99786 3M | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
November, 2011 3M™ Double Coated Tape 99786 Product Description Finite Element Analysis (FEA) data is available for this product at: 3m.com/FEA 3M™ Double Coated Tapes 99786 with 3M™ Adhesive 300MP provides high adhesion to a wide variety of materials, including plastics and foams and has a thin nonwoven carrier for dimensional stability and improved handling. Product Features
- Excellent adhesion to open cell foams. • Consistent adhesive performance to many plastics. • Polycoated liner for ease of handling.
3M™ Double Coated Tape 99786 Technical Information Note The following technical information and data should be considered representative or typical only and should not be used for specication purposes. Typical Physical Properties Property Values Attribute Modier Adhesive Type 300MP Adhesive Carrier Nonwoven Adhesive Thickness 0.14 mm 5.5 mil Liner 58# Polycoated Kraft Liner Color Tan, 3M print Primary Liner Thickness 0.11 mm 4.2 mil Typical Performance Characteristics 90° Peel Adhesion Substrate
6.7 N/cm 61 oz/in Stainless Steel
5.4 N/cm 49 oz/in ABS
5.5 N/cm 50 oz/in Polycarbonate (PC)
Property: 90° Peel AdhesionMethod: ASTM D3330Dwell/Cure Time: 72Dwell Time Units: hrTemp C: 22CTemp F: 72FEnvironmental Condition: 52%RHBacking: 2 mil Aluminum Foilnotes: 12 in/min (300 mm/min) Relative High Temperature Operating Ranges Test Condition 149 °C 300 °F Short Term (minutes, hours) 93 °C 200 °F Long Term (days, weeks) Property: Relative High Temperature Operating Ranges Table continued on next page 180° Peel Adhesion Substrate
5.9 N/cm 54 oz/in Stainless Steel
5.9 N/cm 54 oz/in Polycarbonate (PC)
3M™ Double Coated Tape 99786 Typical Performance Characteristics (continued) 180° Peel Adhesion Substrate
5.2 N/cm 47 oz/in ABS
Property: 180° Peel AdhesionMethod: ASTM D3330Dwell/Cure Time: 72Dwell Time Units: hrTemp C: 22CTemp F: 72FEnvironmental Condition: 52%RHBacking: Aluminum Foilnotes: 12 in/min (300 mm/min) Property Values Method Test Condition Liner Release 4.4 N/cm 40 oz/in ASTM D3330 90 in/min, Room Temperature Handling/Application Information Application Ideas
- Foam lamination • Gasket attachment • Insulator attachment • General attachment • Nameplate attachment Directions for Use Handling Recommendations: • Rolls should be handled at a minimum and handled by their core and top layer, without applying a lot of nger pressure. • Do not handle the rolls by their sides, as this can cause the sides of the adhesive to bond with ngertips. For additional information, please refer to the Laminating Adhesives 300MP Technical Bulletin (70-0709-3905-6). Storage and Shelf Life Trademarks 3M is a trademark of 3M Company. References Property Values 3m.com Product Page https://www.3m.com/3M/en_US/company-us/all-3m-products/~/3M-Double-Coated-Tape-99786?N=5002385+3293240959&rt=rud Safety Data Sheet (SDS) https://www.3m.com/3M/en_US/company-us/SDS-search/results/?gsaAction=msdsSRA&msdsLocale=en_US&co=ptn&q=99786
3M™ Double Coated Tape 99786 Family Group ISO Statement Recognition/Certication 99786 99786NP Relative High Temperature Operating Ranges (°C) Test Condition: Short Term (minutes, hours) 149 149 Relative High Temperature Operating Ranges (°C) Test Condition: Long Term (days, weeks) 93 93 Liner Color Attribute Modier: Primary Tan, 3M print Tan Adhesive Type 300MP 300MP Adhesive Carrier Nonwoven Nonwoven Adhesive Thickness (mm) 0.14 0.14 Liner 58# Polycoated Kraft 58# Polycoated Kraft Liner Thickness (mm) 0.11 0.11 This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001 standards. TSCA: This product is dened as an article under the Toxic Substances Control Act and therefore, it is exempt from inventory listing requirements.
3M™ Double Coated Tape 99786 Information 3M United States 3M Center St. Paul, MN 55144-1000 800-362-3550 www.3M.com Please recycle. © 3M 2021. All Rights Reserved. The brands listed above are trademarks of 3M Technical Information: The technical information, guidance, and other statements contained in this document or otherwise provided by 3M are based upon records, tests, or experience that 3M believes to be reliable, but the accuracy, completeness, and representative nature of such information is not guaranteed. Such information is intended for people with knowledge and technical skills sucient to assess and apply their own informed judgment to the information. No license under any 3M or third party intellectual property rights is granted or implied with this information. Warranty, Limited Remedy, and Disclaimer: Unless a dierent warranty is specically stated on the applicable 3M product packaging or product literature (in which case such warranty governs), 3M warrants that each 3M product meets the applicable 3M product specication at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. If a 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price. Limitation of Liability: Except for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be liable for any loss or damage arising from or related to the 3M product, whether direct, indirect, special, incidental, or consequential (including, but not limited to, lost prots or business opportunity), regardless of the legal or equitable theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability.