MMRF1019N NXP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 13

Technical content

Features

 Characterized with Series Equivalent Large- -Signal Impedance Parameters  Qualified Up to a Maximum of 50 VDD Operation  Integrated ESD Protection  Greater Negative Gate- -Source Voltage Range for Improved Class C Operation  In Tape and Reel. R4 Suffix = 100 Units, 16 mm Tape Width, 7- -inch Reel. Table 1. Maximum Ratings Table 2. Thermal Characteristics

  1. MTTF calculator available at http://www.freescale.com/rf. Select Software & Tools/Development Tools/Calculators to access MTTF

Select Documentation/Application Notes - - AN1955.

1090 MHz, 10 W, 50 V

Figure 1. Pin Connections  Freescale Semiconductor, Inc., 2014.All rights reserved.

Freescale Semiconductor, Inc. Table 3. ESD Protection Characteristics Table 4. Moisture Sensitivity Level Table 5. Electrical Characteristics(TA =2 5C unless otherwise noted)

Freescale Semiconductor, Inc. Figure 2. MMRF1019NR4 Test Circuit Schematic Table 6. MMRF1019NR4 Test Circuit Component Designations and Values

Freescale Semiconductor, Inc. Figure 3. MMRF1019NR4 Test Circuit Component Layout

Freescale Semiconductor, Inc. Figure 12. Series Equivalent Source and Load Impedance

Freescale Semiconductor, Inc. PACKAGE DIMENSIONS

Freescale Semiconductor, Inc. MMRF1019NR4

Freescale Semiconductor, Inc.

Freescale Semiconductor, Inc. MMRF1019NR4 PRODUCT DOCUMENTATION AND SOFTWARE Refer to the following resources to aid your design process. Application Notes  AN1955: Thermal Measurement Methodology of RF Power Amplifiers Engineering Bulletins  EB212: Using Data Sheet Impedances for RF LDMOS Devices Software  Electromigration MTTF Calculator For Software, do a Part Number search at http://www.freescale.com, and select the “Part Number” link. Go to the Software & Tools tab on the part’s Product Summary page to download the respective tool.

REVISION HISTORY

The following table summarizes revisions to this document. Revision Date Description

0 July 2014  Initial Release of Data Sheet

Freescale Semiconductor, Inc. Information in this document is provided solely to enablesystem and software implementers to use Freescale products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits based on the information in this document. Freescale reserves the right to make changes without further notice to any products herein. Freescale makes no warranty, representation, or guarantee regarding the suitability of its products for any particularpurpose, nor does Freescale assume any liability arising outof the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters that may be provided in Freescale data sheets and/or specifications can and do vary in different applications, and actual performance may vary over time. All operating parameters, including “typicals,” must be validated for each customer application by customer’s technical experts. Freescale does not convey any license under its patent rights nor the rights of others. Freescale sells products pursuant to standard terms and conditions of sale, which can be found at the following address: freescale.com/SalesTermsandConditions. Freescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc., respective owners. E 2014 Freescale Semiconductor, Inc. How to Reach Us: Home Page: freescale.com Web Support: freescale.com/support Document Number: MMRF1019N Rev. 0, 7/2014