A79T

IRLML9301TRPBF IRF | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 10

Technical content

HEXFET/G174/G32Power MOSFET PD - 96310 www.irf.com 1 ORDERING INFORMATION: See detailed ordering and shipping information on the last page of this data sheet. Notes/G32/G129 through /G132 are on page 10 Micro3TM (SOT-23) IRLML9301TRPbF Features and Benefits Features Benefits /c54 /c42 /c20 /c21 /c39/c22 Application(s)

• /G83/G121/G115/G116/G101/G109/G47/G76/G111/G97/G100/G32/G83/G119/G105/G116/G99/G104 VDS -30 V VGS Max ± 20 V RDS(on) max (@VGS = -10V) 64 mΩ RDS(on) max (@VGS = -4.5V) 103 mΩ Symbol Parameter Units VDS Drain-Source Voltage V ID @ TA = 25°C Continuous Drain Current, V GS @ 10V ID @ TA = 70°C Continuous Drain Current, V GS @ 10V IDM Pulsed Drain Current PD @TA = 25°C Maximum Power Dissipation PD @TA = 70°C Maximum Power Dissipation Linear Derating Factor W/°C VGS Gate-to-Source Voltage V TJ, TSTG Junction and Storage Temperature Range °C Thermal Resistance Symbol Parameter Typ. Max. Units RθJA Junction-to-Ambient /c101 ––– 100 RθJA Junction-to-Ambient (t<10s) /c102 ––– 99 °C/W A Max. -3.6 -2.9 -55 to + 150 ± 20 0.01 -30 1.3 0.8 -15 W Low RDS(on) ( ≤ 64mΩ) Lower switching losses Industry-standard pinout Multi-vendor compatibility Compatible with existing Surface Mount Techniques results in Easier manufacturing RoHS compliant containing no lead, no bromide and no halogen ⇒ Environmentally friendly MSL1, Consumer qualification Increased reliability

/G73/G82/G76/G77/G76/G57/G51/G48/G49/G84/G82/G80/G98/G70 2 www.irf.com G D S Electric Characteristics @ TJ = 25°C (unless otherwise specified) Symbol Parameter Min. Typ. Max. Units V(BR)DSS Drain-to-Source Breakdown Voltage -30 ––– ––– V ∆V(BR)DSS/∆TJ Breakdown Voltage Temp. Coefficient ––– 0.02 ––– V/°C ––– 51 64 ––– 82 103 VGS(th) Gate Threshold Voltage -1.3 ––– -2.4 V IGSS Gate-to-Source Forward Leakage ––– ––– -100 Gate-to-Source Reverse Leakage ––– ––– 100 RG Internal Gate Resistance ––– 12 ––– Ω gfs Forward Transconductance 5.0 ––– ––– S Qg Total Gate Charge ––– 4.8 ––– Qgs Gate-to-Source Charge ––– 1.2 ––– Qgd Gate-to-Drain ("Miller") Charge ––– 2.5 ––– td(on) Turn-On Delay Time ––– 9.6 ––– td(off) Turn-Off Delay Time ––– 16 ––– Ciss Input Capacitance ––– 388 ––– Coss Output Capacitance ––– 93 ––– Crss Reverse Transfer Capacitance ––– 65 ––– Source - Drain Ratings and Characteristics Symbol Parameter Min. Typ. Max. Units IS Continuous Source Current (Body Diode) ISM Pulsed Source Current (Body Diode)/c3/c99 VSD Diode Forward Voltage ––– ––– -1.2 V trr Reverse Recovery Time ––– 14 21 ns Qrr Reverse Recovery Charge ––– 7.2 11 nC pF A -1.3 -15 VDD =-15V/c100 nA nC ns VDS = VGS, ID = -10µA VDS =-24V, VGS = 0V VDS = -24V, VGS = 0V, TJ = 125°C RDS(on) VGS = -4.5V, ID = -2.9A /c100Static Drain-to-Source On-Resistance Drain-to-Source Leakage Current µA mΩ Conditions VGS = 0V, ID = -250µA Reference to 25°C, ID = -1mA VGS = -10V, ID = -3.6A /c100 MOSFET symbol showing the VDS =-15V Conditions VGS = -4.5V VGS = 0V VDS = -25V ƒ = 1.0KHz RG = 6.8Ω VGS = -4.5V /c100 di/dt = 100A/µs /c100 VGS = -20V VGS = 20V TJ = 25°C, IS = -1.3A, VGS = 0V /c100 integral reverse p-n junction diode. VDS = -10V, ID =-3.6A ID = -3.6A ID = -1A TJ = 25°C, VR = -24V, IF=-1.3A

