A4711

A4711 AITSEMI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 10

Technical content

AiT Semiconductor Inc. www.ait-ic.com A4711 SINGLE SPDT ANALOG SWITCH 2.7Ω, LOW -VOL TAGE REV1.1 - FEB 2010 RELEASED, JUN 2014 UPDATAED - - 1 - DESCRIPTION FEATURES The A4711 is a Single Wide -Bandwidth, fast single-pole double-throw (SPDT) CMOS switch featuring an On-Resistance of 2.7 ohm at V CC=5.0V and wide power supply range from 1.8V to 5.5V. It can be used as an analog switch or as a low -delay bus switch. The 300MHz high bandwidth performance supports the high frequency application. Break-before-make function for both parts eliminates signal disruption during switching from preventing both switches being enabled simultaneously. The A4711 is available in SC70-6 package.

ORDERING INFORMATION

Note R: Tape & Reel V:Halogen free Package AiT provides all RoHS products Suffix “V” means Halogen free Package  Wide Power Supply Range: 1.8V to 5.5V  High Bandwidth: 300MHz  High Off-Isolation: 84dB at 1MHz 51dB at 10MHz  On-Resistance: 2.7Ω(TYP) at 5.0V  Fast Switching Time TON = 12.0ns; TOFF = 5.0ns  TTL/CMOS Compatible  Break-Before-Make Switching  Rail-to-Rail Signal Range  Operation Temperature Range:-40℃ to 85℃  Available in SC70-6 Package APPLICATION  Wireless Handsets  MP3 Players  Portable Electronic Devices  Relay Replacement  PDAs  Audio & Video Signal Routing  PCMCIA Cards  Computer Peripherals  Modems

AiT Semiconductor Inc. www.ait-ic.com A4711 SINGLE SPDT ANALOG SWITCH 2.7Ω, LOW -VOL TAGE REV1.1 - FEB 2010 RELEASED, JUN 2014 UPDATAED - - 2 - PIN DESCRIPTION Top View Pin # Pin Name Function

1 A1 Data Port

2 GND Ground

3 A2 Data Port

4 B Data Port

5 VCC Power Supply

6 ENB Logic Control Signal

1 A1 Connected to B

0 A2 Connected to B

AiT Semiconductor Inc. www.ait-ic.com A4711 SINGLE SPDT ANALOG SWITCH 2.7Ω, LOW -VOL TAGE REV1.1 - FEB 2010 RELEASED, JUN 2014 UPDATAED - - 3 - ABSOLUTE MAXIMUM RATINGS VCC, DC Supply Voltage -0.3V ~ 6.0V VA1/ VA2/ VB, DC Switch Voltage -0.3V ~ VSUP + 0.3 (V) VENB, DC Input Voltage NOT2 -0.3V ~ VSUP + 0.3 (V) I(A1/A2/B), Continuous Current ±200mA IPEAK(A1/A2/B), Peak CurrentNOTE1 ±300mA TA, Operating Temperature Range -40℃~ +85℃ Stress beyond above listed “Absolute Maximum Ratings” may lead permanent damage to the device. These are stress ratings only and operations of the device at these or any other conditions beyond those indicated in the operational sections of the specifications are not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. NOTE1: Pulsed at 1ms, 50% duty circle NOTE2: Control input (VENB) must be held HIGH or LOW, and mustn’t be floated. RECOMMENDED OPERATING CONDITIONS DC Supply Voltage (VCC) 1.8V to 5.5V Switch Input Voltage (VS) 0V to VCC Control Input Voltage (VENB) 0V to VCC Operation Temperature (TA) -40℃ to +85℃

