A2F12M12W2-F1 STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: STMICROELECTRONICS
  • PDF pages: 15

Technical content

Datasheet sections

  • 1 Electrical rating
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 NTC
  • 4 Package
  • 5 Electrical topology and pin description
  • 6 Package information
  • 6.1 ACEPACK 2 fourpack press fit package information

Features

  • Fourpack topology
  • ACEPACK 2 power module – 13 mΩ of typical R DS(on) each switch – Insulation voltage UL certified of 2.5 kVrms – Integrated NTC temperature sensor – DBC Cu-Al 2O3-Cu based – Press fit contact pins

Applications

  • DC/DC converter

Description

This ACEPACK 2 power module in fourpack topology integrates advanced silicon carbide Power MOSFET technology from STMicroelectronics. The module leverages the innovative properties of the wide-bandgap SiC material and a high-thermal- performance substrate. The result is exceptionally low on-resistance per unit area and excellent switching performance that is virtually independent of temperature. An NTC sensor completes the design. Product status link A2F12M12W2-F1 Product summary Order code A2F12M12W2-F1 Marking A2F12M12W2-F1 Package ACEPACK 2 Leads type Press fit Packing Tray ACEPACK 2 power module, fourpack topology, 1200 V, 13 mΩ typ. SiC Power MOSFET gen.2 with NTC A2F12M12W2-F1 Datasheet DS13840 - Rev 3 - February 2022 For further information contact your local STMicroelectronics sales office.

1 Electrical rating

TJ = 25 °C unless otherwise specified. Table 1. Absolute maximum ratings

  1. Pulse width limited by maximum junction temperature.

Table 2. Thermal data

2 Electrical characteristics

Table 3. On/off-state Table 4. Switching energy Table 5. Source-drain diode

Electrical characteristics

2.1 Electrical characteristics (curves)

Figure 1. Typical output characteristics (TJ = -40°C) Figure 2. Typical output characteristics (TJ = 25°C) Figure 3. Typical output characteristics (TJ = 150 °C) Figure 4. Typical transfer characteristics Figure 5. Typical diode foward charcteristics (terminal) Figure 6. Typical gate charge characteristics

3 NTC

Table 6. Absolute maximum ratings for NTC temperature sensor, considered as stand-alone Figure 15. NTC typical resistance vs temperature Figure 16. NTC resistance vs temperature, zoom

4 Package

Table 7. ACEPACK 2 package

5 Electrical topology and pin description

Figure 17. Electrical topology and pin description Figure 18. Package top view with pinout

6 Package information

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark.

6.1 ACEPACK 2 fourpack press fit package information

Figure 19. ACEPACK 2 fourpack press fit package outline (dimensions are in mm)

Package information

DS13840 - Rev 3 page 10/15

Table 8. ACEPACK 2 fourpack press fit mechanical data

Figure 20. ACEPACK 2 fourpack press fit recommended PCB holes layout (dimensions are in mm)

Revision history

Table 9. Document revision history 18-Oct-2021 1 First release. characteristics and Table 5. Source drain diode. Updated Table 7. ACEPACK 2 package. Added Section 4 Electrical characteristics (curves). Updated title, features and description in cover page. Section 5 Electrical topology and pin description. Added Section 2 Electrical characteristics.