A_S-2WR3 MORNSUN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

A_S-2WR3 & B_S-2WR3 series 2021.09.23-A/4 Page 1 of 5 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation Selection Guide Certification Part No. Input Voltage (VDC) Output Full Load Efficiency (%) Min./Typ. Capacitive Load*(µF) Max. Nominal (Range) Voltage (VDC) Current (mA) Max./Min. UL/EN/IEC A1203S-2WR3 (10.8-13.2) 1200 A1205S-2WR3 ±5 ±200/±20 76/80 A1207S-2WR3 ±7.2 ±139/±13 76/80 470 A1209S-2WR3 ±9 ±111/±11 78/82 UL/EN/IEC A1212S-2WR3 ±12 ±83/±8 79/83 220 A1215S-2WR3 ±15 ±67/±7 79/83 -- A1224S-2WR3 ±24 ±42/±4 79/83 100 -- B1203S-2WR3 3.3 400/40 75/79 2400 UL/EN/IEC B1205S-2WR3 5 400/40 78/82 2400 -- B1209S-2WR3 9 222/22 78/82 1000 UL/EN/IEC B1212S-2WR3 12 167/17 80/84 560 B1215S-2WR3 15 133/13 81/85 B1224S-2WR3 24 83/8 82/86 220 A1505S-2WR3 (13.5-16.5) ±5 ±200/±20 76/80 1200 A1515S-2WR3 ±15 ±67/±7 78/82 220 B1505S-2WR3 5 400/40 76/80 2400 B1515S-2WR3 15 133/13 77/81 560 B1524S-2WR3 24 83/8 77/81 220 A2403S-2WR3 (21.6-26.4) 1200 UL/EN/IEC A2405S-2WR3 ±5 ±200/±20 74/80 A2407S-2WR3 ±7.2 ±139/±13 74/80 470 A2409S-2WR3 ±9 ±111/±11 75/81 UL/EN/IEC A2412S-2WR3 ±12 ±83/±8 77/83 220 A2415S-2WR3 ±15 ±67/±7 77/83 A2424S-2WR3 ±24 ±42/±4 77/83 100 B2403S-2WR3 3.3 400/40 70/76 2400 UL/EN/IEC B2405S-2WR3 5 400/40 74/80 2400 -- B2409S-2WR3 9 222/22 75/81 1000 2W isolated DC-DC converter Fixed input voltage, unregulated dual/ single output CB Patent Protection RoHS UL 62368-1 EN 62368-1 IEC62368-1

FEATURES

 Continuous short-circuit protection  No-load input current as low as 8mA  Operating ambient temperature range: -40℃ to +105℃  High efficiency up to 86%  High power density  I/O isolation test voltage 1.5k VDC  Industry standard pin-out A_S-2WR3 & B_S-2WR3 series are specially designed for applications where an (two) isolated voltage is required in a distributed power supply system. They are suitable for: 1. The voltage of the input power supply is relatively stable with a variation of ±10%Vin or less; 2. An input to output isolation voltage of up to 1500VDC is necessary; 3. The requirement for a tight output regulation is not as strict.

A_S-2WR3 & B_S-2WR3 series 2021.09.23-A/4 Page 2 of 5 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation UL/EN/IEC B2412S-2WR3 (21.6-26.4) 12 167/17 78/84 560 UL/EN/IEC B2415S-2WR3 15 133/13 80/86 B2424S-2WR3 24 83/8 80/86 220 Note: * The specified maximum capacitive load for positive and negative output is identical. Input Specifications Item Operating Conditions Min. Typ. Max. Unit Input Current (full load / no-load) 12V input -- 223/8 235/-- mA 15V input -- 167/8 176/-- 24V input -- 110/8 120/-- Reflected Ripple Current -- 15 -- Surge Voltage (1sec. max.) 12V input -0.7 -- 18 VDC15V input -0.7 -- 21 24V input -0.7 -- 30 Input Filter Capacitance filter Hot Plug Unavailable Output Specifications Item Operating Conditions Min. Typ. Max. Unit Voltage Accuracy See output regulation curve(Fig. 1) Linear Regulation Input voltage change: ±1% 3.3VDC output -- -- ±1.5 Others -- -- ±1.2 Load Regulation 10%-100% load 3.3VDC output -- 15 -- 5VDC output -- 7 -- 7.2VDC output -- 6 -- 9VDC output -- 5 -- 12VDC output -- 5 -- 15VDC output -- 4 -- 24VDC output -- 3 -- Ripple & Noise* 20MHz bandwidth -- 75 180 mVp-p Temperature Coefficient Full load -- ±0.02 -- %/℃ Short-circuit Protection Continuous, self-recovery Notes: * The “parallel cable” method is used for ripple and noise test, please refer to DC-DC Converter Application Notes for specific information. General Specifications Item Operating Conditions Min. Typ. Max. Unit Isolation Input-output electric strength test for 1 minute with a leakage current of 1mA max. 1500 -- -- VDC Insulation Resistance Input-output resistance at 500VDC 1000 -- -- MΩ Isolation Capacitance Input-output capacitance at 100kHz/0.1V -- 20 -- pF Operating Temperature Derating when operating temperature≥85℃, (see Fig. 2) -40 -- 105 Storage Temperature -55 -- 125 Case Temperature Rise Ta=25℃ -- 15 -- Pin Soldering Resistance Temperature Soldering spot is 1.5mm away from case for 10 seconds -- -- 300 Storage Humidity Non-condensing 5 -- 95 %RH Vibration 10-150Hz, 5G, 0.75mm. along X, Y and Z Switching Frequency Full load, nominal input voltage -- 260 -- kHz MTBF MIL-HDBK-217F @ 25℃ 3500 -- -- k hours