AiT Semiconductor Inc. www.ait-ic.com A4711 SINGLE SPDT ANALOG SWITCH 2.7Ω, LOW -VOL TAGE REV1.1 - FEB 2010 RELEASED, JUN 2014 UPDATAED - - 4 - ELECTRICAL CHARACTERISTICSNOTE3 DC ELECTRICAL CHARACTERISTICS @ +2.7V Supply Parameter Symbol Conditions Min. Typ.(3) Max. Unit Analog Signal Range VA1/VA2/VB 0 - VCC V A1 On-Resistance RON(A1) VCC = 2.7V; IB =-10mA ; VA1 =1.5V - 5.5 - Ω A2 On-Resistance RON(A2) VCC = 2.7V; IB =-10mA ; VA2 =1.5V - 5.5 - Ω A1 On-Resistance FlatnessNOTE4 RFLAT(A1) VCC = 2.7V; IB =-10mA ; VA1 =1.5V - 2.3 - Ω A2 On-Resistance FlatnessNOTE4 RFLAT(A2) VCC = 2.7V; IB =-10mA ; On-Resistance Match Between ChannelsNOTE5 ∆RON VCC = 2.7V; IB =-10mA ; VA2 /VA1=1.5 - 0.15 1 Ω A1 or A2 Off Leakage Current IOFF(A1) or IOFF(A2) VCC = 3.6V; VA1 or VA2 = 3V, 0.3V; VB = 0.3V, 3 V - 0.01 1 µA B On Leakage Current ION(B) VCC= 3.6V; VA1 or VA2 = 3.3V, 0.3V; VB = 0.3V, 3.3 V or floating - 0.01 1 µA Input Voltage High VIH Minimum High Level Input Voltage 1 - - V Input Voltage Low VIL Maximum Low Level Input Voltage - - 0.5 V Input Leakage Current IENB VENB = 0 or VCC - 0.01 1 µA DYNAMIC CHARACTERISTICS @ +2.7V Supply Parameter Symbol Conditions Min. Typ.(3) Max. Unit AC ELECTRICAL CHARACTERISTICS Turn-On Time TON VCC = 2.7V; VA1 or VA2 = 1.5V, RL =300Ω; CL = 35pF, VIH=1.5V,VIL=0V - 17.0 - ns Turn-Off Time TOFF VCC = 2.7V; VA1 or VA2 = 1.5V, RL =300Ω; CL = 35pF, VIH=1.5V,VIL=0V - 9.0 - ns Break-Before-Make Time TBBM VCC = 2.7V; VA1 or VA2 = 1.5V, RL = 300Ω; CL = 35pF - 15.0 - ns NC OFF Capacitance COFF(A1) f = 1MHz - 5.5 - pF NO OFF Capacitance COFF(A2) f = 1MHz - 5.5 - pF NC ON Capacitance CON(A1) f = 1MHz - 15.5 - pF NO ON Capacitance CON(A2) f = 1MHz - 15.5 - pF ADDITIONAL APPLICATION CHARACTERISTICS 3dB Bandwidth f3dB Signal = 0dBm, RL = 50Ω, CL = 5pF - 300 - MHz Off IsolationNOTE6 VISO RL = 50Ω, CL = 5pF, Signal = 0dBm f = 1MHz - -84 - dB f =10MHz - -51 - dB Power Supply Range VCC 1.8 - 5.5 V

AiT Semiconductor Inc. www.ait-ic.com A4711 SINGLE SPDT ANALOG SWITCH 2.7Ω, LOW -VOL TAGE REV1.1 - FEB 2010 RELEASED, JUN 2014 UPDATAED - - 5 - DC ELECTRICAL CHARACTERISTICS @ +5.0V Supply Parameter Symbol Conditions Min Typ.(3) Max Unit Analog Signal Range VA1/VA2/VB 0 VCC V A1 On-Resistance RON(A1) VCC = 5.0V; IB =-10mA ; VA1=3.5V - 2.7 - Ω A2 On-Resistance RON(A2) VCC = 5.0V; IB =-10mA ; A1 On-Resistance FlatnessNOTE4 RFLAT(A1) VCC = 5.0V; IB =-10mA ; VA1=3.5V - 0.8 - Ω A2 On-Resistance FlatnessNOTE4 RFLAT(A2) VCC = 5.0V; IB =-10mA ; On-Resistance Match Between ChannelsNOTE5 ∆RON VCC = 5.0V; IB =-10mA ; A1 or A2 Off Leakage Current IOFF(A1) or IOFF(A2) VCC = 5.5V; VNO or VNC = 4.5V, 1.0V;VCOM = 1.0V, 4.5 V - 0.01 1 µA B On Leakage Current ION(B) VCC = 5.5V; VA1 or VA2 = 4.5V, 1.0V;VB = 1.0V, 4.5 V or floating - 0.01 1 µA Input Voltage High VIH Minimum High Level Input Voltage 1 - - V Input Voltage Low VIL Maximum Low Level Input Voltage - - 0.5 V Input Leakage Current IENB VENB = 0 or VCC - 0.01 1 µA DAYNAMIC CHARACTERISTICS @ +5.0V Supply Parameter Symbol Conditions Min Typ.(3) Max Unit Turn-On Time TON VCC = 5.0V; VA1 or VA2 = 3.0V, RL =300Ω; CL = 35pF, VIH=1.5V,VIL=0V - 12.0 - ns Turn-Off Time TOFF VCC = 5.0V; VA1 or VA2 = 3.5V, RL =300Ω; CL = 35pF, VIH=1.5V,VIL=0V - 5.0 - ns Break-Before-Make Time TBBM VCC = 5.0V; VA1 or VA2 = 3.5V, RL = 300Ω; CL = 35pF - 8.5 - ns NC OFF Capacitance COFF(A1) f = 1MHz - 5.5 - pF NO OFF Capacitance COFF(A2) f = 1MHz - 5.5 - pF NC ON Capacitance CON(A1) f = 1MHz - 15.5 - pF NO ON Capacitance CON(A2) f = 1MHz - 15.5 - pF 3dB Bandwidth f3dB Signal = 0dBm, RL = 50Ω, CL = 5pF - 300 - MHz Off IsolationNOTE6 VISO RL = 50Ω, CL = 5pF, Signal = 0dBm f = 1MHz - -84 - dB f =10MHz - -51 - dB Power Supply Range VCC 1.8 - 5.5 V NOTE3: Typical characteristics are at +3V supply and +25℃ NOTE4: Flatness is defined as the difference between the maximum and minimum value of on resistance as measured over the specified analog signal ranges. NOTE5: △RON= RON(MAX) - RON(MIN), between A1 and A2 . NOTE6: Off Channel Isolation = 20log10 [(VA1\\A2)/VB]

