A1206C221JNT

B0603R104KCT MULTICOMP | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 13

Technical content

www.element14.com www.farnell.com www.newark.com Page <1> V1.008/07/13 Multilayer SMD Ceramic Capacitors General Purpose Series Description: MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. MLCC is made by NP0, X7R and Y5V dielectric material and which provides product with high electrical precision, stability and reliability. Features:

• A wide selection of sizes is available (0603, 0805, 1206).
• High capacitance in given case size.
• Capacitor with lead-free termination (pure Tin). Applications:
• For general digital circuit.
• For power supply bypass capacitors.
• For consumer electronics.
• For telecommunication. External Dimensions: The outline of MLCC Size Inch (mm) L (mm) W (mm) T (mm)/Symbol Remark MB (mm) 0603 (1608) 0.4 ±0.151.6 +0.15/-0.1 0.8 +0.15/-0.1 0.8 +0.15/-0.1 X - 0805 (2012) 2 ±0.15 1.25 ±0.1 0.6 ±0.1 A - 0.5 ±0.2 0.8 ±0.1 B - 1.25 ±0.1 D # 1206 (3216) 0.8 ±0.1 B - 0.6 ±0.2 0.95 ±0.1 C - 1.15 ±0.15 J # 1.25 ±0.1 D # 1.6 ±0.2 G # 3.2 +0.3/-0.1 1.6 +0.3/0.1 1.6 +0.3/-0.1 P # # Reflow soldering only is recommended.

www.element14.com www.farnell.com www.newark.com Page <2> V1.008/07/13 Multilayer SMD Ceramic Capacitors General Purpose Series General Electrical Data: Dielectric NP0 X7R Y5V Size 0603, 0805, 1206 Capacitance* 0.5pF to 0.1μF 100pF to 0.82μF 10nF to 0.68μF Capacitance tolerance** Cap≤5pF: B (±0.1pF), C (±0.25pF) 5pF<Cap<10pF: C (±0.25pF), D (±0.5pF) K (±10%) Rated voltage (WVDC) 10V, 16V, 25V, 50V, 100V 6.3V, 10V, 16V, 25V, 50V, 100V DF (Tan δ)* Cap<30pF: Q≥400+20C Cap≥30pF: Q≥1000 Note 1 Insulation resistance at Ur ≥ 10GΩ or R × C ≥ 500 Ω × F Whichever is less Operating temperature -55°C to +125°C -25°C to +85°C Capacitance change ±30ppm ±15% +30 / -80% Termination Ni/Sn (lead-free termination) * Measured at the condition of 30~70% related humidity. NP0: Apply 1 ±0.2Vrms, 1MHz ±10% for Cap≤1,000pF and 1 ±0.2Vrms, 1kHz ±10% for Cap>1,000pF, 25°C at ambient temperature X7R: Apply 1.0±0.2Vrms, 1.0kHz±10%, at 25°C ambient temperature. Y5V: Apply 1.0±0.2Vrms, 1.0kHz±10%, at 20°C ambient temperature. ** Preconditioning for Class II MLCC : Perform a heat treatment at 150 ±10°C for 1 hour, then leave in ambient condition for 24±2 hours before measurement. Note 1: X7R Y5V Rated 0805≥0.18µF ,1206≥0.47µF 25V ≤3.5% ≤7% 0603≥0.33µF ≤10% 0402≧0.10µF;0603≧0.47µF 16V ≤3.5% 0805≥0.68µF ≤10% 0603≥0.68µF 6.3V ≤10% --- -- 25V ≤5.0% 0805≥0.33µF ≤9% 0402≥0.068µF; 0603≧0.47µF 16V 10V ≤12.5% --- -- 6.3V ≤20% --- --

www.element14.com www.farnell.com www.newark.com Page <3> V1.008/07/13 Multilayer SMD Ceramic Capacitors General Purpose Series Constructions: No. Name NP0* NP0