/G73/G82/G76/G77/G76/G57/G51/G48/G49/G84/G82/G80/G98/G70 www.irf.com 3 Fig 3. Typical Transfer Characteristics Fig 2. Typical Output CharacteristicsFig 1. Typical Output Characteristics Fig 4. Normalized On-Resistance Vs. Temperature 0.1 1 10 100 VDS, Drain-to-Source Voltage (V) 0.01 0.1 100 ID, Drain-to-Source Current (A) VGS TOP -10V -4.5V -3.7V -3.5V -3.3V -3.0V -2.7V BOTTOM -2.5V ≤60µs PULSE WIDTH Tj = 25°C -2.5V 0.1 1 10 100 VDS, Drain-to-Source Voltage (V) 0.1 100 ID, Drain-to-Source Current (A) VGS TOP -10V -4.5V -3.7V -3.5V -3.3V -3.0V -2.7V BOTTOM -2.5V ≤60µs PULSE WIDTH Tj = 150°C -2.5V VGS, Gate-to-Source Voltage (V) 0.1 100 ID, Drain-to-Source Current (A) TJ = 25°C TJ = 150°C VDS = -15V ≤60µs PULSE WIDTH -60 -40 -20 0 20 40 60 80 100 120 140 160 TJ , Junction Temperature (°C) 0.6 0.8 1.1 1.4 1.6 RDS(on) , Drain-to-Source On Resistance (Norm alized) ID = -3.6A VGS = -10V

/G73/G82/G76/G77/G76/G57/G51/G48/G49/G84/G82/G80/G98/G70 4 www.irf.com Fig 6. Typical Gate Charge Vs. Gate-to-Source Voltage Fig 5. Typical Capacitance Vs. Drain-to-Source Voltage Fig 8. Maximum Safe Operating AreaFig 7. Typical Source-Drain Diode Forward Voltage 02468 1 0 1 2 QG, Total Gate Charge (nC) VGS, Gate-to-Source Voltage (V) VDS= -24V VDS= -15V VDS= -6V ID= -3.6A VSD, Source-to-Drain Voltage (V) 0.1 100 ISD, Reverse Drain Current (A) TJ = 25°C TJ = 150°C VGS = 0V 0 1 10 100 VDS, Drain-to-Source Voltage (V) 0.01 0.1 100 ID, Drain-to-Source Current (A) OPERATION IN THIS AREA LIMITED BY RDS(on) TA = 25°C Tj = 150°C Single Pulse 100µsec 1msec 10msec 1 10 100 VDS, Drain-to-Source Voltage (V) 100 1000 10000 C, Capacitance (pF) VGS = 0V, f = 1 KHZ Ciss = Cgs + Cgd, C ds SHORTED Crss = Cgd Coss = Cds + Cgd CossCrss Ciss