AiT Semiconductor Inc. www.ait-ic.com A4711 SINGLE SPDT ANALOG SWITCH 2.7Ω, LOW -VOL TAGE REV1.1 - FEB 2010 RELEASED, JUN 2014 UPDATAED - - 6 - TEST CIRCUIT 1. Test Circuit for On Resister 2. Test Circuit for Bandwidth 3. Test Circuit for Off Isolation

AiT Semiconductor Inc. www.ait-ic.com A4711 SINGLE SPDT ANALOG SWITCH 2.7Ω, LOW -VOL TAGE REV1.1 - FEB 2010 RELEASED, JUN 2014 UPDATAED - - 7 - 4. Test Circuit for Switch Times 5. Test Circuit for Break-Before-Make Time Delay, tD

AiT Semiconductor Inc. www.ait-ic.com A4711 SINGLE SPDT ANALOG SWITCH 2.7Ω, LOW -VOL TAGE REV1.1 - FEB 2010 RELEASED, JUN 2014 UPDATAED - - 8 - BLOCK DIAGRAM

AiT Semiconductor Inc. www.ait-ic.com A4711 SINGLE SPDT ANALOG SWITCH 2.7Ω, LOW -VOL TAGE REV1.1 - FEB 2010 RELEASED, JUN 2014 UPDATAED - - 9 -

PACKAGE INFORMATION

Dimension in SC70-6 Package (Unit: mm) Symbol Min Max A 0.900 1.100 A1 0.000 0.100 A2 0.900 1.000 b 0.150 0.350 c 0.080 0.150 D 2.000 2.200 E 1.150 1.350 E1 2.150 2.450 e 0.065 TYP e1 1.200 1.400 L 0.525 REF L1 0.260 0.460 θ 0° 8°

AiT Semiconductor Inc. www.ait-ic.com A4711 SINGLE SPDT ANALOG SWITCH 2.7Ω, LOW -VOL TAGE REV1.1 - FEB 2010 RELEASED, JUN 2014 UPDATAED - - 10 - IMPORTANT NOTICE AiT Semiconductor Inc. (AiT) reserves the right to make changes to any its product, specifications, to discontinue any integrated circuit product or service without notice, a nd advises its customers to obtain the latest version of relevant information to verify, before placing orders, that the information being relied on is current. AiT Semiconductor Inc. 's integrated circuit products are not designed, intended, authorized, o r warranted to be suitable for use in life support applications, devices or systems or other critical applications. Use of AiT products in such applications is understood to be fully at the risk of the customer. As used herein may involve potential risks o f death, personal injury, or servere property, or environmental damage. In order to minimize risks associated with the customer's applications, the customer should provide adequate design and operating safeguards. AiT Semiconductor Inc . assumes to no liab ility to customer product design or application support. AiT warrants the performance of its products of the specifications applicable at the time of sale.