1 Ceramic material BaTiO3 based

2 Inner electrode AgPd alloy Ni

4 Middle layer Ni

5 Outer layer Sn

• Partial NPO items are with Ag/Ni/Sn terminations, please ref to product range of NPO dielectric for detail. Capacitance Range (NP0 Dielectric) Dielectric NP0 Size 0603 0805 1206 Rated Voltage (VDC) 10 16 25 50 100 10 16 25 50 100 10 16 25 50 100 Capacitance 0.5pF (0R5) S S S S S A A A A A 0.6pF (0R6) S S S S S A A A A A 0.7pF (0R7) S S S S S A A A A A 0.8pF (0R8) S S S S S A A A A A 0.9pF (0R9) S S S S S A A A A A 1.0pF (1R0) S S S S S A A A A A 1.2pF (1R2) S S S S S A A A A A 1.5pF (1R5) S S S S S A A A A A B B B B B 1.8pF (1R8) S S S S S A A A A A B B B B B 2.2pF (2R2) S S S S S A A A A A B B B B B 2.7pF (2R7) S S S S S A A A A A B B B B B 3.3pF (3R3) S S S S S A A A A A B B B B B 3.9pF (3R9) S S S S S A A A A A B B B B B 4.7pF (4R7) S S S S S A A A A A B B B B B 5.6pF (5R6) S S S S S A A A A A B B B B B 6.8pF (6R8) S S S S S A A A A A B B B B B 8.2pF (8R2) S S S S S A A A A A B B B B B 10pF (100) S S S S S A A A A A B B B B B 12pF (120) S S S S S A A A A A B B B B B 15pF (150) S S S S S A A A A A B B B B B 18pF (180) S S S S S A A A A A B B B B B 22pF (220) S S S S S A A A A A B B B B B 27pF (270) S S S S S A A A A A B B B B B 33pF (330) S S S S S A A A A A B B B B B 39pF (390) S S S S S A A A A A B B B B B

www.element14.com www.farnell.com www.newark.com Page <4> V1.008/07/13 Multilayer SMD Ceramic Capacitors General Purpose Series Dielectric NP0 Size 0603 0805 1206 Rated Voltage (VDC) 10 16 25 50 100 10 16 25 50 100 10 16 25 50 100 Capacitance 47pF (470) S S S S S A A A A A B B B B B 56pF (560) S S S S S A A A A A B B B B B 68pF (680) S S S S S A A A A A B B B B B 82pF (820) S S S S S A A A A A B B B B B 100pF (101) S S S S S A A A A A B B B B B 120pF (121) S S S S S A A A A A B B B B B 150pF (151) S S S S S A A A A A B B B B B 180pF (181) S S S S S A A A A A B B B B B 220pF (221) S S S S S A A A A A B B B B B 270pF (271) S S S S S A A A A A B B B B B 330pF (331) S S S S S A A A A A B B B B B 390pF (391) S S S S S B B B B B B B B B B 470pF (471) S S S S S B B B B B B B B B B 560pF (561) S S S S S B B B B B B B B B B 680pF (681) S S S S S B B B B B B B B B B 820pF (821) S S S S S B B B B B B B B B B 1,000pF (102) S S S S S B B B B B B B B B B 1,200pF (122) X X X X B B B B B B B B B B 1,500pF (152) X X X X B B B B B B B B B B 1,800pF (182) X X X X B B B B B B B B B B 2,200pF (222) X X X X B B B B B B B B B B 2,700pF (272) X X X X D D D D D B B B B B 3,300pF (332) X X X X D D D D D B B B B B 3,900pF (392) D D D D D B B B B B 4,700pF (472) D D D D B B B B B 5,600pF (562) D^ D^ B B B B B 6,800pF (682) D^ D^ C C C C C 8,200pF (822) D^ D^ D D D D D 0.010µF (103) D^ D^ D D D D 0.015µF (153 D^ D^

