B-499_V01 BRADY | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
499 THERMAL TRANSFER / DOT MATRIX PRINTABLE NYLON CLOTH LABEL
TDS No. B -499 Effective Date: 03/25/2019 Description: GENERAL Print Technology: Thermal transfer Material Type: Polyamide coated nylon cloth Finish: Matte white Adhesive: Permanent acrylic
APPLICATIONS
Wiremarking and general labeling applications 499 is not recommended for outdoor use. RECOMMENDED RIBBONS Thermal Transfer Ribbons Brady Series R4300 Brady Series R4900 Brady Series R6000 Halogen Free Brady Series R6200 Brady Series R4500 colored (red, blue and green) Dot Matrix Ribbons Brady Series R5000 REGULATORY/AGENCY APPROVALS UL: 499 is a UL Recognized Component to UL969 Labelling and Marking Standard when printed with Brady Series R4300, R4900, R6000 Halogen Free thermal transfer ribbons and Brady Series R5000 dot matrix ribbon. See UL file MH17154 for specific details. UL information can be accessed online at UL.com. Search in Certifications area. CSA: 499 is CSA Accepted to C22.2 No.0.15-
95 Adhesive Labels Standard when printed with Brady Series R4300 thermal
transfer ribbon. See CSA file 041833 for specific details. CSA information can be accessed online at directories.csa- international.org. For information on the Weee-RoHS compliance status for a Brady Product go to one of the following websites: In Canada: www.bradycanada.ca/weee-rohs In Europe: www.bradyeurope.com/rohs In Japan: www. b rady.co.jp/products/labelsuse/rohs All other regions: www.bradyid.com/weee-rohs SPECIAL FEATURES DIN VDE 0472 Part 815: Brady B- 499 meets requirements of a halogen- free material per DIN VDE 0472 part 815. (Statement based on review of product construction and confirmation halogen content test run at an independent test laboratory) Details: PHYSICAL PROPERTIES TEST METHODS AVERAGE RESULTS Thickness ASTM D 1000 -Substrate -Adhesive -Total (excluding liner) 0.0045 inch (0.115 mm) 0.0020 inch (0.051 mm) 0.0065 inch (0.166 mm) Adhesion to: ASTM D 1000 Stainless Steel 20 minute dwell 45 oz/inch (50 N/100 mm) 24 hour dwell 80 oz/inch (88 N/100 mm) Textured ABS 20 minute dwell 35 oz/inch (39 N/100 mm) 24 hour dwell 40 oz/inch (44 N/100 mm) Polypropylene 20 minute dwell 24 oz/inch (26 N/100 mm) 24 hour dwell 24 oz/inch (26 N/100 mm)
Polyken™ Probe Tack (1 second dwell, 1cm/sec separation) 29 oz (900 grams) Drop Shear PSTC- 7 (except use 1/2" x 1" sample) 9 hours Tensile Strength and Elongation ASTM D 1000 Machine 80 lb/in (1400 N/100 mm), 50% Performance properties tested on B- 499 printed with the Brady Series R4300, R4900, R6000 Halogen Free and R6200 thermal transfer ribbons and the Brady Series R5000 dot matrix ribbon. Printed samples of B- 499 were laminated to aluminum and allowed to dwell 24 hours before exposure to the indicated environmental conditions. Unless noted, results are the same for all ribbons tested. PERFORMANCE PROPERTIES TEST METHOD TYPICAL RESULTS Short Term High Service Temperature 5 minutes at 293°F (145°C) No visible effect to label at 145°C, slight shrinkage at 180°C but label still functional Long Term High Service Temperature 30 days at 193°F (90°C) No visible effect to label at 90°C, slight discoloration at 110°C but label still functional, at 120°C label is severely discolored Low Service Temperature 30 days at - 40°F (- 40°C) No visible effect Weatherability* ASTM G155, Cycle 1 30 days in Xenon Arc Weatherometer Material wrinkled and embrittled Humidity Resistance 30 days at 100°F, 95% R.H. No visible effect UV Light Resistance 30 days in UV Sunlighter™ 100 No visible effect Abrasion Resistance Taber Abraser, CS- 10 grinding wheels, 500 g/arm (Fed. Std. 191A, Method 5306) Print still legible at: 150 cycles with R4300, R4900, R6000 Halogen Free, R6200, and R5000 ribbons *B- 499 is not recommended for long- term outdoor use. PERFORMANCE PROPERTY CHEMICAL RESISTANCE Samples printed with the Brady Series R5000 ribbon. Samples wrapped around a 12 AWG, TFE jacketed wire and allowed to dwell 24 hours prior to test. Test was conducted at room temperature except where noted. Testing consisted of 5 cycles of 10 minute immersions in the specified test fluid followed by a 30 minute recovery period. After final immersion, samples rubbed 10 times with cotton swab saturated with test fluid. CHEMICAL REAGENT SUBJECTIVE OBSERVATION OF VISUAL CHANGE EFFECT TO LABEL STOCK R5000 DOT MATRIX RIBBON Methyl Ethyl Ketone Complete unwrap No visible effect 1,1,1 -Trichloroethane Complete unwrap No visible effect Isopropyl Alcohol Complete unwrap No visible effect Mineral Spirits Complete unwrap No visible effect SAE 20 WT Oil at 70°C No unwrap, label stained tan No visible effect Mil 5606 Oil Slight unwrap, label stained red No visible effect Gasoline Adhesive failure, label discoloration No visible effect Rust Veto® 342 Moderate unwrap, label discoloration No visible effect Deionized Water No visible effect No visible effect 3% Alconox® Detergent No visible effect No visible effect w/o rub, moderate print removal after rub 10% Sodium Hydroxide Solution Complete unwrap No visible effect 10% Sulfuric Acid Solution No visible effect No visible effect Northwoods™ Buzz Saw Degreaser Complete unwrap No visible effect w/o rub, slight print removal after rub Speedi Kut Cutting Oil 332 No unwrap, label stained red No visible effect 5% Salt Solution No visible effect No visible effect Samples printed with the Brady Series R4300, R4900, R6000 Halogen Free and R6200 thermal transfer ribbons. Samples laminated to aluminum panels and allowed to dwell 24 hours prior to test. Test performed at room temperature except where noted. Testing consisted of 5 cycles of 10 minute immersions in the specified test fluid followed by a 30 minute recovery period.
