A1206R220DCT

B0805R224KCT ETC2 | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Multilayer Ceramic Capacitors Page <1> 14/01/12 V1.1 www.element14.com www.farnell.com www.newark.com Features:

• A wide selection of sizes is available (0402 to 1812)
• High capacitance in given case size
• Capacitor with lead-free termination (pure Tin)

Description

MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. POE’s MLCC is made by NP0, X7R and Y5V dielectric material and which provides product with high electrical precision, stability and reliability.

Applications

For general digital circuit. For power supply bypass capacitors. For consumer electronics. For telecommunication. External Dimensions Dimensions : Inches (Millimetres) Size Inches (mm) L (mm) W (mm) T (mm)/Symbol Remark MB (mm) 0603 (1608) 0.4 ±0.151.6 +0.15 /- 0.1 0.8 +0.15 / -0.1 0.8 +0.15 / -0.1 X 0805 (2012) 2 ±0.15 1.25 ±0.1 0.6 ±0.1 A 0.5 ±0.20.8 ±0.1 B 1.25 ±0.1 D # 1206 (3216) 0.8 ±0.1 B 0.6 ±0.2 0.95 ±0.1 C 1.15 ±0.15 J 1.25 ±0.1 D # Reflow soldering only is recommended. Dielectric NPO X7R Y5V Size 0603, 0805, 1206 Capacitance range* 0.5 pF to 0.039 µF 100 pF to 1 µF 10 nF to 680 nF Capacitance tolerance** Cap ≤ 5 pF: B (±0.1 pF), C (±0.25 pF) 5 pF< Cap < 10 pF: C (±0.25 pF), D (±0.5 pF) (±10%) General Electrical Data

Multilayer Ceramic Capacitors Page <2> 14/01/12 V1.1 www.element14.com www.farnell.com www.newark.com Dielectric NPO X7R Y5V Rated voltage (WVDC) 16 V, 25 V, 50 V, 100 V 10 V, 16 V, 25 V, 50 V, 100 V Tan δ* Cap < 30 pF: Q ≥ 400+20C Cap ≥ 30 pF: Q ≥ 1,000 Note 1 Insulation resistance at Ur ≥ 10 Ω or R × C ≥ 500 Ω × F whichever is less Operating temperature -55°C to +125°C -25 to +85°C Capacitance characteristic ±30 ppm ±15% +30 / -80% Termination Ni / Sn (lead-free termination) General Electrical Data * Measured at the condition of 30 to 70% related humidity NP0 : Apply 1 ±0.2 Vrms, 1 MHz ±10% for Cap ≤ 1,000 pF and 1 ±0.2 V rms, 1 kHz ±10% for Cap>1,000 pF, 25°C at ambient temperature X7R : Apply 1 ±0.2 Vrms, 1 kHz ± 10%, at 25°C ambient temperature Y5V : Apply 1 ±0.2 Vrms, 1 kHz ±10%, at 20°C ambient temperature ** Preconditioning for Class II MLCC: Perform a heat treatment at 150 ±10°C for 1 hour, then leave in ambient condition for 24 ±2 hours before measurement. Note 1: ≥ 50 V ≤ 2.5% ≤ 3% 0603 ≥ 0.047 µF; 0805 ≥ 0.18 µF, 1206 ≥ 0.47 µF 25 V ≤ 3.5% ≤ 5% 0805 ≥ 1 µF; 1210 ≥ 10 µF ≤ 7% 0603 ≥ 0.33 µF 10% 0402 ≥ 0.1 µF; 0603 ≥ 0.68 µF 16 V ≤ 3.5% ≤ 5% 0402 ≥ 0.033 µF; 0603 ≥ 0.15 µF; 0805 ≥ 0.68 µF; 1206 ≥ 2.2 µF ≤ 10% 1210 ≥ 22 µF; 0603 ≥ 0.68 µF 10 V ≤ 5.0% ≤ 10% 0603 ≥ 0.33 µF; 0805 ≥ 2.2 µF X7R ≥ 50 V ≤ 5.0% 7.0% 0603 ≥ 0.1 µF; 0805 ≥ 0.47 µF 25V ≤ 5.0% ≤7% 0402 ≥ 0.047 µF; 0603 ≥ 0.1 µF; 0805 ≥ 0.33 µF; 1206 ≥ 1 µF ≤ 9% 0402 ≥ 0.068 µF; 0603 ≥ 0.47 µF 16 V (C < 1 µF) ≤ 7.0% ≤ 9% 0402 ≥ 0.068 µF; 0603 ≥ 0.68 µF 16 V (C ≥ 1 µF) ≤ 9.0% ≤ 12.5% 0805 ≥ 3.3 µF; 1206 ≥ 10 µF; 1210 ≥ 22 µF; 1812 ≥ 47µF 10 V ≤ 12.5% 0402 ≥ 0.47 µF Y5V