www.element14.com www.farnell.com www.newark.com Page <5> V1.008/07/13 Multilayer SMD Ceramic Capacitors General Purpose Series 1. The letter in cell is expressed the symbol of product thickness. 2. The letter in cell with “^” mark is expressed product with Ag/Ni/Sn terminations. Capacitance Range (X7R Dielectric) Dielectric X7R Size 0603 0805 1206 Rated Voltage (VDC) 10 16 25 50 100 10 16 25 50 100 10 16 25 50 100 Capacitance 100pF (101) S S S S S B B B B B 120pF (121) S S S S S B B B B B 150pF (151) S S S S S B B B B B B B B B B 180pF (181) S S S S S B B B B B B B B B B 220pF (221) S S S S S B B B B B B B B B B 270pF (271) S S S S S B B B B B B B B B B 330pF (331) S S S S S B B B B B B B B B B 390pF (391) S S S S S B B B B B B B B B B 470pF (471) S S S S S B B B B B B B B B B 560pF (561) S S S S S B B B B B B B B B B 680pF (681) S S S S S B B B B B B B B B B 820pF (821) S S S S S B B B B B B B B B B 1,000pF (102) S S S S S B B B B B B B B B B 1,200pF (122) S S S S S B B B B B B B B B B 1,500pF (152) S S S S S B B B B B B B B B B 1,800pF (182) S S S S S B B B B B B B B B B 2,200pF (222) S S S S S B B B B B B B B B B 2,700pF (272) S S S S S B B B B B B B B B B 3,300pF (332) S S S S S B B B B B B B B B B 3,900pF (392) S S S S S B B B B B B B B B B 4,700pF (472) S S S S S B B B B B B B B B B 5,600pF (562) S S S S S B B B B B B B B B B 6,800pF (682) S S S S S B B B B B B B B B B 8,200pF (822) S S S S S B B B B B B B B B B 0.010µF (103) S S S S S B B B B B B B B B B 0.012µF (123) S S S S B B B B B B B B B B 0.015µF (153) S S S S B B B B B B B B B B 0.018µF (183) S S S S B B B B B B B B B B 0.022µF (223) S S S S B B B B B B B B B B 0.027µF (273) S S S S B B B B D B B B B B 0.033µF (333) S S S X B B B B D B B B B B

www.element14.com www.farnell.com www.newark.com Page <6> V1.008/07/13 Multilayer SMD Ceramic Capacitors General Purpose Series Dielectric X7R Size 0603 0805 1206 Rated Voltage (VDC) 10 16 25 50 100 10 16 25 50 100 10 16 25 50 100 Capacitance 0.039µF (393) S S S X B B B B D B B B B B 0.047µF (473) S S S X B B B B D B B B B B 0.056µF (563) S S S X B B B B D B B B B B 0.068µF (683) S S S X B B B B D B B B B B 0.082µF (823) S S S X B B B B D B B B B D 0.10µF (104) S S S X B B B B D B B B B D 0.12µF (124) S S X B B B D B B B B D 0.15µF (154) S S X D D D D C C C C G 0.18µF (184) S S X D D D D C C C C G 0.22µF (224) S S X D D D D C C C C G 0.27µF (274) X X X D D D C C C D 0.33µF (334) X X X D D D I C C C D 0.39µF (394) X X X D D D C C J P 0.47µF (474) X X X D D D I J J J P 0.56µF (564) D D D J J J P 0.68µF (684) D D D J J J P 0.82µF (824) D D D J J J P 1. The letter in cell is expressed the symbol of product thickness. Capacitance Range (Y5V Dielectric) Dielectric Y5V Size 0603 0808 1206 Rated Voltage (VDC) 6.3 10 16 25 50 6.3 10 16 25 50 10 16 25 50 100 Capacitance 0.010µF (103) S S S S A A A A B B B B B B 0.015µF (153) S S S S A A A A B B B B B B 0.022µF (223) S S S S A A A A B B B B B B 0.033µF (333) S S S S A A A A B B B B B B 0.047µF (473) S S S S A A A A B B B B B B 0.068µF (683) S S S S A A A A B B B B B B 0.10µF (104) S S S S A A A A B B B B B B 0.15µF (154) S S S S A A A A B B B B C 0.22µF (224) S S S S S A A A A B B B B C 0.33µF (334) S S S B B B B B B B B 0.47µF (474) S S B B B B B B B B 0.68µF (684) S X B B D D B B B B 1. The letter in cell is expressed the symbol of product thickness.