After final immersion, samples rubbed 10 times with cotton swab saturated with test fluid. CHEMICAL REAGENT SUBJECTIVE OBSERVATION OF VISUAL CHANGE R4300 THERMAL TRANSFER RIBBON R4900 THERMAL TRANSFER RIBBON R6000 Halogen Free THERMAL TRANSFER RIBBON R6200 THERMAL TRANSFER RIBBON Methyl Ethyl Ketone No visible effect w/o rub, slight print removal after rub No visible effect w/o rub, slight print removal after rub No visible effect w/o rub, moderate print smear after rub No visible effect w/o rub, slight print smear after rub 1,1,1 Trichloroethane No visible effect No visible effect Obsolete No visible effect Isopropyl Alcohol No visible effect w/o rub, moderate print removal after rub No visible effect w/o rub, complete print removal after rub No visible effect w/o rub, slight print removal after rub No visible effect w/o rub, moderate print removal after rub Mineral Spirits No visible effect w/o rub, slight print removal after rub No visible effect No visible effect No visible effect SAE 20 WT Oil at 70°C No visible effect w/o rub, severe print removal after rub No visible effect No visible effect No visible effect Mil 5606 Oil No visible effect w/o rub, slight print removal after rub No visible effect No visible effect No visible effect Gasoline No visible effect No visible effect No visible effect No visible effect w/o rub, slight print smear after rub Rust Veto® 342 No visible effect w/o rub, severe print removal after rub No visible effect w/o rub, moderate print removal after rub No visible effect No visible effect Deionized Water No visible effect w/o rub, moderate print smear after rub No visible effect w/o rub, severe print removal after rub No visible effect No visible effect w/o rub, slight print removal after rub 3% Alconox® Detergent No visible effect w/o rub, slight print removal after rub No visible effect w/o rub, severe print removal after rub No visible effect w/o rub, slight print removal after rub No visible effect w/o rub, slight print removal after rub 10% Sodium Hydroxide Solution No visible effect No visible effect No visible effect w/o rub, slight print smear after rub No visible effect 10% Sulfuric Acid Solution No visible effect w/o rub, moderate smear after rub No visible effect w/o rub, moderate print removal after rub No visible effect w/o rub, slight print removal after rub No visible effect w/o rub, slight print removal after rub Northwoods™ Buzz Saw Degreaser No visible effect w/o rub, moderate print removal after rub No visible effect w/o rub, print illegible after rub No visible effect w/o rub, moderate print removal after rub No visible effect w/o rub, slight print removal after rub Speedi Kut Cutting Oil 332 No visible effect No visible effect No visible effect No visible effect 5% Salt Solution No visible effect No visible effect No visible effect No visible effect w/o rub, slight print removal after rub Shelf Life: Shelf life is two years from the date of receipt for this product as long as this product is stored in its original packaging in an environment below 80° F (27° C) and 60% RH. It remains the responsibility of the user to assess the risk of using this product. We encourage customers to develop testing protocols that will qualify a product's fitness for use in their actual applications. Trademarks: Alconox® is a registered trademark of Alconox Co. I.D. Pro® is a registered trademark of Brady Worldwide, Inc. Northwoods™ is a trademark of the Superior Chemical Corporation. Polyken™ is a trademark of Testing Machines Inc. Rust Veto® is a registered trademark of the E.F. Houghton Co. Sunlighter™ is a trademark of the Test Lab Apparatus Company ASTM: American Society for Testing and Materials (U.S.A.) SAE: Society of Automotive Engineers (U.S.A.) UL: Underwriters Laboratories Inc. (U.S.A.)
Note: All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information. Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, express or implied, and assumes no liability in connection with the use of this information. WARRANTY Brady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to Brady's satisfaction to have been defective at the time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyers. This warranty is in lieu of any other warranty, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and of any other obligations or liability on Brady's part. Under no circumstances will Brady be liable for any loss, damage, expense, or consequential damages of any kind arising in connection with the use, or inability to use, Brady's products. Copyright 2019 Brady Worldwide, Inc. | All Rights Reserved Material may not be reproduced or distributed in any form without written permission. Brady North America | 6555 W. Good Hope Rd | Milwaukee, WI 53223 | USA | Tel: 414 -358- 6600 | Fax: 800- 292- 2289