A1101R08C_V01 ANAREN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

Anaren, Inc. | 6635 Kirkville Road | East Syracuse, NY 13057 The item described in this product brief is part of our total AIR Support solution. To learn more, visit our website or just ask us! Anaren Integrated Radio (AIR) Low-power RF modules, firmware & development tools that make it easy to ’go wireless’ Features Benefits Block diagram  Frequency range: 868-870 MHz  ETSI-compliant, shielded package  Digital RSSI output  Programmable output power up to +10dBm  High sensitivity (1.2 kBaud, 1% packet error rate) -112 dBm at 869 MHz (compliant to ETSI)  Ultra-small package size: 9 x 12 x 2.5mm  Industry-standard U.FL connector  LGA footprint  RoHS compliant  Operating temperature -40 to +85˚C  Impedance-controlled, multi-layer PCB  1.8 to 3.6 VDC  Low current consumption (15 mA in RX, 1.2 kBaud, 868 MHz)  200 nA sleep mode current consumption  Efficient SPI interface; all registers can be programmed with one “burst” transfer  Available in tape & reel and matrix tray  Module weight approximately 0.4 grams The A1101R08C is a high-performance, ETSI-compliant connectorized radio module that incorporates the Texas Instruments CC1101 transceiver, all in the industry’s smallest package: 9 x 12 x 2.5mm.  Minimal RF engineering experience necessary  No additional “Intentional Radiator” certification required (ETSI EN 300 220)  Minimal real estate required  Easily implemented on a two layer PCB  No additional harmonic filtering required  100% RF-tested in production  Common footprint for similar products in family  No additional DC decoupling required  Integrated analog temperature sensor  Excellent receiver selectivity and blocking performance  Suitable for frequency hopping systems, thanks to a fast-settling frequency synthesizer with 90 μs settling time  Impedance-matched balun for optimized efficiency  Support for asynchronous and synchronous serial receive/transmit mode for backwards compatibility with existing radio communication protocols PLEASE NOTE: Additional information on the Texas Instruments CC1101 device can be found in the company’s latest datasheet release at http://www.ti.com This product is not to be used in any implantable medical device or external medical device intended to regulate or monitor biological functions, including but not limited to devices such as pacemakers, defibrillators, cardiac resynchronization devices, pressure sensors, biochemical stimulators and neurostimulators. ANAREN MAKES NO WARRANTY OF FITNESS OR MERCHANTABILITY OF THIS PRODUCT FOR ANY USE OF THIS TYPE. Anaren shall not be responsible for any consequential damages arising from the sale or use of this product for any use of this type. The ultimate user of the product assumes all risk of personal injury or death arising from a prohibited use. A1101R08C

1101 Series

The item described in this product brief is part of our total AIR Support solution. To learn more, visit our website or just ask us! For more information see product User’s Manual, available online. Anaren Integrated Radio (AIR) Low-power RF modules, firmware & development tools that make it easy to ’go wireless’ Anaren, Inc. | 6635 Kirkville Road | East Syracuse, NY 13057 Product overview Layout Information Pin diagram Nomenclature The A1101R08C is a high-performance, ETSI- compliant connectorized radio module that incorporates the Texas Instruments CC1101 transceiver chip in the industry’s smallest package (9 x 12 x 2.5mm) and is compatible with all TI- approved software stacks. With an LGA pad footprint and industry-standard U.FL button connector receptacle, this module is designed to effortlessly integrate into a wide range of applications, including: industrial control, building automation, low-power wireless sensor networks, lighting control, and automated meter reading. The A1101R08C has an RoHS-compliant ENIG finish and is packaged on tape & reel or in matrix trays for high-volume automated manufacturing. Top 2 pads optional for compatibility with other modules. Refer to User’s Manual for additional layout guidelines. Dimensions in mm. NC = “NO Connection” Pin is NOT connected internally. DNC = “Do Not Connect” Pin reserved for internal use, ensure mating footprint pads are isolated. GND = “Ground” Connect the maximum number possible (minimum one for proper operation). Caution! ESD sensitive device. Precautions should be used when handling the device in order to prevent permanent damage. A (Anaren)

1 Chip series (CC1101, CC110L, CC2500)

2 Function (R = radio only)

3 Frequency band (x100MHz)

4 Form factor (A = Internal Antenna, C = Connector)

5 Design ID (00 = Default)

6 Application (G = General)

7 Packaging (R = Tape/Reel, M = Matrix Tray)

Ground detail (corner) Ground detail (edge) Footprint (PWB) Viewed from top side 1308a