A4752

A4752 AITSEMI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 14

Technical content

AiT Semiconductor Inc. www.ait-ic.com A4752 ANALOG SWITCH CMOS Two 4 -Channel Multiplexer and Demultiplexer REV1.0 - OCT 2021 RELEASED - - 1 - DESCRIPTION FEATURES The A4752 is digitally controlled analog switches that use silicon gate CMOS technology to achieve operating with low-power consumption of Standard CMOS integrated circuits. This A4752 is a CMOS analog IC configured as two 4-channel multiplexers, operate from 2.5 V to 5.5 V. The A4752 has low on-resistance (48Ω TYP) and very low off-leakage current (1nA TYP). The A4752 is available in SOP16, SSOP16, TSSOP16 and QFN16(3x3) packages.

ORDERING INFORMATION

SPQ: 4,000pcs/Reel M16 A4752M16R A4752M16VR SSOP16 SPQ: 4,000pcs/Reel MX16 A4752MX16R A4752MX16VR TSSOP16 SPQ: 4,000pcs/Reel TMX16 A4752TMX16R A4752TMX16VR QFN16 (3x3) SPQ: 5,000pcs/Reel Q16 A4752Q16R A4752Q16VR Note V: Halogen free Package R: Tape & Reel AiT provides all RoHS products  Low ON Resistance, 48Ω Typical at 5V Supply  -3dB Bandwidth: 180MHz  Low Cross Talk Between Switches  Single Supply Operation +2.5V to +5.5V  Break-Before-Make Switching  Binary Address Decoding on Chip  Wide Operating Temp Range: -40°C to +125°C APPLICATION  Digital Radio  Signal Gating  Factory Automation  Televisions  Appliances  Programmable Logic Circuits  Sensors  Analog and Digital Multiplexing/Demultiplexing  A/D and D/A Conversion SIMPLIFIED APPLICATION

AiT Semiconductor Inc. www.ait-ic.com A4752 ANALOG SWITCH CMOS Two 4 -Channel Multiplexer and Demultiplexer REV1.0 - OCT 2021 RELEASED - - 2 - PIN DESCRIPTION Pin# Symbol Function SOP16 SSOP16 TSSOP16 DFN16 (3x3) 1 1 1 16 Y0 Analog Switch Inputs Y0 2 2 2 15 Y2 Analog Switch Inputs Y2 3 3 3 1 Y Analog Switch “Y” Output. 4 4 4 2 Y3 Analog Switch Inputs Y3 5 5 5 3 Y1 Analog Switch Inputs Y1 6 6 6 4 ENABLE̅̅̅̅̅̅̅̅̅̅̅ Digital Enable Input. Normally connected to GND. 7 7 7 5 NC No Connect. 8 8 8 6 GND Ground. Connect to digital ground. 9 9 9 7 B Digital Address “B” Input. 10 10 10 8 A Digital Address “A” Input. 11 11 11 9 X3 Analog Switch InputsX3 12 12 12 10 X0 Analog Switch InputsX0 13 13 13 11 X Analog Switch “X” Output. 14 14 14 12 X1 Analog Switch InputsX1 15 15 15 13 X2 Analog Switch Inputs X2 16 16 16 14 VCC Positive Analog and Digital Supply Voltage Input  Expose Pad EP Exposed Pad. Connect EP to GND. SOP16, M16 Top View SSOP16, MX16 Top View SOP16, TMX16 Top View DFN16(3x3), Q16 Top View

AiT Semiconductor Inc. www.ait-ic.com A4752 ANALOG SWITCH CMOS Two 4 -Channel Multiplexer and Demultiplexer REV1.0 - OCT 2021 RELEASED - - 3 - ABSOLUTE MAXIMUM RATINGS over operating free-air temperature range, (unless otherwise noted) (1) VCC, Supply Voltage -0.3V ~ 6.0V VIN, Input Voltage (All inputs) -0.3V ~(VCC)0.3V IIN, Switch Input Current Any one input ±20mA IPEAKC Peak Switch Current Pulsed at 1ms Duration, <10% Duty Cycle ±40mA TJ, Junction Temperature 150℃ TSTG, Storage Temperature -65℃ ~ 150℃ ESD Ratings V(ESD), Electrostatic Discharge Human-body model (HBM) ±4000V Machine model (MM) ±1000V Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those specified is not implied. FUNCTION TABLE INPUT INPUT STATES ON CHANNEL(S) A B

1 X X NONE

0 0 0 X0,Y0 0 1 0 X1,Y1 0 0 1 X2,Y2 0 1 1 X3,Y3 X=Don’t care NOTE: Input and output pins are identical and interchangeable. Either may be considered an input or output; signals pass equally well in either direction RECOMMENDED OPERATING CONDITIONS Over operating free-air temperature range (unless otherwise noted) (3) Parameter Symbol Min. Max. Unit Supply Voltage VCC 2.5 5.5 V Operating temperature TA -40 +125 ℃

