A20110200A9

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

For additional product information, visit www.eaton.com/connectors Terminal Blocks: Single RowEuroMag SeriesEdge Connectors, One-Sided Boards Compliance References C 0.70 (17.8) 0.60 (15.2) 0.02 (0.5) 0.375 (9.53) Mount End Barrier End Mount End Barrier End B Pole Centers A Mount Centers 0.19 (4.8) Ø 0.32 (8.1) C A Mount Centers 0.65 (16.5) B Pole Centers 0.375 (9.53) Mount End Barrier End Mount End Barrier End 0.40 (10.2) 0.76 (19.3) 0.565 (14.35) on LP2000 0.15 (3.8) Ø 0.02 (0.5) MOUNTING BARRIER & BARRIER ENDS MOUNTING ENDS ONLY ENDS ONLY A C B C Poles Mount Ctrs. Length Pole Ctrs. Length 02 1.13 1.56 0.38 0.81 03 1.50 1.93 0.75 1.18 04 1.88 2.30 1.13 1.56 05 2.25 2.68 1.50 1.93 06 2.63 3.06 1.88 2.31 07 3.00 3.43 2.25 2.68 08 3.38 3.81 2.63 3.06 09 3.75 4.18 3.00 3.43 10 4.13 4.56 3.38 3.81 11 4.50 4.93 3.75 4.18 12 4.88 5.31 4.13 4.56 13 5.25 5.69 4.50 4.93 14 5.63 6.06 4.88 5.31 15 6.00 6.43 5.25 5.68 16 6.38 6.81 5.63 6.06 17 6.75 7.18 6.00 6.43 18 7.13 7.56 6.38 6.81 19 7.50 7.93 6.75 7.18 20 7.88 8.31 7.13 7.56 21 8.25 8.68 7.50 7.93 22 8.63 9.06 7.88 8.31 23 9.00 9.43 8.25 8.68 24 9.38 9.81 8.63 9.06 25 9.75 10.18 9.00 9.43 26 10.13 10.56 9.38 9.81 27 10.50 10.93 9.75 10.18 28 10.88 11.31 10.13 10.55 29 11.25 11.68 10.50 10.93 30 11.63 12.05 10.88 11.31 31 – – 11.25 11.68 32 – – 11.63 12.05 LP2: 30A, 150V* CB2: 30A, 300V* Center Spacing: 0.375” or 3/8” (9.52mm) Wire Range: #12-22 AWG Cu Screw Size: #6-32 zinc-plated philslot Torque Rating: 9 lb-in. Base: Standoffs standard for easy flux washing Distance Between Barriers: 0.32” (8.1mm) Recommended PCB Hole Diameter: 0.076” (1.93mm) Operating Temperature: 105°C (221°F) max., -40°C (-40°F) min. Molded Material: Black, UL Rated 94V0 Thermoplastic Breakdown Voltage: 3400V (A2 & LP2); 4100V (CB2). Agency Information: UL File E62622, CSA File 47235; IEC Compliance; CE Certified *30A Rating achieved with a #10 copper wire crimped to a ring terminal.; 20A Rating without ring terminal. LP202110 A2000 & LP2000 Series Dimensions - in (mm) * Dimensions in inches. To convert to millimeters, multiply by 25.4. A20110807WR CB2000 Series CB20210507 Terminal Blocks - Single Row Series A2000, LP2000 & CB2000 Single Row Terminal Blocks SPECIFICATIONS Rating: A2: 30A, 300V*

For additional product information, visit www.eaton.com/connectors Terminal Blocks: Single RowEuroMag SeriesEdge Connectors, One-Sided Boards Compliance References Terminal Blocks - Single Row Series A2000 & LP2000 Single Row Terminal Blocks Part Numbering System Series Terminal Style Base/End Poles Screw Options nnnn nnnnnn qq q qq qqqq A2 - standard barrier 01* - handwired 1 - std. base/mnt. end 02 to 32 Blank- std. screw LP2 - low profile 02 - printed circuit 2 - std. base/barrier end 02 to 30on mount 00 - screws shipped bulk barrier 03 - non feed-thru 3 - insulator base/mnt. end end base 03* - stainless steel 04 - wire wrap tail 4 - insulator base/ 04 - brass nickel-plated 06 - handwired barrier end 07 - steel SEMS 07 - extended pin 5 - closed base/ (not available 08 - printed circuit mount end with hardware options) 09 - 0.250˝ QC short 6 - closed base/ 09* - brass SEMS 10 - 0.187˝ QC molded mount end nickel-plated 14 - printed circuit (not available with 19 - 0.250˝ QC long hardware options) Options qqq AB* - angle mnt. options (pg 11) A1 to A9 - 0.250˝ QC B1 to B9 - 0.187˝ QC DR* - drilled right angle (pg 11) L1 to L6 marking options (pg 25) MP* mounting plates (pg 11) RC* - retaining clips (pg 11) R30 to R77 - right angle bends (pg 11) S1* - solder lug/flat O J2* & OJ4* - over barrier jumpersCA** - captive screw (not available w/covers)WR - wire ready (not available on LP2 Covers - (pg 26) series) 0.20 (5.1) 0.062 (1.57) 0.031 (0.79) 0.55 (14.0) 0.062 (1.57) 0.031 (0.79) Handwired Wire Wrap Tail Non Feed-Thru Printed Circuit 0.54 (13.7) 0.055 (1.40) 0.032 (0.81)0.14 (3.6) Extended Pin 0.11 (2.79) 0.031 (0.79) 0.30 (7.6) Handwired Terminal Styles Inches (Millimeters) 0.062 (1.57) 0.17 (4.3) 0.031 (0.79) 0.42 (10.7) 0.187 (4.75) 0.031 (0.79) 0.40 (10.2) 0.250 (6.35) 0.031 (0.79) Printed Circuit 0.187˝ QC 0.250˝ QC short 0.72 (18.3) 0.31 (7.9) 0.30 (7.62) 0.33 (8.4) 0.250 (6.35) 0.031 (0.79) 0.250˝ QC long 0.062 (1.57) 0.031 (0.79) 0.125 (3.2) Printed Circuit A 2 L P 2 Base/End Note: 6 style not available with covers. 5 & 6 Styles only available with 03 terminals. 0.55 (14.0) 0.110 (2.79) 0.031 (0.79) *A2 only. Not compatible with 03-stainless steel screws. *Contact factory for configuration.

