A150N50X4B ANAREN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Place Manufacturing. USA/Canada: Toll Free: Europe : (315) 432-8909 (800) 544-2414 +44 2392-232392 Model A150N 50 X4B Features:
- RoHS Compliant
- 150 Watts
- DC - 2.7 GHz
- AlN Ceramic
- Non-Nichrome Resistive Element
- Low VSWR
- 100% Tested Chip Termination
150 Watts, 50
ΩΩ ΩΩ
Description
The A150N50X4B is high performance Aluminum Nitride (AlN) chip termination intended as a cost competitive alternat ive to Beryllium Oxide (BeO). The termination is well suited to all cellul ar frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS. The high pow er handling makes the part ideal for terminating circulators, a nd for use in power combiners. The termination is also RoHS compliant! General Specifications Resistive Element Thick film Substrate AlN Ceramic Terminal Finish Matte Tin over Nickel Barrier Operating Temperature -55 to +200 °C (see de rating chart) Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches. Electrical Specifications Resistance Value: 50 Ohms, ± 2% Power: 150 Watts Frequency Range: DC – 2.7 GHz Return Loss >26dB to 2.0 GHz >20dB to 2.7 GHz Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change. Outline Drawing A150N50X4 (097) Rev E Pb
USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Available on Tape and Reel For Pick and Place Manufacturing. Model A150N 50X4 B Typical Performance: Power De-rating: Tape & Reel: Mounting Footprint and Procedure: A150N50X4 (097) Rev E A150 N50X4B A150 N50X4 B Pb