DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Anaren, Inc. / 6635 Kirkville Road / East Syracuse, NY 13057  Frequency range: 902-928 MHz (N. America) and 868-870 MHz (Europe)  FCC, IC and ETSI compliant, shielded package  Digital RSSI output  Programmable output power up to +10dBm  High sensitivity (-112 dBm at 1.2 kBaud, 915 MHz 1% packet error rate)  Ultra-small package size 9 x 16 x 2.5mm  LGA footprint  RoHS compliant  Operating temperature -40 to +85C  Impedance-controlled, multi-layer PCB  1.8 to 3.6 VDC  Low current consumption (15 mA in RX, 1.2 kBaud, 915 MHz)  200 nA sleep mode current consumption  Efficient SPI interface; all registers can be programmed with one “burst” transfer  Available in tape & reel and matrix tray A110LR09A The A110LR09A is a ULTRA low cost, high-performance, FCC & IC certi- fied radio module that incorporates the Texas Instruments CC110L “value line” transceiver chip in the industry’s smallest package (9 x 16 x 2.5mm). 110L Series Features Benefits Block diagram This product shall not be used in any of the following products or systems without prior express written permission from Anaren Microwave, Inc: (i) implantable cardiac rhythm management systems, including without limitation pacemakers, defibrillators and cardiac resynchronization devices; (ii) external cardiac rhythm management systems that communicate directly with one or more implantable medical devices; or (iii) other devices used to monitor or treat cardiac function, including without limitation pressure sensors, biochemical sensors and neurostimulators.  Minimal RF engineering experience necessary  No additional “Intentional Radiator” certifica- tion required (FCC CFR 47 Part 15, IC RSS- 210)  Minimal real estate required  Easily implemented on a two layer PCB  No additional harmonic filtering required  100% RF-tested in production  Common footprint for product family  No additional DC decoupling required  Integrated analog temperature sensor  Excellent receiver selectivity and blocking performance  Suitable for frequency hopping systems, thanks to a fast-settling frequency synthesizer with 90 μs settling time  Impedance-matched balun for optimized effi- ciency  Support for asynchronous and synchronous serial receive/transmit mode for backwards compatibility with existing radio communica- tion protocols PLEASE NOTE: Additional information on the Texas Instruments CC110L device can be found in the company’s latest datasheet release at http://www.ti.com

Anaren, Inc. / 6635 Kirkville Road / East Syracuse, NY 13057 Product overview Nomenclature Caution! ESD sensitive device. Precautions should be used when handling the device in order to prevent permanent damage. The A110LR09A is a high-performance, dual- band FCC & IC certified and ETSI compliant radio module that incorporates the Texas Instruments CC110L “value line” low-cost transceiver chip in the industry’s smallest package (9 x 16 x 2.5mm) and is compatible with all TI-approved software stacks. With an LGA pad footprint, this module is de- signed to effortlessly integrate into a wide range of applications, including: industrial control, build- ing automation, low-power wireless sensor net- works, lighting control, and automated meter reading. The A110LR09A has an RoHS-compliant ENIG finish and is packaged on tape and reel for high- volume automated manufacturing. Footprint Pin diagram A (Anaren)

1 Chip series (CC1101, CC110L, CC2500)

2 Function (R = radio only)

3 Frequency band (x100MHz)

4 Form factor (A = Internal Antenna, C = Connector)

5 Design ID (00 = Default)

6 Application (G = General)

7 Packaging (R = Tape/Reel, M = Matrix Tray)

Refer to User’s Manual for additional layout guidelines. Dimensions in mm. DNC = Do Not Connect