A75 MA-COM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- HIGH GAIN: 21.0 dB (TYP.)
- LOW NOISE: 2.1 dB (TYP.)
- MEDIUM OUTPUT LEVEL: +9 dBm (TYP.)
- WIDE POWER SUPPLY RANGE: +5 TO +20 VOLTS
Description
The A75 RF amplifier is a discrete hybrid design, which uses thin film manufacturing processes for accurate performance and high reliability. This single stage bipolar transistor feedback amplifier design displays impressive performance over a broadband frequency range. Both TO-8 and Surface Mount packages are hermetically sealed, and MIL-STD-883 environmental screen- ing is available. Product Image
Ordering Information
CA75** SMA Connectorized Absolute Maximum Ratings Parameter Absolute Maximum Storage Temperature -62ºC to +125ºC Case Temperature 125ºC DC Voltage +21 V Continuous Input Power +13 dBm Short Term Input power (1 minute max.) 50 mW Peak Power (3 µsec max.) 0.5 W “S” Series Burn-In Temperature (case) 125ºC Thermal Data: VCC = +15 VDC Parameter Rating Thermal Resistance θjc 170ºC/W Transistor Power Dissipation Pd 0.194 W Junction Temperature Rise Above Case Tjc 33ºC * Over temperature performance limits for part number CA75, guaranteed from 0oC to +50oC only. **The connectorized version is not RoHs compliant.
Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Cascadable Amplifier 5 to 500 MHz Rev. V3 A75 / SMA75 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Outline Drawing: TO-8 * ∗ Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified. Typical Performance Curves at +25°C Outline Drawing: Surface Mount * Outline Drawing: SMA Connectorized * WEIGHT: 1 gram (0.04 oz.) max WEIGHT: 1 gram (0.04 oz.) max WEIGHT: 19 grams (0.67 oz.) max