AiT Semiconductor Inc. www.ait-ic.com A4752 ANALOG SWITCH CMOS Two 4 -Channel Multiplexer and Demultiplexer REV1.0 - OCT 2021 RELEASED - - 4 -

ELECTRICAL CHARACTERISTICS

VCC = 5.0 V or 3.3V,Typical values are at TA = +25°C. (unless otherwise noted) Parameter Conditions V+ Temp Min Typ Max Unit ANALOG SWITCH VX _ ,VX Analog Signal Range -40~+125℃ 0 VCC V VY_ ,VY RON On Resistance VCC=5V, IX, IY=1mA 5V +25℃ - 48 65 Ω -40~+125℃ 70 Ω VCC=3.3V, IX, IY =1mA 3.3V +25℃ 100 130 Ω -40~+125℃ 140 Ω ΔRON On Resistance Match Between Channels VCC=5V, IX, IY =1mA Switch ON 5V +25℃ 1.5 5 Ω -40~+125℃ 5.3 Ω RFLAT(ON) On-Resistance Flatness VCC=5V, IX, IY =1mA Switch ON 5V +25℃ 17 25 Ω -40~+125℃ 28 Ω Ix_(OFF), IY_(OFF) Ix(OFF), IY(OFF) Ix(ON), IY(ON) X_ Off, Y_ Off, X Off, Y Off, X On, Y On Leakage Current VCC=5V, VX_, VY_=1V, 4.5V VX, VY =4.5V, 1V 5V +25℃ 1 100 nA VCC=3.3V, VX_, VY_=1V, 3V VX, VY =3V, 1V 3.3V +25℃ 1 100 nA DIGITAL CONTROL INPUTS VAH, VBH, Logic Input Logic Threshold High 5V +25℃ 1.7 V 3.3V +25℃ 1.7. V VAL, VBL, Logic Input Logic Threshold Low 5V +25℃ 0.5 V 3.3V +25℃ 0.5 V IAH, IBH, 3.3V to 5.0V +25℃ 1 100 nA IAL, IBL, 3.3V to 5.0V +25℃ 1 100 nA All unused digital inputs of the device must be held at VIO or GND to ensure proper device operation.

AiT Semiconductor Inc. www.ait-ic.com A4752 ANALOG SWITCH CMOS Two 4 -Channel Multiplexer and Demultiplexer REV1.0 - OCT 2021 RELEASED - - 5 - ELECTRICAL CHARACTERISTICS (Conti) VCC= 5.0 V or 3.3V, Typical values are at TA = +25°C (unless otherwise noted) Parameter Conditions V+ Min Typ Max Unit tTRANS Address Transition Time VX_, VY_= 3V/0V, RL = 300Ω, CL =35pF, Test Circuit 1 5V 120 ns VX_, VY_= 3V/0V, RL = 300Ω, CL =35pF, Test Circuit 1 3.3V 210 ns CL = 35pF, Test Circuit 2 ns 3.3V 130 CL = 35pF, Test Circuit 2 ns 3.3V 120 tR Internal A, B, C Rise Time ns 3.3 80 tF Internal A, B, C Fall Time 5V 60 ns 3.3 85 ns tD Break-Before-Make Time Delay VX_, VY_ = 3V, RL = 300Ω, CL = 35pF, Test Circuit 3 ns 3.3V 80 Q Charge Injection RS = 0Ω, CL = 1nF, Test Circuit 4 5V 6 pC RS = 0Ω, CL = 1nF, Test Circuit 4 3.3 4 pC XTALK Crosstalk f = 1MHz, Test Circuit 5 5V -110 dB OISO Off Isolation RL = 50Ω, f = 1MHz, Test Circuit 5 3.3 -83 dB BW -3dB Bandwidth RL = 50Ω 5V 180 MHz 3.3V 180 MHz CX_(OFF), CX_(OFF) Input Off-Capacitance f = 1MHz, Test Circuit 6 5V 4.7 pF CX(OFF) CY(OFF) Output Off-Capacitance f = 1MHz, Test Circuit 6 5V 12.7 pF CX(ON) CY(ON) Output On- Capacitance f = 1MHz, Test Circuit 6 5V 16 pF THD Total Harmonic Distortion RL = 600Ω,5VP-P, f = 20Hz to 20kHz 5V 0.7 % POWER REQUIREMENTS VCC Power Supply Range –40°C ~ +125°C 2.5 5.52 V ICC Power Supply Current VCC = 5.0V, VA, VB, VCC = 3.3V, VA, VB,

