A0305XT-1WR2_15 MORNSUN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

A_XT-1WR2 Series 2015.04.15-A/2 Page 1 of 5 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation 1W, Fixed input voltage, isolated & unregulated dual output Patent Protection RoHS

FEATURES

z Operating temperature range: -40℃ to +105℃ z High efficiency up to 82% z Miniature SMD package z Isolation voltage: 1.5K VDC z Internal surface mounted design z No external component required z International standard pin-out A_XT-1WR2 series are specially designed for applications where an isolated voltage is required in a distributed power supply system. They are suitable for 1. Where the voltage of the input power supply is stable (voltage variation: ±10%Vin); 2. Where isolation between input and output is necessary (isolation voltage ≤1500VDC); 3. Where the output voltage regulation is not strictly required; 4. Typical application: preceding-stage interference isolation condition; ground-interference canceled condition; digit circuit condition; Voltage-isolation converting condition; normal low-frequency artificial circuit condition; relay drive circuit condition, etc. Selection Guide Certification Part No. Input Voltage (VDC) Output Efficiency (%,Min./Typ.) @F u l lL o a d Max. Capacitive Load (μF) Nominal (Range) Output Voltage (VDC) Output Current (mA)(Max./Min.) CE A0305XT-1WR2 3.3 (2.97-3.63) ±5 ±100/±10 72/76 100 A0312XT-1WR2 ±12 ±42/±5 73/77 A0315XT-1WR2 ±15 ±33/±3 74/78 A0505XT-1WR2 (4.5-5.5) ±5 ±100/±10 76/80 A0509XT-1WR2 ±9 ±56/±6 76/80 A0512XT-1WR2 ±12 ±42/±5 75/79 A0515XT-1WR2 ±15 ±33/±3 77/81 A0524XT-1WR2 ±24 ±21/±2 77/81 A1205XT-1WR2 (10.8-13.2) ±5 ±100/±10 76/80 A1209XT-1WR2 ±9 ±56/±6 76/80 A1212XT-1WR2 ±12 ±42/±5 77/81 A1215XT-1WR2 ±15 ±33/±3 77/81 A1224XT-1WR2 ±24 ±21/±2 77/81 A1515XT-1WR2 15 A2405XT-1WR2 (21.6-26.4) ±5 ±100/±10 76/80 A2409XT-1WR2 ±9 ±56/±6 76/80 A2412XT-1WR2 ±12 ±42/±5 77/81 A2415XT-1WR2 ±15 ±33/±3 78/82 A2424XT-1WR2 ±24 ±21/±2 74/80 Note: *The capacitive loads of positive and negative outputs are identical. Input Specifications Item Operating Conditions Min. Typ. Max. Unit Input Current (full load / no-load) mA 5V input -- 250/20 --/60 12V input -- 104/15 --/50 15V input -- 83/12 --/35 24V input -- 52/10 --30 Reflected Ripple Current -- 15 -- m A

A_XT-1WR2 Series 2015.04.15-A/2 Page 2 of 5 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation Surge Voltage (1sec. max.) 3.3V input -0.7 -- 5 VDC 5V input -0.7 -- 9 12V input -0.7 -- 18 15V input -0.7 -- 21 24V input -0.7 -- 30 Input Filter Filter capacitor Hot Plug Unavailable Output Specifications Item Operating Conditions Min. Typ. Max. Unit Output Voltage Accuracy See tolerance envelope curve(Fig. 1) Line Regulation Input voltage change: ±1% -- -- ±1.2 -- Load Regulation 10%-100% load 5VDC output -- 12 -- 9VDC output -- 9 -- 12VDC output -- 8 -- 15VDC output -- 7 -- 24VDC output -- 6 -- Ripple & Noise* 20MHz bandwidth -- 60 150 mVp-p Temperature Coefficient Full load -- -- ±0.03 %/℃ Short Circuit Protection** A24xxXT-1WR2/A0524XT-1WR2 -- -- 1 s Others Continuous, self-recovery Note: *Ripple and noise are measured by “parallel cable” method, please see DC-DC Converter Application Notes for specific operation; **Supply voltage must be discontinued at the end of short circuit duration for A0524XT-1WR2 model and A24xxXT-1WR2 series. General Specifications Item Operating Conditions Min. Typ. Max. Unit Isolation Voltage Input-output, with the test time of 1 minute and the leak current lower than 1mA 1500 -- -- VDC Isolation Resistance Input-output, isolation voltage 500VDC 1000 -- -- M Ω Isolation Capacitance Input-output, 100KHz/0.1V -- 20 -- pF Operating Temperature Derating when operating temperature up to1 0 0℃,( s e e Fig. 2) -40 -- 105 ℃Storage Temperature -55 -- 125 Casing Temperature Rise Ta=25 ℃, nominal input, full load output -- 25 -- Pin Welding Resistance Temperature Welding spot is 1.5mm away from the casing, 10 seconds -- -- 300 Storage Humidity Non-condensing -- -- 95 %RH Reflow Soldering Temperature Peak temp.≤245℃,m a x i m u md u r a t i o ntime≤60s at 217℃. For actual application, please refer to IPC/JEDEC J-STD-020D.1. Switching Frequency Full load, nominal input voltage -- 100 -- KHz MTBF MIL-HDFK-217F@25 ℃ 3500 -- -- K hours Physical Specifications Casing Material Epoxy resin (UL94-V0) Dimensions 15.24*11.20*7.25 mm Weight 2.0g (Typ.) Cooling Method Free air convection EMC Specifications EMI CE CISPR22/EN55022 CLASS B (see Fig. 5 for recommended circuit) RE CISPR22/EN55022 CLASS B (see Fig. 5 for recommended circuit) EMS ESD IEC/EN61000-4-2 Contact ±6KV perf. Criteria B