For additional product information, visit www.eaton.com/connectors Terminal Blocks: Single RowEuroMag Series Edge Connectors, One-Sided Boards Compliance References Hardware Options (Bulk ordering part numbers are in parentheses) Inches (Millimeters) Solder Lugs Jumpers Quick Connects Blade Width A = 0.250” Blade Width B = 0.187” 0.68 (17.3) 0.84 (21.2) (2S1-J) A1 & B1 (2A1-J & 2B1-J) A2 & B2 (2A2-J & 2B2-J) A3 & B3 (2A3-J & 2B3-J) A9 & B9 (2A9-J & 2B9-J) 0.33 (8.4) †JB (JB2-02-J) A4 & B4 (2A4-J & 2B4-J) A5 & B5 (2A5-J & 2B5-J) A6 & B6 (2A6-J & 2B6-J) A7 & B7 (2A7-J & 2B7-J) A8 & B8 (2A8-J & 2B8-J) 0.33 (8.4) †JA (JA2-02-J) 0.33 (8.4) †JC (JC2-02-J) WR Wire Ready Brass Nickel-Plated (F506-J) Steel SEMS (F523-J) Screw Options (Bulk ordering part numbers are in parentheses) Brass SEMS Nickel-Plated (F524-J) †OJ4 (OJ4-J) †OJ2 (OJ2-J) B SECTION A–A 0.40 (10.2) B 0.180 (4.57) 0.218 (5.54) B 0.150 Ø (3.8) mounting holes (2) 0.095 (2.4) SECTION B–B 0.40 (10.2) B Molded Mount End 1, 3 & 5 Mount End Stainless Steel (F507-J) Standard Zinc-plated Steel (F505-J) Base/End Options Inches (Millimeters) Series A2000 & LP2000 Single Row Terminal Blocks Continued †Contact factory for configuration. Terminal Blocks - Single Row Mount End Details 1 - Standard base/mount end 5 - Closed base/mount end 6 - Closed base/molded mount end 2 - Standard base/barrier end 4 - Insulator base/barrier end FIG 1 FIG 2 FIG 3 FIG 4 FIG 5 FIG 1 FIG 2 FIG 3 FIG 4 3 - Insulator base/mount end FIG 1 FIG 2 FIG 3 FIG 4 FIG 5 FIG 1 FIG 2 FIG 3 FIG 4 FIG 5 FIG 6 FIG 1 FIG 2 FIG 3 FIG 4 FIG 5 FIG 6 FIG 1 FIG 2 FIG 3 FIG 4 FIG 5 FIG 6 0.30 (7.62) 0.30 (7.62)

For additional product information, visit www.eaton.com/connectors Terminal Blocks: Single RowEuroMag SeriesEdge Connectors, One-Sided Boards Compliance References MOUNTING PLATE MP MT

0.144 HOLE

w/0.312 C' BORE 0.325 0.12 Option MP Metal inserts with 0.150” dia. hole accept #6 screw. Bulk part number 2MP-J . Option DR Counterbored holes across mount ends of block enable fastening with two screws at right angles to normal mount position. Drilled Right Angle (A2, LP2 only) Mounting Plates Retaining Clip RETAINING CLIP Option RC Use on standoff tubes. Fit panels up to 0.125” thick. Two clips for every five positions. Supplied unassembled. Bulk part number H541-J . Mounting Options 0.32 0.45 0.15 0.25 0.04 Option AB Angle brackets enable block to be fastened at right angles to normal mount position. Bulk part number 2AB-J. Angle Brackets (A2, LP2 only) Right Angle Bends (A2, LP2 only) Right angle terminals are offered on the A2000 & LP2000 Series. Configurations are defined in these dimensions: X = pin extension beyond the block base; Z = length from block base to centerline of the terminal tip. Standard bends consist of the X and Z dimensions shown in the chart. Specify by adding the selected Bend Option Code to the terminal part number. X Z 0.82 X Z 0.55

