A2111 ETC1 | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Confidential and Proprietary Ample Communications
4034 Clipper Court • Fremont, CA 94538
Phone: 510-657-1500 • Email: info@amplecomm.com 7/8/02 A2111 Preliminary Product Brief Skyhawk
10 Gigabit Ethernet LAN/WAN PHY
The Skyhawk is a highly integrated, ultra-low-power frame processing solution for 10 Gigabit Ethernet (10 GbE) physical layer applications. The device provides complete PCS-R, PCS-W, and WIS functionality and can operate as a 10 GbE LAN or WAN PHY . In 10 GbE WAN PHY mode, the line-side supports a standard 16-bit, 622.08 MHz XSBI / SFI-4 interface. In
10 GbE LAN PHY mode, the line-side supports a
standard 16-bit, 644.53 MHz XSBI interface. The system-side interface is a selectable standard HSTL XGMII or SSTL-2 XGMII interface. PCS layer functions include 64b/66b encoding and decoding, X 58 scrambling and descrambing, gear box- ing, and rate matching. Block-lock detection and remote and local fault handling are also supported. WIS functions include WIS framing, pointer process- ing, and X 7 scrambling and descrambling, as well as error rate monitoring and alarm processing per ANSI T1-416 – 1999. For device control and configuration, the Skyhawk pro- vides a standard 32-bit processor interface, as well as a Management Data I/O (MDIO) interface and MDIO registers. The device conforms to the IEEE serial LAN-PHY and WAN-PHY proposals. A key application for the device is to facilitate cost-effective interfacing between standard 10 Gbps optical modules with XSBI interfaces and link layer devices with XGMII interfaces. Other applications include optical core routers, enterprise switches, and Ethernet line terminating equipment. Block Diagram RX Optical I/F TX
10 GbE
XGMII (HSTL) XGMII (SSTL-2) TX XGMII I/F XGMII (HSTL) XGMII (SSTL) RX XGMII I/F XSBI / SFI-4 CPU System Loopback PCS Loopback WIS Loopback Optical Loopback
Confidential and Proprietary Ample Communications Phone: 510-657-1500 • Email: info@amplecomm.com 7/8/02
Features
- Support for all WIS framing and frame synchronization functions Complete section, line, and path overhead layer termination Generation and verification of BIP-8 parity Pointer processing for receive payload extraction and transmit payload mapping Extraction and insertion of transport and path overhead from/to dedicated external pins or from registers WIS alarm insertion and detection Frame-synchronous X 7 + X6 + 1 scrambling and descrambling Error rate monitoring
10 GbE Processing
10 GbE WAN and LAN PHY functionality Complete PCS-R and PCS-W functionality including: 64b/66b encoding and decoding X58 + X39 + 1 scrambling and descrambling 66:16 gearboxing Block synchronization Rate matching Block_lock detection Remote and local fault handling Line-Side Interface Support for two configurations Standard XSBI (SFI-4) 16-bit, 622.08 MHz, LVDS interface for 10 GbE WAN PHY mode Standard XSBI 16-bit, 644.53 MHz, LVDS interface for 10 GbE LAN PHY mode System-Side Interfaces Selectable XGMII interface: HSTL2 or SSTL CPU Interface 32-bit synchronous CPU interface; support for both Intel and Motorola-type processors MDIO and MDC management interface and registers Test and Diagnostic Support Built-in pattern generators and verifiers Multiple diagnostic loopbacks IEEE 1149.1 port with memory BIST, scan, and JTAG boundary scan General Specifications Packaging: 672-pin flip-chip BGA Technology: low-power CMOS 1.8V , 3.3V-tolerant I/Os on CPU and other interfaces Ambient operating temperature: 0°C to 70°C Power dissipation: 3.5 W max, 2.7 W typical Standards Compliance IEEE 802.3ae-D3.1 draft specification ANSI T1.416 – 1999
Applications
10 GbE LAN or WAN switching equipment 10 GbE WAN or LAN PHYs Ethernet line-terminating equipment (ELTE) Edge and core routers Multiservice switches Uplink cards 10 GbE test equipment