A_XT-1WR2 Series 2015.04.15-A/2 Page 3 of 5 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation Product Characteristic Curve -10% 80%20%10% 40% 60% -5% +5% +10% +15% 100% Typ. Min. Max. -7.5% -2.5% +2.5% Output Current Percent(%) (Nominal Input Voltage) Output Voltage (%)Accuracy Tolerance Envelope Curve Fig. 1 120 100 -40 0 40 80 100 105 Output Power Percentage(%) Ambi ent Temperature( )℃ Safe Operating Area Te m pe ratu re D e rati ng C urv e Fig. 2 A0505XT-1WR2 100 Efficiency(%) Input Voltage(V) Efficiency Vs Input Voltage (Full Load) A0505XT-1WR2 100 10 20 30 40 50 60 70 80 90 100 Efficiency(%) Output Current Percentage (%) Efficiency Vs Output Load(Vin=5V) A1205XT-1WR2 100 Efficiency(%) Input Voltage(V) Efficiency Vs Input Voltage (Full Load) A1205XT-1WR2 100 10 20 30 40 50 60 70 80 90 100 Efficiency(%) Output Current Percentage (%) Efficiency Vs Output Load(Vin=12V) Design Reference 1. Typical application circuit If it is required to further reduce input and output ripple, a filter capacitor may be connected to the input and output terminals, see Fig.3. Moreover, choosing a suitable filter capacitor is very important, start-up problems may be caused if the capacitance is too large. Under the condition of safe and reliable operation, the recommended capacitive load values are shown in Table 1. The simplest device for output voltage regulation, over-voltage and over-current protection is a linear voltage regulator with overheat protection that is connected to the input or output end in series (see Fig. 4). Vin GND +Vo 0VDCCin DC Cout Cout -Vo Fig.3 Vin GND +Vo DC DC -Vo REG REG REG Fig.4

A_XT-1WR2 Series 2015.04.15-A/2 Page 4 of 5 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation Recommended capacitive load value table (Table 1) Vin(VDC) Cin(μF) Vo (VDC) Cout(μF) 3.3 4.7 ±5 4.7 5 4.7 ±9 2.2 12 2.2 ±12 1 15 2.2 ±15 1 24 1 ±24 0.47 2. EMC solution-recommended circuit Vin GND +Vo -Vo DC/DC LOAD LDM Vin GND CY Fig. 4 Input voltage (VDC) 3.3/5/12 15/24 EMI C1 4.7 μF /50V C2 Refer to the Cout in Fig.3 LDM 6.8 μH CY -- 1nF /2KV Note: 1. 24V input series, 24V output series is subject to CY (CY : 1nF/2KV). 2. It is not needed to add the component in the peripheral circuit when parameter with the symbol of "--". 3. Output load requirements When using, the minimum load of the module output should not be less than 10% of the nominal load. In order to meet the performance parameters of this datasheet, please connect a 10% dummy load in parallel at the output end, the dummy load is generally a resistor, Please note that the resistor needs to be used in derating. 4. For more information please find DC-DC converter application notes on www.mornsun-power.com Dimensions and Recommended Layout 2EXT1WAR201-A0 Note:Grid2.54*2.54mm Note: Unit:mm[inch] Pinsectiontolerances:±0.10[±0.004] Generaltolerances:±0.25[±0.010] NC:NoConnection A 7.25[0.285] 7.00[0.276] 0.88[0.035] 710 0~5° 0.25[0.010]42 8.30[0.327] TopView FrontView RightView 710 FunctionPin Pin-Out TopView -Vo5 Vin2 GND +Vo NC 1.00[0.039] 2.54[0.100] 2.10[0.083] 12.20[0.480] 0.60[0.024] 2.54[0.100] 10.16[0.400] 10.16[0.400] A 0.10 THIRDANGLEPROJECTION

A_XT-1WR2 Series 2015.04.15-A/2 Page 5 of 5 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation Notes: 1. Packing information please refer to Product Packing Information which can be downloaded from www.mornsun-power.com.P a c k i n g bag number: 58210024; 2. If the product is not operated within the required load range, the product performance cannot be guaranteed to comply with all parameters in the datasheet; 3. The maximum capacitive load offered were tested at nominal input voltage and full load; 4. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25 ℃, humidity<75% with nominal input voltage and rated output load; 5. All index testing methods in this datasheet are based on our Company’s corporate standards; 6. The performance parameters of the product models listed in this manual are as above, but some parameters of non-standard model products may exceed the requirements mentioned above. Please contact our technicians directly for specific information; 7. We can provide product customization service; 8. Specifications are subject to change without prior notice. MORNSUN Guangzhou Science & Technology Co., Ltd. Tel: 86-20-38601850-8801 Fax: 86-20-38601272 E-mail: info@mornsun.cn