www.element14.com www.farnell.com www.newark.com Page <7> V1.008/07/13 Multilayer SMD Ceramic Capacitors General Purpose Series Packaging Dimension And Quantity: Reliability Test Conditions And Requirements Size Thickness (mm)/Symbol Paper tape Plastic tape 7” reel 13” reel 7” reel 13” reel 0603 (1608) 0.8 ±0.07 S 4k 15k - - 0805 (2012) 0.6 ±0.1 A 4k 15k - - 0.8 ±0.1 B 4k 15k - - 1.25 ±0.1 D - - 3k 10k 1.25 ±0.2 I - - 3k 10k 1206 (3216) 0.8 ±0.1 B 4k 15k - - 0.95 ±0.1 C - - 3k 10k 1.15 ±0.15 J - - 3k 10k 1.25 ±0.1 D - - 3k 10k 1.6 ±0.2 G - - 2k 10k No Item Test Condition Requirements

1 Visual and Me-

• No remarkable defect. Dimensions to conForm to individual specification sheet.

2 Capacitance Class I:NPO

Cap≤1,000pF 1.0±0.2Vrms, 1MHz±10% Cap>1,000pF 1.0±0.2Vrms, 1kHz±10% Class II:X7R, X5R, Y5V Cap≤10µF, 1.0±0.2Vrms, 1kHz±10% Cap>10µF, 0.5±0.2Vrms, 120Hz±20% NPO: Cap≥30pF, Q≥1000; Cap<30pF,Q≥400+20C X7R Rated 0805≥0.18µF ,1206≥0.47µF 25V ≤3.5% ≤7% 0603≥0.33µF ≤10% 0603≥0.47µF 16V ≤3.5% ≤5% 0603≥0.15µF; 0805≥0.68µF ≤10% 0603≥0.68µF 6.3V ≤10% - - Y5V: 25V ≤5% ≤9% 0603≧0.47µF 16V 10V ≤12.5% --- -- 6.3V ≤20% --- -- Q/ D.F. (Dissipation Factor)

www.element14.com www.farnell.com www.newark.com Page <8> V1.008/07/13 Multilayer SMD Ceramic Capacitors General Purpose Series No Item Test Condition Requirements

4 Dielectric

To apply voltage (≤100V) 250%. Duration: 1 to 5 sec. Charge and discharge current less than 50mA. No evidence of damage or flash over during test.

5 Insulation

Resistance To apply rated voltage for max. 120 sec. ≥10GX or RxC≥500X-F whichever is smaller.

6 Temperature

With no electrical load. NPO : -55°C to125°C at 25°C X7R : -55°C to 125°C at 25°C Y5V : -25°C to 85°C at 20°C NPO : Within ±30ppm/°C X7R : Within ±15% Y5V : Within +30%/-80% Adhesive Strength of Termination Pressurizing force: 5N (≤0603) and 10N (>0603) Test time: 10±1 sec. No remarkable damage or removal of the terminations.

8 Vibration

Vibration frequency: 10~55 Hz/min. Total amplitude: 1.5mm Test time: 6 hrs. (Two hrs each in three mutu- ally perpendicular directions.) No remarkable damage. Cap change and Q/D.F.: To meet initial spec.

9 Solderability Solder temperature: 235±5°C

Dipping time: 2±0.5 sec. 95% min. coverage of all metalized area.

10 Bending Test

The middle part of substrate shall be pressur- ized by means of the pressurizing rod at a rate of about 1mm per second until the deflection becomes 1mm and then the pressure shall be maintained for 5±1 sec. Measurement to be made after keeping at room temp. for 24±2 hrs. No remarkable damage. Cap change: NPO: within ±5% or ±0.5pF whichever is larger X7R, : within ±12.5% Y5V: within ±30% (This capacitance change means the change of capacitance under specified flexure of substrate from the capacitance measured before the test.)

11 Resistance to

Solder temperature: 270±5°C Dipping time: 10±1 sec Preheating: 120 to 150°C for 1min before im- merse the capacitor in a eutectic solder. Before initial measurement (Class II only): Perform 150+0/-10°C for 1 hr and then set for 48±4 hrs at room temp. Measurement to be made after keeping at room temp. for 48±4 hrs. No remarkable damage. Cap change: NPO: within ±2.5% or ±0.25pF whichever is larger X7R : within ±7.5% Y5V: within ±20% Q/D.F., I.R. and dielectric strength: To meet initial requirements. 25% max. leaching on each edge.

