A2405D-2W

B0303D-2W MORNSUN | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

MORNSUN reserves the copyright Specifications subject to change without notice. A_D-2W & B_D-2W A/1-2007 Page 1 of 2 A_D-2W & B_D-2W Series 2W, FIXED INPUT, ISOLATED & UNREGULATED DUAL/SINGLE OUTPUT DC-DC CONVERTER RoHS FEATURES PRODUCT PROGRAM Input Output Voltage (VDC) Current (mA) Part Number Nominal Range Voltage (VDC) Max Min Efficiency (%, Typ) Certificate B0303D-2W 3.3 3.0-3.6 3.3 400 40 73 A0505D-2W ±5 ±200 ±20 82 UL A0509D-2W ±9 ±111 ±12 85 UL A0512D-2W ±12 ±83 ±9 86 UL A0515D-2W ±15 ±67 ±7 82 UL B0503D-2W 3.3 400 40 74 B0505D-2W 5 400 40 81 UL CE B0509D-2W 9 222 23 84 UL CE B0512D-2W 12 167 17 83 UL CE B0515D-2W 5 4.5-5.5 15 133 14 84 UL CE A1205D-2W ±5 ±200 ±20 81 UL A1209D-2W ±9 ±111 ±12 84 UL A1212D-2W ±12 ±83 ±9 86 UL A1215D-2W ±15 ±67 ±7 82 UL B1205D-2W 5 400 40 81 UL CE B1209D-2W 9 222 23 82 UL CE B1212D-2W 12 167 17 85 UL CE B1215D-2W 12 10.8-13.2 15 133 14 82 UL CE A1505D-2W 15 13.5-16.5 ±5 ±200 ±20 80 A2405D-2W ±5 ±200 ±20 80 UL A2409D-2W ±9 ±111 ±12 84 UL A2412D-2W ±12 ±83 ±9 84 UL A2415D-2W ±15 ±67 ±7 84 UL A2424D-2W ±24 ±42 ±5 85 B2405D-2W 5 400 40 80 UL CE B2409D-2W 9 222 23 83 UL CE B2412D-2W 12 167 17 84 UL CE B2415D-2W 15 133 14 84 UL CE B2424D-2W 24 21.6-26.4 24 84 10 84 Note: The A_S_1W/B_LS_1W series also are available in our company. COMMON SPECIFICATIONS Item Test conditions Min Typ Max Units Operating Temp. Range -40 85 Storage Temp. Range -55 125 °C Storage humidity range 95 % Cooling Free air convection Temp. rise at full load 15 25 Lead temperature 1.5mm from case for 10 seconds 300 °C Isolation voltage Tested for 1 minute and 1 mA max 1000 VDC Isolation resistance Test at 500VDC 1000 M Ω Short circuit protection* 1 s Case material Plastic (UL94-V0) MTBF 3500 K hours High Efficiency up to 86% 1KVDC Isolation Internal SMD Construction Temperature Range: -40°C to +85°C No Heat sink Required Internal SMD construction Industry Standard Pinout RoHS Compliance

APPLICATIONS

The A_D-2W & B_D- 2W Series are specially designed for applications where a group of polar power supplies are isolated from the input power supply in a distributed power supply system on a circuit board. These products apply to: 1) Where the voltage of the input power supply is fixed (voltage variation ≤ ±10%); 2) Where isolation is necessary between input and output (isolation voltage ≤1000VDC); 3) Where the r egulation of the output voltage and the output ripple noise are not demanding. Such as: purely digital circuits, ordinary low frequency analog circuits, and IGBT power device driving circuits. MODEL SELECTION A0505D-2W Product Series Input Voltage Output Voltage Package Style Rated Power MORNSUN Science& Technology co.,Ltd. Address: 2th floor 6th building, Hangzhou Industrial District, Guangzhou, China Tel: 86-20-38601850 Fax: 86-20-38601272 http://www.mornsun-power.com *Supply voltage must be discontinued at the end of short circuit duration.

MORNSUN reserves the copyright Specifications subject to change without notice. A_D-2W & B_D-2W A/1-2007 Page 2 of 2 OUTPUT SPECIFICATIONS Item Test conditions Min Typ Max Units Output power 0.2 2 W Line regulation For Vin change of 1% ±1.2 % (5V output) 12.8 15 (9V output) 8.3 15 (12V output) 6.8 15 Load regulation 10% to 100% load (15V output) 6.3 15 Output voltage accuracy See tolerance envelope graph Temperature drift 100% full load 0.03 %/ °C Ripple & Noise* 20MHz Bandwidth 100 150 mVp-p Switching frequency Full load, nominal input 75 KHz *Test ripple and noise by “parallel cable” method. See detailed operation instructions at Testing of Power Converter section, application notes. Note: 1. All specifications measured at T A=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified. 2. Dual output models unbalanced load: ±0.5%. TYPICAL CHARACTERISTICS Ambient TemperatureC ( OUTLINE DIMENSIONS & PIN CONNECTIONS Dual Output Single Output Pin SinglesDuals FOOTPRINT DETAILS RECOMMENDED FOOTPRINT Top view,grid:2.54mm(0.1inch), diameter:1.00mm(0.039inch) Note: Unit:mm(inch) Pin section:0.50*0.30mm(0.020*0.012inch) Pin tolerances:0.10mm(0.004inch) General tolerances:0.25mm(0.010inch) First Angle Projection Vin GND -Vo +Vo (0.323) 1 7 891114 1 7 891114 (0.394) (0.300) 1 7 8914 NC Vin GND No pin +Vo NC APPLICATION NOTE Requirement on output load To ensure this module can operate efficiently and reliably, During operation, the minimum output load is not less than 10% of the full load, and that this product should never be operated under no load! If the actual output power is ve ry small, please connect a resistor with proper resistance at the output end in parallel to increase the load, or use our company ’s products with a lower rated output power (A_D -1W/B_D-1Wseries). Overload Protection Under normal operating conditions, the output circuit of these products has no protection against overload. The simplest method is to connect a self-recovery fuse in series at the input end or add a circuit breaker to the circuit. Recommended testing and application circuit If you want to further decrease the input/output ripple, an “LC” filtering network may be connected to the input and output ends of the DC/DC converter, see (Figure 1). Vin GND +Vo 0VDCCin L L DC L Cout Cout -Vo Dual Output L Single Output Vin GND +Vo DCCin L DC Cout (Figure 1) It should also be noted that the inductance and the frequency of the “LC” filtering network should be staggered with the DC/DC frequency to avoid mutual interference. However, the capacitance of the output filter capacitor must be proper. If the capacitance is too big, a startup problem might arise. For ever y channel of output, provided the safe and reliable operation is ensured, the greatest capacitance of its filter capacitor sees (Table 1). EXTERNAL CAPACITOR TABLE (TABLE 1) Vin (VDC) Cin (uF) Single Vout (VDC) Cout (uF) Dual Vout (VDC) Cout (uF) 5 4.7 3.3 10 ±5 4.7 12 2.2 5 10 ±9 2.2 15 2.2 9 4.7 ±12 1 24 1 12 2.2 ±15 0.47 - - 15 1 ±24 0.47 It’s not recommended to connect any external capacitor in the application field with less than 0.5 watt output. Output Voltage Regulation and Over- voltage Protection Circuit The simplest device for output voltage regulation, over-voltage and over- current protection is a linear voltage regulator with overheat protection that is connected to the input or output end in series (Figure 2). Vin GND +Vout DCDC -Vout REG REG REG Dual Output Single Output Vin GND +Vout DC DC REG REG (Figure 2) No parallel connection or plug and play.