/G73/G82/G76/G77/G76/G57/G51/G48/G49/G84/G82/G80/G98/G70 www.irf.com 5 Fig 11. Typical Effective Transient Thermal Impedance, Junction-to-Ambient Fig 9. Maximum Drain Current Vs. Ambient Temperature VDS 90% 10% VGS td(on) tr td(off) tf Fig 10b. Switching Time Waveforms Fig 10a. Switching Time Test Circuit /G86/G68/G83 /G80/G117/G108/G115/G101/G32/G87/G105/G100/G116/G104/G32≤ 1 /G181/G115 /G68/G117/G116/G121/G32/G70/G97/G99/G116/G111/G114/G32≤ 0.1 % /G82/G68 /G86/G71/G83 /G82/G71 /G68/G46/G85/G46/G84/G46 /G86/G71/G83 -/G86/G68/G68 25 50 75 100 125 150 TA , Ambient Temperature (°C) 0.6 1.2 1.8 2.4 3.6 4.2 ID, Drain Current (A) 1E-006 1E-005 0.0001 0.001 0.01 0.1 1 10 100 t1 , Rectangular Pulse Duration (sec) 0.001 0.01 0.1 100 1000 Therm al Response ( Z thJA ) °C/W 0.20 0.10 D = 0.50 0.02 0.01 0.05 SINGLE PULSE ( THERMAL RESPONSE ) Notes: 1. Duty Factor D = t1/t2 2. Peak Tj = P dm x Zthja + TA

/G73/G82/G76/G77/G76/G57/G51/G48/G49/G84/G82/G80/G98/G70 6 www.irf.com Fig 13. Typical On-Resistance Vs. Drain Current Fig 12. Typical On-Resistance Vs. Gate Voltage Fig 14b. Gate Charge Test CircuitFig 14a. Basic Gate Charge Waveform QG QGS QGD VG Charge /G86/G71/G83 D.U.T. VDS IDIG 3mA VGS .3µF 50KΩ .2µF12V Current Regulator Same Type as D.U.T. Current Sampling Resistors 2 4 6 8 10 12 14 16 18 20 VGS, Gate -to -Source Voltage (V) 100 140 180 RDS(on), Drain-to -Source On Resistance (m ID = -3.6A TJ = 25°C TJ = 125°C 0 5 10 15 20 25 30 35 ID, Drain Current (A) 100 200 300 400 500 RDS(on), Drain-to -Source On Resistance (mΩ) Vgs = -10V Vgs = -4.5V

/G73/G82/G76/G77/G76/G57/G51/G48/G49/G84/G82/G80/G98/G70 www.irf.com 7 Fig 15. Typical Threshold Voltage Vs. Junction Temperature /G70/G105/G103/G32/G49/G54/G46/G32/G32/G32Typical Power Vs. Time 1E-005 0.0001 0.001 0.01 0.1 1 10 Time (sec) 100 Power (W -75 -50 -25 0 25 50 75 100 125 150 TJ , Temperature ( °C ) 0.5 1.0 1.5 2.0 2.5 VGS(th), Gate threshold Voltage (V) ID = 10uA ID = 25uA ID = 250uA

