RM3401 RECTRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
P-Channel Enhancement Mode Power MOSFET
Description
The RM3401 uses advanced trench technology to provide excellent RDS(ON), low gate charge and operation with gate voltages as low as 2.5V. This device is suitable for use as a load switch or in PWM applications. General Features VDS = -30V,ID = -4.2A RDS(ON) < 130mΩ @ VGS=-2.5V RDS(ON) < 75mΩ @ VGS=-4.5V RDS(ON) < 55mΩ @ VGS=-10V High power and current handing capability Lead free product is acquired Surface mount package Application PWM applications Load switch Power management D G S Schematic diagram Marking and pin Assignment Package Marking And Ordering Information Device Marking Device Device Package Reel Size Tape width Quantity A19T RM3401 SOT-23 Ø180mm 8 mm 3000 units Absolute Maximum Ratings (TA=25 unless otherwise noted) Parameter Symbol Limit Unit Drain-Source Voltage VDS -30 V Gate-Source Voltage VGS ±12 V Drain Current-Continuous ID -4.2 A Drain Current-Pulsed (Note 1) IDM -30 A Maximum Power Dissipation PD 1.2 W Operating Junction and Storage Temperature Range TJ,TSTG -55 To 150 Thermal Characteristic Thermal Resistance,Junction-to-Ambient (Note 2) RθJA 104 /W Electrical Characteristics (TA=25 unless otherwise noted) Parameter Symbol Condition Min Typ Max Unit Off Characteristics Drain-Source Breakdown Voltage BVDSS VGS=0V ID=-250μA -30 - V RM3401 2018-04/1 5 REV:A SOT-23 top view A19T
Zero Gate Voltage Drain Current I DSS V DS=-24V,VGS=0V - - -1 /g541A Gate-Body Leakage Current I GSS V GS=±10V,VDS=0V - - ±100 nA On Characteristics (Note 3) Gate Threshold Voltage V GS(th) V DS=VGS,ID=-250/g541A -0.7 -1 -1.3 V VGS=-10V, ID=-4.2A - 47 55 m/g525 VGS=-4.5V, ID=-4A - 56 75 m/g525 Drain-Source On-State Resistance R DS(ON) VGS=-2.5V, ID=-1A 72 130 m/g525 Forward Transconductance g FS V DS=-5V,ID=-4.2A - 10 - S Dynamic Characteristics (Note4) Input Capacitance C lss - 880 - PF Output Capacitance C oss - 105 - PF Reverse Transfer Capacitance C rss VDS=-15V,VGS=0V, F=1.0MHz - 65 - PF Switching Characteristics (Note 4) Turn-on Delay Time t d(on) - 7 - nS Turn-on Rise Time t r - 3 - nS Turn-Off Delay Time t d(off) - 30 - nS Turn-Off Fall Time t f VDD=-15V,ID=-4.2A VGS=-10V,RGEN=6/g525 - 12 - nS Total Gate Charge Q g - 8.5 - nC Gate-Source Charge Q gs - 1.8 - nC Gate-Drain Charge Q gd VDS=-15V,ID=-4.2A,VGS=-4.5V - 2.7 - nC Drain-Source Diode Characteristics Diode Forward Voltage (Note 3) V SD V GS=0V,IS=-4.2A - - -1.2 V Notes: 1. Repetitive Rating: Pulse width limited by maximum junction temperature. 2. Surface Mounted on FR4 Board, t /g148 10 sec. 3. Pulse Test: Pulse Width /g148 300/g541s, Duty Cycle /g148 2%. 4. Guaranteed by design, not subject to production
- All dimensions are in millimeters. 2. Tolerance ±0.10mm (4 mil) unless otherwise specified 3. Package body sizes exclude mold flash and gate burrs. Mold flash at the non-lead sides should be less than 5 mils. 4. Dimension L is measured in gauge plane. 5. Controlling dimension is millimeter, converted inch dimensions are not necessarily exact. Dimensions in Millimeters Symbol MIN. MAX. A 0.900 1.150 A1 0.000 0.100 A2 0.900 1.050 b 0.300 0.500 c 0.080 0.150 D 2.800 3.000 E 1.200 1.400 E1 2.250 2.550 e 0.950TYP e1 1.800 2.000 L 0.550REF L1 0.300 0.500 /g537 0° 8°
(pcs/tube) Tube (pcs/inner box) Tube (pcs/cartoon) Tape&Reel (pcs/reel) Tape&Reel (pcs/inner box) Tape&Reel (pcs/cartoon) DFN 100 10,000 100,000 2,500 5,000 40,000 SOP-8 100 10,000 100,000 4,000 4,000 20,000 TSSOP-8 100 32,000 128,000 3,000 6,000 48,000 TO-252-2L(4R) 80 4,000 40,000 2,500 2,500 25,000 TO-263-2L 50 1,000 10,000 800 800 8,000
Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi- lity for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" paramet- ers which may be included on RECTRON data sheets and/ or specifications ca- n and do vary in different applications and actual performance may vary over ti- me. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other rela- ted applications where a failure or malfunction of component or circuitry may di- rectly or indirectly cause injury or threaten a life without expressed written appr- oval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rect- ron Inc and its subsidiaries harmless against all claims, damages and expendit- ures. DISCLAIMER NOTICE