1600622 TURCK | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Features
■Threaded barrel, M12 x 1 ■Stainless steel, 1.4301 ■DC 3- wire, 10…30 VDC ■Programmable (NC/NO) with teach adapter VB2‐SP1 ■M12 x 1 connector Wiring diagram Functional principle The weld sensors are available in different versions, with different signal intensities and diameters. Ferromagnetic parts which differ strongly in their material properties and diameters can thus be detected. A component to be detected must be located within the so- called optimal sensitive area in order to be detected. This optimal sensitive area has a width of 0.5 mm and is laser-engraved on the tip of the probe, 11. 9 mm above of the M12 thread.
TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 2|3 NIMFE-EM12/4.0L61-UN6X-H1141/S1182 | 11/07/2023 15-31 | technical changes reserved Technical data Max. tightening torque of housing nut 10 Nm Electrical connection Connector, M12 × 1 Environmental conditions Ambient temperature -25…+70 °C Vibration resistance 55 Hz (1 mm) Shock resistance 30 g (11 ms) Protection class IP67 MTTF 874 years acc. to SN 29500 (Ed. 99) 40 Power-on indication LED, Green Switching state LED, Yellow Mounting instructions Mounting instructions/Description The magnetic field sensor for detection of ferromagnetic spares is especially suited for the detection of welding nuts as well as spacer or reinforcing sleeves. The parts to be detected must always consist of ferromagnetic material, so that a proper function can be guaranteed. Most applications need center bolts to tack the welding nuts and reinforcing sleeves in place and thus provide mechanical protection of the sensors. Theses bolts must be made of non-ferromagnetic material, like stainless steel for example. Center bolts are not available at Turck, as these have to be individually produced for and adjusted to the correspondent application.
TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 3|3 NIMFE-EM12/4.0L61-UN6X-H1141/S1182 | 11/07/2023 15-31 | technical changes reserved Accessories VB2-SP1 A3501-29 Teach adapter BST-12B 6947212 Mounting clamp for threaded barrel sensors, with dead-stop; material: PA6 MW-12 6945003 Mounting bracket for threaded barrel sensors; material: Stainless steel A2 1.4301 (AISI 304) BSS-12 6901321 Mounting clamp for smooth and threaded barrel sensors; material: Polypropylene