/G73/G82/G76/G77/G76/G57/G51/G48/G49/G84/G82/G80/G98/G70 8 www.irf.com Micro3 (SOT-23/TO-236AB) Part Marking Information /G77/G105/G99/G114/G111/G51/G32/G40/G83/G79/G84/G45/G50/G51/G41/G32/G80/G97/G99/G107/G97/G103/G101/G32/G79/G117/G116/G108/G105/G110/G101 /G68/G105/G109/G101/G110/G115/G105/G111/G110/G115/G32/G97/G114/G101/G32/G115/G104/G111/G119/G110/G32/G105/G110/G32/G109/G105/G108/G108/G105/G109/G101/G116/G101/G114/G115/G32/G40/G105/G110/G99/G104/G101/G115/G41 /G78/G111/G116/G101/G58/G32/G70/G111/G114/G32/G116/G104/G101/G32/G109/G111/G115/G116/G32/G99/G117/G114/G114/G101/G110/G116/G32/G100/G114/G97/G119/G105/G110/G103/G32/G112/G108/G101/G97/G115/G101/G32/G114/G101/G102/G101/G114/G32/G116/G111/G32/G73/G82/G32/G119/G101/G98/G115/G105/G116/G101/G32/G97/G116/G58/G32/G104/G116/G116/G112/G58/G47/G47/G119/G119/G119/G46/G105/G114/G102/G46/G99/G111/G109/G47/G112/G97/G99/G107/G97/G103/G101/G47 e E D A B 0.15 [0.006] 1 2 M CBA NOTES: b A ABCM0.20 [0.008] 0.10 [0.004] C C 1. DIMENSIONING & TOLERANCING PER ANSI Y14.5M-1994 2. DIMENSIONS ARE SHOWN IN MILLIMETERS [INCHES]. 3. CONTROLLING DIMENSION: MILLIMETER. 4. DATUM PLANE H IS LOCATED AT THE MOLD PARTING LINE. 5. DATUM A AND B TO BE DETERMINED AT DATUM PLANE H. 6. DIMENSIONS D AND E1 ARE MEASURED AT DATUM PLANE H. DIMENSIONS DOES NOT INCLUDE MOLD PROTRUSIONS OR INTERLEAD FLASH. MOLD PROTRUSIONS OR INTERLEAD FLASH SHALL NOT EXCEED 0.25 MM [0.010 INCH] PER SIDE. 7. DIMENSION L IS THE LEAD LENGTH FOR SOLDERING TO A SUBSTRATE. 8. OUTLINE CONFORMS TO JEDEC OUTLINE TO-236 AB. 0.89 1.12 SYMBOL MAXMIN b 0.01 0.10 c 0.30 0.50 D 0.08 0.20 E 2.80 3.04 2.10 2.64 e 1.20 1.40 A