12 Temperature

Conduct the five cycles according to the tem- peratures and time. Step Temp. (°C) Time (min.) 1 Min. operating temp. +0/-3 30±3 2 Room temp. 2~3 3 Max. operating temp. +3/-0 30±3 4 Room temp. 2~3 Before initial measurement (Class II only): Perform 150+0/-10°C for 1 hr and then set for 48±4 hrs at room temp. Measurement to be made after keeping at room temp. for 48±4 hrs. No remarkable damage. Cap change: NPO: within ±2.5% or ±0.25pF whichever is larger X7R : within ±7.5% Y5V : within ±20% Q/D.F., I.R. and dielectric strength: To meet initial require- ments.

www.element14.com www.farnell.com www.newark.com Page <9> V1.008/07/13 Multilayer SMD Ceramic Capacitors General Purpose Series No Item Test Condition Requirements Humidity (Damp Heat) Steady State Test temp.: 40±2°C Humidity: 90~95% RH Test time: 500+24/-0hrs. Measurement to be made after keeping at room temp. for 48 ±4 hrs. No remarkable damage. Cap change: NPO: within ±5% or ±0.5pF whichever is larger X7R: ≥10V, within ±12.5%; 6.3V, within ±25% Y5V: ≥10V, within ±30%; 6.3V, within +30/-40% Q/D.F. value: NPO: More than 30pF Q≥350, 10pF≤C≤30pF, Q≥275+2.5C Less than 10pF Q≥200+10C X7R: Rated 0805≥0.18µF ,1206≥0.47µF 25V ≤5% ≤14% 0603≥0.33µF ≤15% 0603≥0.47µF 16V ≤5% ≤10% 0603≥0.15µF; 0805≥0.68µF ≤15% 0603≥0.68µF 6.3V ≤15% - - Y5V: 0805≧0.47µF 25V ≤7.5% ≤10% 0603≥0.1µF; 0805≥0.33µF ≤15% 0603≧0.47µF 16V 10V ≤20% - - 6.3V ≤30% - - I.R.: ≥10V, ≥1GΩ or RxC≥50Ω-F whichever is smaller. 6.3V, RxC≥10Ω-F Humidity (Damp Heat) Load Test temp.: 40±2°C Humidity: 90~95%RH Test time: 500+24/-0 hrs. To apply voltage : rated voltage. Measurement to be made after keeping at room temp. for 48±4 hrs. No remarkable damage. Cap change: NPO: ±7.5% or ±0.75pF whichever is larger. X7R : ≥10V, within ±12.5%; 6.3V, within ±25% Y5V: ≥10V, within ±30%; 6.3V, within +30/-40% Q/D.F. value: NPO: C≥30pF,Q≥200;C<30pF, Q≥100+10/3C

www.element14.com www.farnell.com www.newark.com Page <10> V1.008/07/13 Multilayer SMD Ceramic Capacitors General Purpose Series No Item Test Condition Requirements X7R: Rated 0805≥0.18µF ,1206≥0.47µF 25V ≤5% ≤14% 0603≥0.33µF ≤15% 0603≥0.47µF 16V ≤5% ≤10% 0603≥0.15µF; 0805≥0.68µF ≤15% 0603≥0.68µF 6.3V ≤15% - - Y5V: 0805≧0.47µF 25V ≤7.5% ≤10% 0603≥0.1µF; 0805≥0.33µF ≤15% 0603≧0.47µF 16V 10V ≤20% - - 6.3V ≤30% - - I.R.: ≥10V, ≥500MΩ or RxC≥25Ω-F whichever is smaller. 6.3V, RxC≥5Ω-F High Temperature Load Endurance) Test temp.: NPO,X7R: 125±3°C X5R, Y5V: 85±3°C To apply voltage: 200% of rated voltage. Test time: 1000+24/-0 hrs. Measurement to be made after keeping at room temp. for 48±4 hrs. No remarkable damage. Cap change: NPO: ±3.0% or ±0.3pF whichever is larger X7R : ≥10V, within ±12.5%; 6.3V, within ±25% Y5V: ≥10V, within ±30%; 6.3V, within +30/-40% Q/D.F. value: NPO: More than 30pF, Q≥350 10pF≤C<30pF, Q≥275+2.5C Less than 10pF, Q≥200+10C X7R: Rated 0805≥0.18µF ,1206≥0.47µF 25V ≤5% ≤14% 0603≥0.33µF ≤15% 0603≥0.47µF 16V ≤5% ≤10% 0603≥0.15µF; 0805≥0.68µF ≤15% 0603≥0.68µF 6.3V ≤15% - -