07 Terminal Bend Configurations

04 Terminal Bend Configurations

Code (minimum) base R30 0.04 0.28 No R35 0.01 0.23 No R36 0.02 0.22 No R39 0.05 0.19 No R42 0.08 0.16 No R46 0.12 0.12 No R48 0.14 0.10 No R50 0.16 0.08 No Bend Available Option X Z w/insulator Code (minimum) base R30 0.04 0.55 Yes R35 0.01 0.50 Yes R36 0.02 0.49 Yes R42 0.08 0.43 Yes R46 0.12 0.39 Yes R50 0.16 0.35 No R53 0.19 0.32 No R66 0.32 0.19 No R69 0.35 0.16 No R75 0.41 0.10 No R77 0.43 0.08 No Dimensions in inches. To convert to millimeters, multiply by 25.4. Series A2000 & LP2000 Single Row Terminal Blocks Continued Terminal Blocks - Single Row

For additional product information, visit www.eaton.com/connectors Terminal Blocks: Single RowEuroMag Series Edge Connectors, One-Sided Boards Compliance References 0.19 (4.8 ) 0.045 (1.14) 0.031 (0.79)0.18 (4.6) Printed Circuit Series Terminal Style Base/End Poles Screws nnnnnn nnnn q qq qqqq CB2 - closed back 01 - handwired 1 - mount end 02to 32 07 - steel SEMS 02 - printed circuit 2 - barrier end 02to 30 on mount standard 07 - extended pin end base 09 - brass SEMS 14 - printed circuit nickel-plated CA - captive screw 07CA - SEMS captive Options qqq AB - angle mounting brackets (pg 13) A7 to A9 - 0.250” QC B7 to B9 - 0.187” QC EB - exit back terminals EF - exit front terminals L1 to L6 marking options (pg 25) LT1 to LT6 marking options (pg 25) MP mtg. plates (pg 13) S1 - solder lug/flat OJ2* & OJ4*** - over barrier jumpers Covers - (pg 26) 0.40 (10.2) 0.120 (3.05) 0.031 (0.79) 0.18 (4.6) Steel SEMS zinc-plated (B001-7084-J) 0.125 (3.18) 0.045 (1.14) 0.031 (0.79)0.18 (4.6) Printed Circuit 0.70 (17.8) 0.062 (1.57) 0.031 (0.79) 0.18 (4.6) Extended Pin Screw Options (Bulk ordering part numbers are in parentheses) Terminal Styles Inches (Millimeters) Series CB2000 Single Row Terminal Blocks Part Numbering System Handwired Exit Rear(std.) EF Exit Front EB Exit Back CB2 Terminal Exit Options Inches (Millimeters) 0.18 (4.6) 0.255 (6.48) 0.18 (4.6) X CB 2 Brass SEMS nickel-plated (F524-J) * NOTE: Wire ready screws standard on all terminal styles. Only available on 3-poles and up. *Contact factory for configuration.. Terminal Blocks - Single Row

For additional product information, visit www.eaton.com/connectors Terminal Blocks: Single RowEuroMag SeriesEdge Connectors, One-Sided Boards Compliance References Terminal Blocks - Single Row MOUNTING PLATE MP MT MT8 Hardware Options (Bulk ordering part numbers are in parentheses) Inches (Millimeters) Solder Lugs Jumpers Quick Connects Blade Width A = 0.250”. Blade Width B = 0.187”. 0.68 (17.3) 0.84 (21.2) (2S1-J) A9 & B9 (2A9-J & 2B9-J) 0.33 (8.4) †JB (JB2-XX-J) A7 & B7 (2A7-J & 2B7-J) A8 & B8 (2A8-J & 2B8-J) 0.33 (8.4) †JA (JA2-XX-J) 0.33 (8.4) †JC (JC2-XX-J) Mounting Options Inches (Millimeters) Snap-in Angle Bracket Chassis or PCB A A #6 or #8 mounting screw & nut (Customer supplied.) 0.71 (18.0) 0.45 (11.4) 0.79 (20.1) 1.02 (25.8) 0.24 (6.1) 0.42 (10.7) Option AB †OJ4 (OJ4-J) †OJ2 (OJ2-J) Option MP MP Metal inserts with 0.150” dia. hole accept #6 screw. Bulk part number 2MP-J . Mounting Plates End Positions usable Exit Back (EB) Terminals Angle Bracket Right Angle Mounting Bracket Mounts blocks on PC boards at a right angle.

• Protects solder joints.
• Recommended for all EB (Exit Back) PCB terminal blocks.
• Bracket snaps securely on block (no hardware required).
• Minimum strip length (end positions are usable).
• Mount with #6-32 or #8-32 screws (not supplied). Series CB2000 Single Row Terminal Blocks †Contact factory for configuration..