0.95 BSC

L 0.40 0.60 MILLIMETERS A2 0.88 1.02 e1 1.90 BSC REF0.54L1 BSC0.25L2 /c19/c17/c19/c20/c19 BSC /c19/c17/c19/c21/c20 REF /c37/c54/c38/c3/c19/c17/c19 /c26/c24 /c19/c17/c19 /c23/c19/c19/c17/c19 /c22/c24 INCHES /c19/c17/c19 /c21/c23/c19/c17/c19 /c20/c25 /c37/c54/c38/c19/c17/c19/c22/c26 /c19/c17/c19/c24/c24/c19/c17/c19/c23/c26 /c19/c17/c20 /c19/c23/c19/c17 /c19/c27/c22 /c19/c17/c20 /c21/c19/c19/c17/c20/c20/c19 /c19/c17 /c19/c19/c27/c19/c17 /c19/c19/c22 /c19/c17/c19 /c21/c19/c19/c17/c19 /c20/c21 /c19/c17/c19 /c19/c230.0004 MIN MAX /c19/c17/c19 /c23/c23/c19/c17/c19 /c22/c24 DIMENSIONS 0.972 1.900 Recommended Footprint 0.802 0.950 2.742 3X L c H 4 L1 /c41/c3 /c32 /c3 /c44 /c53 /c47/c48 /c47 /c25/c23/c19/c20 /c36/c21/c19/c19/c20 /c36 /c21/c26 /c49 /c82/c87/c72/c86 /c29/c3/c55 /c75/c76/c86/c3/c83/c68/c85/c87/c3 /c80 /c68 /c85/c78/c76/c81/c74/c3/c76/c81/c73 /c82 /c85/c80/c68/c87/c76/c82/c81/c3 /c68/c83/c83/c79/c76/c72/c86 /c3 /c87/c82 /c3 /c71/c72 /c89/c76/c70/c72 /c86/c3/c83/c85/c82/c71/c88/c70/c72/c71/c3/c68/c73 /c87/c72 /c85 /c3/c19/c21 /c18/c21 /c25 /c18/c21 /c19/c19 /c20 /c47/c50 /c55/c3 /c38/c50 /c39/c40 /c47/c40/c36/c39/c3 /c41 /c53/c40/c40 /c39/c36 /c55 /c40 /c3 /c38/c50/c39/c40 /c40/c3 /c32 /c3 /c44 /c53/c47/c48 /c47/c25/c23/c19/c21 /c59 /c3 /c32/c3 /c51 /c36/c53/c55/c3 /c49/c56/c48 /c37 /c40/c53/c3 /c38 /c50 /c39 /c40/c3 /c53/c40 /c41/c40/c53 /c40/c49/c38/c40 /c29 /c39/c3 /c32 /c3 /c44 /c53 /c47/c48 /c47 /c24/c20/c19/c22 /c38/c3 /c32 /c3 /c44 /c53 /c47/c48 /c47 /c25/c22/c19/c21 /c37/c3 /c32 /c3 /c44 /c53/c47/c48 /c47/c21/c27/c19/c22 /c36/c3 /c32 /c3 /c44 /c53 /c47/c48 /c47 /c21/c23/c19/c21 /c58 /c3/c32 /c3/c11/c20 /c16 /c21 /c25 /c12/c3/c44 /c41 /c3 /c51 /c53 /c40 /c38 /c40 /c39 /c40 /c39 /c3/c37 /c60/c3/c47 /c36 /c54 /c55 /c3/c39 /c44 /c42 /c44/c55 /c3/c50 /c41 /c3/c38 /c36 /c47 /c40 /c49 /c39 /c36 /c53 /c3/c60/c40 /c36 /c53 /c58 /c3 /c32 /c3 /c11 /c21/c26/c16 /c24/c21/c12 /c3 /c44 /c41/c3 /c51 /c53/c40/c38/c40 /c39/c40/c39/c3 /c37 /c60/c3 /c36/c3 /c47 /c40/c55/c55/c40/c53 /c60 /c27/c21/c19/c19/c27 /c22/c21/c19/c19/c22 /c20/c21/c19/c19/c20 /c60/c40/c36/c53 /c21/c19/c19/c21 /c21 /c24/c21/c19/c19/c24 /c21/c19/c19/c23 /c23 /c21/c19/c19/c26 /c21/c19/c19/c25 /c26 /c25 /c21/c19/c20/c19 /c19 /c21/c19/c19/c28 /c28 /c60/c40/c36/c53 /c60 /c38/c19/c22 /c58/c50/c53/c46 /c58/c40 /c40 /c46 /c19/c20 /c19/c21 /c36 /c58 /c37 /c19/c23 /c39 /c21/c23 /c21/c25 /c21/c24 /c59 /c61 /c60 /c58/c50/c53/c46 /c58/c40 /c40 /c46 /c58/c43/c3 /c32 /c3 /c44 /c53 /c47/c48 /c47 /c24/c21/c19/c22 /c42 /c3 /c32 /c3 /c44 /c53 /c47/c48 /c47 /c21/c24/c19/c21 /c46 /c43 /c42 /c41 /c40 /c39 /c38 /c37 /c21/c19/c19/c25 /c21/c19/c19/c22 /c21/c19/c19/c21 /c21/c19/c19/c24 /c21/c19/c19/c23 /c21/c19/c19/c27 /c21/c19/c19/c26 /c21/c19/c20/c19 /c21/c19/c19/c28 /c45 /c21/c28 /c21/c27 /c22/c19 /c38 /c37 /c39 /c24/c19 /c59/c44 /c3 /c3 /c32 /c3 /c44 /c53/c47/c48 /c47/c19/c19/c22/c19 /c45/c3 /c32 /c3 /c44 /c53 /c47/c48 /c47 /c21/c19/c22/c19 /c47/c3 /c32 /c3 /c44 /c53/c47/c48 /c47/c19/c19/c25/c19 /c48 /c3 /c32 /c3 /c44 /c53/c47/c48 /c47/c19/c19/c23/c19 /c46/c3 /c32 /c3 /c44 /c53/c47/c48 /c47/c19/c20/c19/c19 /c49/c3 /c32 /c3 /c44 /c53 /c47/c48 /c47 /c21/c19/c25/c19 /c51/c3 /c32 /c3 /c44 /c53/c47/c48 /c47/c28/c22/c19/c20 /c53/c3 /c32 /c3 /c44 /c53/c47/c48 /c47/c28/c22/c19/c22 /c38/c88/c3 /c58 /c44 /c53/c40 /c43/c36/c47/c50/c42/c40 /c49/c3 /c41/c53/c40 /c40 /c51/c36/c53/c55/c3 /c49/c56/c48/c37 /c40/c53