www.element14.com www.farnell.com www.newark.com Page <11> V1.008/07/13 Multilayer SMD Ceramic Capacitors General Purpose Series No Item Test Condition Requirements Y5V: 0805≧0.47µF 25V ≤7.5% ≤10% 0603≥0.1µF; 0805≥0.33µF ≤15% 0603≧0.47µF 16V 10V ≤20% - - 6.3V ≤30% - - I.R.: ≥10V, ≥1GΩ or RxC≥50Ω-F whichever is smaller. 6.3V, RxC≥10Ω-F Appendixes Tape & Reel Dimensions The dimension of paper tape The dimension of plastic tape Size 0603 0805 1206 Thickness S, X A B C, D, I B C, J, D G

www.element14.com www.farnell.com www.newark.com Page <12> V1.008/07/13 Multilayer SMD Ceramic Capacitors General Purpose Series The dimension of reel Size 0603, 0805, 1206 Reel size 7” 10” 13” A 178 ±0.10 250 ±1 330 ±1 N 60 +1/-0 100 ±1 100 ±1 Storage and handling conditions (1) To store products at 5°C to 40°C ambient temperature and 20 to 70%. related humidity conditions. (2) The product is recommended to be used within one year after shipment. Check solderability in case of shelf life extension is needed. Cautions: a. Don’t store products in a corrosive environment such as sulfide, chloride gas, or acid. It may cause oxidization of electrode, which easily be resulted in poor soldering. b. To store products on the shelf and avoid exposure to moisture. c. Don’t expose products to excessive shock, vibration, direct sunlight and so on. Recommended soldering conditions The lead-free termination MLCCs are not only to be used on SMT against lead-free solder paste, but also suitable against lead-containing solder paste. If the optimized solder joint is requested, increasing soldering time, temperature and concentration of N2 within oven are recommended. Part Number Table Description Part Number CAP, Ceramic, 0.1µF, 16V, X7R, 0603 B0603R104KCT CAP, Ceramic, 22pF, 50V, C0G/NP0, 0603 U0603C220JCT Capacitor, 0603, 100pF, 50V U0603C101JCT Description Part Number CAP, Ceramic, 0.01µF, 50V, X7R, 0603 U0603R103KCT CAP, Ceramic, 1,000pF, 50V, X7R, 0805 U0805R102KCT CAP, Ceramic, 0.01µF, 50V, X7R, 0805 U0805R103KCT

