A6H-4101 OMRON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Ultra-low Profile, Half-pitch, Surface-mounting DIP Switch ■ Very low profile of 1.55 mm. ■ Mounting space reduced by 63% (compared with conventional models). ■ Washable, seal tape models available. ■ Embossed taping models available. (SQ reel (small reel) also available)

Ordering Information

Note: Embossed taping models are packaged in units of 500 or 4,000. Orders must be made in multiples of either 500 or 4,000. Switches are not sold individually. Specifications ■ Ratings/Characteristics RoHS Compliant (Refer to page 8 for details.) Type Standard models Models with seal tape Stick models Embossed taping Small reel (units of 500) (See note.) Stick models Embossed taping Standard reel (units of 4,000) (See note.) Small reel (units of 500) (See note.) No. of poles Quantity per stick 4 75 A6H-4101 A6H-4101-PM A6H-4102 A6H-4102-P A6H-4102-PM 6 54 A6H-6101 A6H-6101-PM A6H-6102 A6H-6102-P A6H-6102-PM 8 40 A6H-8101 A6H-8101-PM A6H-8102 A6H-8102-P A6H-8102-PM 10 33 A6H-0101 A6H-0101-PM A6H-0102 A6H-0102-P A6H-0102-PM Switching capacity 25 mA at 24 VDC µA (minimum current) at 3.5 VDC Ambient temperature Operating: –20 to 70 °C (with no icing or condensation) Storage: –40 to 80 °C (with no icing or condensation) Ambient humidity Operating: 35% to 90% Insulation resistance 100 MΩ min. (at 250 VDC) Contact resistance 200 mΩ max. (initial value) Dielectric strength 300 VAC for 1 min between terminals of the same polarity, and between terminals of different polarity Vibration resistance Malfunction: 10 to 55 Hz, 1.5-mm double amplitude Shock resistance Malfunction: 300 m/s 2 min. Life expectancy Mechanical: 1,000 operations min. Electrical: 1,000 operations min. Operating force 0.29 to 4.9 N {30 to 500 gf} Enclosure rating Equivalent to IP40 Weight 0.09 g (4 poles) 0.12 g (6 poles) 0.15 g (8 poles) 0.18 g (10 poles)

Note: 1. All units are in millimeters unless otherwise indicated. 2. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Installation ■ Internal Connections (Top View) Precautions Be sure to refer to General Precautions on pages 5 to 7 for details on proper use. No. of poles Model Dimension A A6H-4101 A6H-6101 A6H-8101 A6H-0101 A6H-4102 A6H-6102 A6H-8102 A6H-0102 6.31 8.85 11.39 13.93 Standard A6H-@101 With Seal Tape A6H-@102 A6H-@102-P Standard With seal tape Seal tape (t=0.05) Dimensions of PCB pad (Top View) P = No. of poles 10921 ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. A117-E1-02