MUR405 ONSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 9

Technical content

Features

  • Ultrafast 25 ns, 50 ns and 75 ns Recovery Times
  • 175°C Operating Junction Temperature
  • Low Forward V oltage
  • Low Leakage Current
  • High Temperature Glass Passivated Junction
  • Reverse V oltage to 600 V
  • Shipped in Plastic Bags, 500 per Bag
  • Available in Tape and Reel, 1500 per Reel, by Adding a “RLG’’ Suffix to the Part Number
  • MUR460 available in Fan Fold Ammo Pak, 1000 per Box, by adding a “FFG” suffix to the part number
  • These are Pb−Free Packages* Mechanical Characteristics:
  • Case: Epoxy, Molded
  • Weight: 1.1 Gram (Approximately)
  • Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable
  • Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds
  • Polarity: Cathode indicated by Polarity Band *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. AXIAL LEAD CASE 267 STYLE 1 ULTRAFAST RECTIFIERS

4.0 AMPERES, 50−600 VOLTS

See detailed ordering and shipping information in the package dimensions section on page 3 of this data sheet.

ORDERING INFORMATION

www.onsemi.com A = Assembly Location MUR4xx = Device Number x = 05, 10, 15, 20, 40, 60 YY = Year WW = Work Week /C0071 =P b−Free Package MARKING DIAGRAM A MUR 4xx YYWW/C0071 /C0071 (Note: Microdot may be in either location)

MUR405, MUR410, MUR415, MUR420, MUR440, MUR460 www.onsemi.com MAXIMUM RATINGS Rating Symbol MUR Unit405 410 415 420 440 460 Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 50 100 150 200 400 600 V Average Rectified Forward Current (Square Wave) (Mounting Method #3 Per Note 2) IF(AV) 4.0 @ TA = 80°C 4.0 @ TA = 40°C A Nonrepetitive Peak Surge Current (Surge applied at rated load conditions, half wave, single phase, 60 Hz) IFSM 125 110 A Operating Junction Temperature & Storage Temperature TJ, Tstg /C004265 to +175 °C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. THERMAL CHARACTERISTICS Rating Symbol MUR Unit405 410 415 420 440 460 Maximum Thermal Resistance, Junction−to−Ambient R/C0113JA See Note 2 °C/W Maximum Thermal Resistance, Junction−to−Case Body /C0089/C0113JC 6.6 °C/W

ELECTRICAL CHARACTERISTICS

Unit405 410 415 420 440 460 Maximum Instantaneous Forward Voltage (Note 1) (iF = 3.0 A, TJ = 150°C) (iF = 3.0 A, TJ = 25°C) (iF = 4.0 A, TJ = 25°C) vF 0.71 0.88 0.89 1.05 1.25 1.28 V Maximum Instantaneous Reverse Current (Note 1) (Rated dc Voltage, TJ = 150°C) (Rated dc Voltage, TJ = 25°C) iR 150 250 /C0109A Maximum Reverse Recovery Time (IF = 1.0 A, di/dt = 50 A//C0109s) (IF = 0.5 A, iR = 1.0 A, IREC = 0.25 A) trr ns Maximum Forward Recovery Time (IF = 1.0 A, di/dt = 100 A//C0109s, Recovery to 1.0 V) tfr 25 50 ns Controlled Avalanche Energy (Maximum) Waval 5 mJ Typical Peak Reverse Recovery Current (IF = 1.0 A, di/dt = 50 A//C0109s) IRM 0.8 1.7 A 1. Pulse Test: Pulse Width = 300 /C0109s, Duty Cycle /C01182.0%.

MUR405, MUR410, MUR415, MUR420, MUR440, MUR460 www.onsemi.com Device Package Shipping† MUR405G Axial Lead*

500 Units / Bag

MUR410G Axial Lead* MUR410RLG Axial Lead* 1500 / Tape & Reel MUR415G Axial Lead* 500 Units / Bag MUR415RLG Axial Lead* 1500 / Tape & Reel MUR420G Axial Lead* 500 Units / Bag MUR420RLG Axial Lead* 1500 / Tape & Reel MUR440G Axial Lead* 500 Units / Bag MUR440RLG Axial Lead* 1500 / Tape & Reel MUR460G Axial Lead* 500 Units / Bag MUR460FFG Axial Lead* 1000 Units / Box MUR460RLG Axial Lead* 1500 / Tape & Reel †For information on tape and reel and ammo pak specifications, including part orientation, tape sizes and box dimensions, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *These packages are inherently Pb−Free.

Figure 11. Typical Non−Repetitive Surge Current *Typical performance based on a limited sample size. ON Semiconductor does not guarantee ratings not listed in the Maximum Ratings table.

MUR405, MUR410, MUR415, MUR420, MUR440, MUR460 www.onsemi.com Lead Length, L (IN)Mounting Method 1/8 1/4 1/2 Units 58R/C0113JA 51 53 59 61 °C/W °C/W °C/W TYPICAL VALUES FOR R/C0113JA IN STILL AIR Data shown for thermal resistance junction−to−ambient (R/C0113JA) for the mountings shown is to be used as typical guideline values for preliminary engineering or in case the tie point temperature cannot be measured. NOTE 2 — AMBIENT MOUNTING DATA MOUNTING METHOD 1 MOUNTING METHOD 2 MOUNTING METHOD 3 ÉÉÉÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉÉÉÉ L L P.C. Board Where Available Copper Surface area is small. ÉÉÉÉÉÉÉÉÉÉÉÉ L L Vector Push−In Terminals T−28 ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ L = 1/2 Board Ground Plane P.C. Board with 1−1/2″ x1 −1/2″ Copper Surface

K D B SCALE 1:1 CASE 267−05 ISSUE G DATE 06/06/2000 AXIAL LEAD STYLE 1: PIN 1. CATHODE (POLARITY BAND) 2. ANODE DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.287 0.374 7.30 9.50 B 0.189 0.209 4.80 5.30 D 0.047 0.051 1.20 1.30 STYLE 2: NO POLARITY NOTES: 1. DIMENSIONS AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 267-04 OBSOLETE, NEW STANDARD 267-05. MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. 98ASB42170BDOCUMENT NUMBER: DESCRIPTION: Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1AXIAL LEAD © Semiconductor Components Industries, LLC, 2019 www.onsemi.com

onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. ADDITIONAL INFORMATION TECHNICAL PUBLICATIONS: Technical Library: www.onsemi.com/design/resources/technical−documentation onsemi Website: www.onsemi.com ONLINE SUPPORT: www.onsemi.com/support For additional information, please contact your local Sales Representative at www.onsemi.com/support/sales