/G73/G82/G76/G77/G76/G57/G51/G48/G49/G84/G82/G80/G98/G70 www.irf.com 9 /G77/G105/G99/G114/G111/G51™ /G84 /G97/G112/G101/G32/G38/G32/G82/G101/G101/G108/G32/G73/G110/G102/G111/G114/G109/G97/G116/G105/G111/G110 /G68/G105/G109/G101/G110/G115/G105/G111/G110/G115/G32/G97/G114/G101/G32/G115/G104/G111/G119/G110/G32/G105/G110/G32/G109/G105/G108/G108/G105/G109/G101/G116/G101/G114/G115/G32/G40/G105/G110/G99/G104/G101/G115/G41 2.05 ( .080 ) 1.95 ( .077 ) TR FEED DIRECTION 4.1 ( .161 ) 3.9 ( .154 ) 1.6 ( .062 ) 1.5 ( .060 ) 1.85 ( .072 ) 1.65 ( .065 ) 3.55 ( .139 ) 3.45 ( .136 ) 1.1 ( .043 ) 0.9 ( .036 ) 4.1 ( .161 ) 0.25 ( .010 ) 8.3 ( .326 ) 7.9 ( .312 ) 1.32 ( .051 ) 1.12 ( .045 ) 9.90 ( .390 ) 8.40 ( .331 ) 178.00 ( 7.008 ) MAX. NOTES: 1. CONTROLLING DIMENSION : MILLIMETER. 2. OUTLINE CONFORMS TO EIA-481 & EIA-541. /G78/G111/G116/G101/G58/G32/G70/G111/G114/G32/G116/G104/G101/G32/G109/G111/G115/G116/G32/G99/G117/G114/G114/G101/G110/G116/G32/G100/G114/G97/G119/G105/G110/G103/G32/G112/G108/G101/G97/G115/G101/G32/G114/G101/G102/G101/G114/G32/G116/G111/G32/G73/G82/G32/G119/G101/G98/G115/G105/G116/G101/G32/G97/G116/G58/G32/G104/G116/G116/G112/G58/G47/G47/G119/G119/G119/G46/G105/G114/G102/G46/G99/G111/G109/G47/G112/G97/G99/G107/G97/G103/G101/G47

/G73/G82/G76/G77/G76/G57/G51/G48/G49/G84/G82/G80/G98/G70 10 www.irf.com Data and specifications subject to change without notice. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information .05/2010 /G134/G32 Qualification standards can be found at International Rectifier’s web site http://www.irf.com/product-info/reliability /G134/G134/G32 Higher qualification ratings may be available should the user have such requirements. Please contact your International Rectifier sales representative for further information: http://www.irf.com/whoto-call/salesrep/ /G134/G134/G134/G32 Applicable version of JEDEC standard at the time of product release. /G78/G111/G116/G101/G115/G58 /G129/G32Repetitive rating; pulse width limited by max. junction temperature. /G130 /G32Pulse width ≤ 400µs; duty cycle ≤ 2%. /G131 /G32Surface mounted on 1 in square Cu board /G132 Refer to application note #AN-994. MS L 1 (per IPC/ JE DEC J-S T D-020D ††† RoHS compliant Yes Micro3 Qualification information† Moisture Sensitivity Level Qualification level Cons umer (p er JEDEC JESD47F ††† g uid elines ) Note Form Quantit y IRLML9301TRPbF Micro3 Ta pe and Reel 3000 Orderable part number Package Type Standard Pack