www.element14.com www.farnell.com www.newark.com Page <13> V1.008/07/13 Multilayer SMD Ceramic Capacitors General Purpose Series Description Part Number CAP, Ceramic, 0.1µF, 50V, X7R, 0805 U0805R104KCT CAP, Ceramic, 0.1µF, 50V, Y5V, 0805 U0805F104ZCT Capacitor, 0805, 100pF, 100V A0805C101JCT Capacitor, 0805, 220pF, 100V A0805C221JCT Capacitor, 0805, 1µF, 10V MCCA000269 Capacitor, 0805, 1µF, 25V MCCA000305 Capacitor, 0805, 1µF, 10V MCCA000269 Capacitor, 0805, 1µF, 25V MCCA000305 Capacitor, 0805, 10pF, 100V MCCA000390 Capacitor, 1206, 2.2µF, 10V MCCA000415 Capacitor, 1206, 1µF, 16V MCCA000429 Capacitor, 1206, 2.2µF, 16V MCCA000430 Capacitor, 1206, 4.7µF, 16V MCCA000431 Capacitor, 1206, 4.7nF, 25V MCCA000432 Capacitor, 1206, 10nF, 25V MCCA000433 Capacitor, 0603, 470nF, 10V MCCA000145 Capacitor, 1206, 10pF, 100V MCCA000480 Capacitor, 1206, 22pF, 100V MCCA000481 Capacitor, 1206, 100pF, 100V MCCA000482 Capacitor, 0805 33pF 100V A0805C330JNT Capacitor, 0805 47pF 100V A0805C470JNT Capacitor, 1206, 220pF, 100V MCCA000483 Capacitor, 1206, 330pF, 100V MCCA000484 Capacitor, 1206, 470pF, 100V MCCA000485 Capacitor, 1206, 1nF, 100V MCCA000486 Capacitor, 0805, 10pF, 100V MCCA000390 Capacitor, 1206, 4.7nF, 25V MCCA000432 Capacitor, 1206, 10nF, 25V MCCA000433 Capacitor, 1206, 2.2µF, 10V MCCA000415 Capacitor, 1206, 1µF, 16V MCCA000429 Capacitor, 1206, 2.2µF, 16V MCCA000430 Capacitor, 1206, 4.7µF, 16V MCCA000431 Capacitor, 0603, 470nF, 10V MCCA000145 Capacitor, 0805, 22pF, 100V A0805C220JCT Capacitor, 0805, 33pF, 100V A0805C330JCT Capacitor, 0805, 47pF, 100V A0805C470JCT Description Part Number Capacitor, 0805, 470pF, 100V A0805C471JCT Capacitor, 0805 0.22µF 16V B0805R224KNT Capacitor, 1206 47pF 100V A1206C470JNT Capacitor, 1206 220pF 100V A1206C221JNT Capacitor, 1206 1µF 16V B1206R105KNT Capacitor, 0805, 0.22µF, 16V B0805R224KCT Capacitor, 0805, 0.33µF, 16V B0805R334KCT Capacitor, 0805, 0.47µF, 16V B0805R474KCT Capacitor, 1206, 10pF, 100V MCCA000480 Capacitor, 1206, 22pF, 100V MCCA000481 Capacitor, 1206, 100pF, 100V MCCA000482 Capacitor, 1206, 220pF, 100V MCCA000483 Capacitor, 1206, 330pF, 100V MCCA000484 Capacitor, 1206, 470pF, 100V MCCA000485 Capacitor, 1206, 1nF, 100V MCCA000486 Capacitor, 0603 22nF 25V T0603R223KNT Capacitor, 0603 47nF 25V T0603R473KNT Capacitor, 0603 1.0nF 50V U0603R102KNT Capacitor, 0603 470nF 10V N0603F474ZNT Capacitor, 0805 1µF 10V N0805R105KNT Capacitor, 0805 10nF 50V U0805R103KNT Capacitor, 1206 0.47µF 25V T1206R474KNT Capacitor, 0603, 220pF, 50V U0603C221JCT Capacitor, 0603, 1nF, 50V U0603C102JCT Capacitor, 0603, 22nF, 25V T0603R223KCT Capacitor, 0603, 47nF, 25V T0603R473KCT Capacitor, 0603, 1nF, 50V U0603R102KCT Capacitor, 0603, 100nF, 25V T0603F104ZCT Capacitor, 0805, 1nF, 50V U0805C102JCT Capacitor, 0805, 2.2nF, 50V U0805C222JCT Capacitor, 0805, 22nF, 50V U0805R223KCT Capacitor, 0805, 47nF, 50V U0805R473KCT Capacitor, 1206, 0.33µF, 25V T1206R334KCT Capacitor, 1206, 0.47µF, 25V T1206R474KCT Capacitor, 1206, 10nF, 50V U1206R103KCT Capacitor, 1206, 100nF, 50V U1206R104KCT Important Notice : This data sheet and its contents (the “InFormation”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for inFormation purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The InFormation is subject to change without notice and replaces all data sheets previously supplied. The InFormation supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the InFormation and the suitability of the products for their purpose and not make any assumptions based on inFormation included or omitted. Liability for loss or damage resulting from any reliance on the InFormation or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012.