A2530E24A-LPZ ANAREN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

Applications

  • The terms ZigBee®, ZigBee® Alliance, and ZigBee® Standard are registered trademarks of ZigBee®

Anaren, Inc. / 6635 Kirkville Road / East Syracuse, NY 13057 General:  2.4-GHz IEEE 802.15.4 compliant RF transceiver  Excellent receiver sensitivity and robustness to interference (-95dBm average)  Wide input voltage range (2.2V – 3.6V)  100% RF tested in production  Module weight approximately 0.7 grams Current Consumption: (TC = 25°C, VDD = 3.0V)  Active mode RX (CPU Idle): 28 mA  Active mode TX (CPU Idle): 68 mA @1dBm, 78mA @8dBm (limit for ETSI compliance), 130mA @ 15dBm (limit for FCC/IC compliance)  3 Low power/sleep modes from 1uA to 200 uA Microcontroller:  High-performance and low-power 8051 Microcontroller core with code prefetch  256KB in-system programmable flash and 8KB RAM with retention in all power modes AIR-ZNP Firmware:  Preloaded with Anaren’s AIR-ZNP firmware, based on the TI Z-Stack™ for the ZigBee® Standard  Supports SPI and UART communication  Driver library included for MSP430™ and Stellaris® MCUs, which abstracts functionality  Over 30 code examples for a paired MCU included to demonstrate functionality, including: Button Blink: Blinks LED when button pressed Hello World: Outputs ‘Hello World’ to the PC via USB Get Module Version: Displays module version Get MAC Address: Displays internal MAC address Write NV Items: Writes to user-accessible non-volatile memory Read NV Items: Reads user-accessible non-volatile memory Read Radio GPIO: Displays value of module GPIO 1-4 Write Radio GPIO: Writes values to module GPIO 1-4 Coordinator Function: AF/ZDO, Simple API, or Secure Router Function: AF/ZDO, Simple API, or Secure End Point Function: AF/ZDO RF Tester: RF test utility Range Test: Test utility to show link quality (LQI) Packet Error Test: Test utility to show packet error rate (PER) AND MANY MORE! BoosterPack features shown below; see User’s Manual for more information. A AIR Radio Module B Control switches C “LaunchPad” Switches & LED’s D Sensors (IR temperature, RGB light) E EEPROM F Tri-color LED G Current sensor (module or full-board) H MCU (pre-mounted & flashed) I I2C and SPI external connection J AIR Module LEDs (2) Product overview Layout Information This product is not to be used in any implantable medical device or external medical device intended to regulate or monitor biological functions, including but not limited to devices such as pacemakers, defibrillators, cardiac resynchronization devices, pressure sensors, biochemical stimulators and neurostimulators. ANAREN MAKES NO WARRANTY OF FITNESS OR MERCHANTABILITY OF THIS PRODUCT FOR ANY USE OF THIS TYPE. Anaren shall not be responsible for any consequential damages arising from the sale or use of this product for any use of this type. The ultimate user of the product assumes all risk of personal injury or death arising from a prohibited use. To view the entire family of AIR modules & development tools, please visit our website at: http://www.anaren.com/air PLEASE NOTE: Additional information on the Texas Instruments CC2530, CC2591, MSP430 & Stellaris LaunchPads, and Z-Stack firm- ware for the Zigbee Standard can be found at http://www.ti.com A (Anaren)

1 Chip series (CC1101, CC110L, CC2500, CC2530)

2 Function (R = radio only, E=Range Extender)

3 Frequency band (x100MHz)

4 Form factor (A = Internal Antenna)

5 Module Type (EM1 = Eval Module, EZ4x = EZ-430

Module, LPx = BoosterPack) Nomenclature 1239a IMPORTANT: The A2530E24A-LPZ BoosterPack is a tool to aid in the development and testing of wireless communication applications; it is not to be used in the actual production of wireless end- products or for resale as a wireless communications network.