force to the Switch. Otherwise the Switch may be damaged or deformed, and the switch mechanism may malfunction as a result. Apply an operating force not exceeding 9.8 N. Apply the operating load from the side of the striker. Do not apply a load from an angle or from above the striker. Doing so may deform the Switch contact.
  • Soldering Observe the following conditions when soldering the Pushbutton Switch. Automatic Soldering Bath Soldering temperature: 260°C max. (Preheating: 100°C 120 s) Soldering time: 5 s max. Manual Soldering Soldering temperature: 350°C at the tip of the soldering iron. Soldering time: 3 s max.
  • Washing Apply alcohol or fluorine based solvents to clean. Do not clean the switch immediately after soldering. Wait for at least five minutes after soldering before cleaning. Ultrasonic cleaning is not available dip into the switch washing agents for two minute maximum.
  • Using Flux Making mistakes in the type of flux or in the amount or method in which it is applied can cause flux to enter the interior of the Switch, with adverse effects on Switch performance. Assess the proper flux, conditions, and methods prior to using it.
  • RoHS Compliant The "RoHS Compliant" designation indicates that the listed models do not contain the six hazardous s ubstances covered by the RoHS Directive. Reference: The following standards are used to determine compli- ance for the six substances.
  • Lead: 1,000 ppm max.
  • Mercury: 1,000 ppm max.
  • Cadmium: 100 ppm max.
  • Hexavalent chromium: 1,000 ppm max.
  • PBB: 1,000 ppm max.
  • PBDE: 1,000 ppm max.
  • Environment for Storage and Use To prevent discoloration of the terminals and other problems during storage, do not store the switch in locations subject to the following conditions. 1. High temperatures or humidity 2. Corrosive gases 3. Direct sunlight Also, the switch is not waterproof or splash-resistant. Do not install or use the switch in locations that are subject to contact with water. Do not subject the switch to freezing or condensation.
  • Packing 100 per plastoc bag. Printed in Japan 0108 (0108)