AiT Semiconductor Inc. www.ait-ic.com A4752 ANALOG SWITCH CMOS Two 4 -Channel Multiplexer and Demultiplexer REV1.0 - OCT 2021 RELEASED - - 6 - BLOCK DIAGRAM TPICAL PERFORMANCE CHARACTERISTICS Typical Ron as a Function of Input Voltage (VI ) for VI = 0 to V+

AiT Semiconductor Inc. www.ait-ic.com A4752 ANALOG SWITCH CMOS Two 4 -Channel Multiplexer and Demultiplexer REV1.0 - OCT 2021 RELEASED - - 7 - PARAMETER MEASUREMENT INFORMATION Test Circuit 1. Address Transition Times (tTRANS) Test Circuit 2. Switching Times (tON, tOFF) Test Circuit 3. Break-Before-Make Time Delay (tD) Testa Circuit 4. Charge Injection (Q)

AiT Semiconductor Inc. www.ait-ic.com A4752 ANALOG SWITCH CMOS Two 4 -Channel Multiplexer and Demultiplexer REV1.0 - OCT 2021 RELEASED - - 8 - Test Circuit 5. Off Isolation, On Loss Test Circuit 6. Capacitance

keys for a press and can do little else during this process. Figure 1. The A4752 Being Used to Help Read Button Presses on a Keypad.

AiT Semiconductor Inc. www.ait-ic.com A4752 ANALOG SWITCH CMOS Two 4 -Channel Multiplexer and Demultiplexer REV1.0 - OCT 2021 RELEASED - - 10 -

PACKAGE INFORMATION

Dimension in SOP-16 (Unit: mm) Symbol Millimeters Min Max A 1.350 1.750 A1 0.100 0.250 A2 1.350 1.550 b 0.330 0.510 c 0.170 0.250 D 9.800 10.200 E 3.800 4.000 E1 5.800 6.200 e 1.27(BSC) L 0.400 1.270 θ 0 8

AiT Semiconductor Inc. www.ait-ic.com A4752 ANALOG SWITCH CMOS Two 4 -Channel Multiplexer and Demultiplexer REV1.0 - OCT 2021 RELEASED - - 11 - Dimension in SSOP-16 (Unit: mm) Symbol Millimeters Min Max A 1.350 1.750 A1 0.100 0.250 A2 1.350 1.550 b 0.200 0.300 c 0.170 0.250 D 4.700 5.100 E 3.800 4.000 E1 5.800 6.200 e 0.635 (BSC) L 0.400 1.270 θ 0 8

AiT Semiconductor Inc. www.ait-ic.com A4752 ANALOG SWITCH CMOS Two 4 -Channel Multiplexer and Demultiplexer REV1.0 - OCT 2021 RELEASED - - 12 - Dimension in TSSOP-16 (Unit: mm) Symbol Millimeters Min Max A 1.200 A1 0.050 0.150 A2 0.800 1.050 b 0.190 0.300 c 0.090 0.200 D 4.860 5.100 E 4.300 4.500 E1 6.200 6.600 e 0.650 (BSC) L 0.500 0.700 θ 1 7

AiT Semiconductor Inc. www.ait-ic.com A4752 ANALOG SWITCH CMOS Two 4 -Channel Multiplexer and Demultiplexer REV1.0 - OCT 2021 RELEASED - - 13 - Dimension in QFN16 (3X3)(Unit: mm) Symbol Millimeters Min Max A 0.700 0.800 A1 0.000 0.050 A2 0.203 b 0.180 0.300 D 2.900 3.100 D1 1.600 1.800 E 2.900 3.100 E1 1.600 1.800 e 0.500TYP L 0.300 0.500

AiT Semiconductor Inc. www.ait-ic.com A4752 ANALOG SWITCH CMOS Two 4 -Channel Multiplexer and Demultiplexer REV1.0 - OCT 2021 RELEASED - - 14 - IMPORTANT NOTICE AiT Semiconductor Inc. (AiT) reserves the right to make changes to any its product, specifications, to discontinue any integrated circuit product or service without notice, and advises its customers to obtain the latest version of relevant information to verify, before placing orders, that the information being relied on is current. AiT Semiconductor Inc. 's integrated circuit products are not designed, intended, authorized, or warranted to be suitable for use in life support applications, devices or systems or other critical ap plications. Use of AiT products in such applications is understood to be fully at the risk of the customer. As used herein may involve potential risks of death, personal injury, or servere property, or environmental damage. In order to minimize risks associated with the customer's applications, the customer should provide adequate design and operating safeguards. AiT Semiconductor Inc. assumes to no liability to customer product design or application support. AiT warrants the performance of its products of the specifications applicable at the time of sale.