A_S-2WR3 & B_S-2WR3 series 2021.09.23-A/4 Page 3 of 5 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation Mechanical Specifications Case Material Black plastic; flame-retardant and heat-resistant (UL94-V0) Dimensions 19.65 x 7.05 x 10.16mm Weight 2.4g(Typ.) Cooling Method Free air convection Electromagnetic Compatibility (EMC) Emission CE CISPR32/EN55032 CLASS B RE CISPR32/EN55032 CLASS B Immunity ESD IEC/EN61000-4-2 Air ±8kV, Contact ±6kV perf. Criteria B Note: Refer to Fig.4 for recommended circuit test Typical Performance Curves Fig. 1 120 100 Output Power Percent(%) Ambient Temp.( )℃ Temperature Derating Curve Safe Operating Area -40 0 40 85 105 120 Fig. 2

A_S-2WR3 & B_S-2WR3 series 2021.09.23-A/4 Page 4 of 5 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation Design Reference 1. Typical application Input and/or output ripple can be further reduced, by connecting a filter capacitor from the input and/or output terminals to ground as shown in Fig.3. Choosing suitable filter capacitor values is very important for a smooth operation of the modules, particularly to avoid start-up problems caused by capacitor values that are too high. For recommended input and output capacitor values refer to Table 1. Vin GND +Vo 0VDCCin DC Cout Cout -Vo Dual Output Single Output Vin GND +Vo DCCin DC Cout Fig. 3 Table 1: Recommended input and output capacitor values Vin Cin Single Vout Cout Dual Vout Cout* 12VDC 2.2µF/25V 3.3VDC 10µF/16V ±3.3VDC 4.7µF/16V 15VDC 2.2µF/25V 5VDC 10µF/16V ±5VDC 4.7µF/16V 24VDC 1µF/50V 9VDC 2.2µF/25V ±7.2VDC 2.2µF/25V -- -- 12VDC 2.2µF/25V ±9VDC 2.2µF/25V -- -- 15VDC 1µF/25V ±12VDC 1µF/25V -- -- 24VDC 1µF/50V ±15VDC 1µF/25V Note: *The capacitor value of the positive and the negative output is identical. 2. EMC compliance circuit Single Output Input voltage 12/15/24VDC Emission C1/C2 4.7µF /50V CY 270pF /2kV C3 Refer to Cout in Fig.3 LDM 6.8µH Dual Output Fig. 4 Input voltage 12/15/24VDC Emission C1/C2 4.7µF /50V CY 270pF /2kV C3/C4 Refer to Cout in Fig.3 LDM 6.8µH 3. For additional information, please refer to DC-DC converter application notes on www.mornsun-power.com

A_S-2WR3 & B_S-2WR3 series 2021.09.23-A/4 Page 5 of 5 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation Dimensions and Recommended Layout Notes: 1. For additional information on Product Packaging please refer to www.mornsun-power.com. Packaging bag number: 58200001; 2. If the product is not operated within the required load range, the product performance cannot be guaranteed to comply with all parameters in the datasheet; 3. The maximum capacitive load offered were tested at input voltage range and full load; 4. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25℃, humidity<75%RH with nominal input voltage and rated output load; 5. All index testing methods in this datasheet are based on our company corporate standards; 6. We can provide product customization service, please contact our technicians directly for specific information; 7. Products are related to laws and regulations: see "Features" and "EMC"; 8. Our products shall be classified according to ISO14001 and related environmental laws and regulations, and shall be handled by qualified units. MORNSUN Guangzhou Science & Technology Co., Ltd. Tel: 86-20-38601850 Fax: 86-20-38601272 E-mail: info@mornsun.cn www.mornsun-power.com