www.element14.com www.farnell.com www.newark.com Multilayer Ceramic Capacitors Page <3> 14/01/12 V1.1 Capacitance Range (0603) Dielectric NP0 X7R Y5V Size 0603 Rated Voltage (V dc) (V) (V) (V) (V) (V) (V) (V) (V) (V) 100 pF (101) S S S S S S - - - 220 pF (221) S S S S S S - - - 1,000 pF (102) S S S S S S - - - 0.1 µF (104) - - - S S S S S S 220 pF (221) S S S S S S - - - 470 pF (471) S S S S S S - - - 1. The letter in cell is expressed the symbol of product thickness. Capacitance Range (0805) Dielectric NP0 X7R Y5V Size 0805 Rated Voltage (V dc) (V) (V) 100 (V) (V) (V) 100 (V) (V) (V) 100 (V) 1,000 pF (102) B B B B B B - - - 2,200 pF (222) B B B B B B - - - 100 pF - - - B B B - - - 220 pF A A A B B B - - - 470 pF - - - B B B - - - 0.010 µF (103) D - - B B B A A B 0.022 µF (223) - - - B B B A A B 1. The letter in cell is expressed the symbol of product thickness.

Multilayer Ceramic Capacitors Page <4> 14/01/12 V1.1 www.element14.com www.farnell.com www.newark.com Capacitance Range (1206) Dielectric NP0 X7R Y5V Size 1206 Rated Voltage (V dc) (V) (V) (V) (V) (V) (V) 0.33 µF - - C D B B 0.47 µF - - J P B B 10 nF - - - - - - 100 nF - - - - - - 1. The letter in cell is expressed the symbol of product thickness. Recommended soldering conditions The lead-free termination MLCCs are not only to be used on SMT against lead-free solder paste, but also suitable against lead- containing solder paste. If the optimized solder joint is requested, increasing soldering time, temperature and concentration o f N2 within oven are recommended. Recommended IR reflow soldering profile for SMT process with SnAgCu series solder paste.

Multilayer Ceramic Capacitors Page <5> 14/01/12 V1.1 www.element14.com www.farnell.com www.newark.com Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group w as aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012. Recommended wave soldering profile for SMT process with SnAgCu series solder. Part Number Explanation: U Size 0603 Capacitance 220 Termination C TC Rated Voltage Dielectric Packaging J Tolerance Rated Voltage : Two significant digits followed by no. of zeros and R is in place of decimal point) A = 100 V, B = 16 V, T = 25 V and U = 50 V Size : 0603 inches (1608 mm), 0805 inches (2012 mm) and 1206 inches (3216 mm) Dielectric : C = NP0 (C0G), R = X7R and F = Y5V Capacitance : Two significant digits followed by number of zeros and R is in place of decimal point eg: 102 = 10 x 10 2 = 1,000 pF Tolerance : B = ±0.1 pF, C = ±0.25 pF, D = ±0.5 pF, F = ±1%, G = +2% and J = +5% Termination : C = Cu / Ni / Sn Packaging : T = 7 inches reeled