1N4001_V01 ONSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 8

Technical content

Your Feedback is Important to Us! Please take a moment to participate in our short survey. At onsemi, we are dedicated to delivering technical content that best meets your needs. Help Us Improve – Take the Survey This survey is intended to collect your feedback, capture any issues you may encounter, and to provide improvements you would like to suggest. We look forward to your feedback. To learn more about onsemi, please visit our website at www.onsemi.com Thank you for your interest in onsemi products. Your technical document begins on the following pages. onsemi and and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “ onsemi ” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as-is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi . “Typical” parameters which may be provided in onsemi data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others.

www.onsemi.com © Semiconductor Components Industries, LLC, 2012 June, 2024 − Rev. 18

1 Publication Order Number:

1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007 This data sheet provides information on subminiature size, axial lead mounted rectifiers for general−purpose low−power applications.

Features

  • Shipped in Plastic Bags, 1000 per bag
  • Available Tape and Reeled, 5000 per reel, by adding a “RL” suffix to the part number
  • Available in Fan−Fold Packaging, 3000 per box, by adding a “FF” suffix to the part number
  • Pb−Free Packages are Available Mechanical Characteristics
  • Case: Epoxy, Molded
  • Weight: 0.4 gram (approximately)
  • Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable
  • Lead and Mounting Surface Temperature for Soldering Purposes: 260°C Max. for 10 Seconds, 1/16 in. from case
  • Polarity: Cathode Indicated by Polarity Band *For additional information on our Pb−Free strategy and soldering details, please download the onsemi Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. CASE 59−10 AXIAL LEAD PLASTIC LEAD MOUNTED RECTIFIERS 50−1000 VOLTS DIFFUSED JUNCTION MARKING DIAGRAM See detailed ordering and shipping information on page 5 of this data sheet.

ORDERING INFORMATION

A = Assembly Location 1N400x = Device Number x = 1, 2, 3, 4, 5, 6 or 7 YY = Year WW = Work Week /C0071 = Pb−Free Package (Note: Microdot may be in either location) A 1N400x YYWW/C0071 /C0071 NOTE: Some of the devices on this data sheet have been DISCONTINUED. Please refer to the table on page 5.

1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007 www.onsemi.com MAXIMUM RATINGS Rating Symbol 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 Unit †Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 50 100 200 400 600 800 1000 V †Non−Repetitive Peak Reverse Voltage (halfwave, single phase, 60 Hz) VRSM 60 120 240 480 720 1000 1200 V †RMS Reverse Voltage VR(RMS) 35 70 140 280 420 560 700 V †Average Rectified Forward Current (single phase, resistive load,

60 Hz, TA = 75°C)

IO 1.0 A †Non−Repetitive Peak Surge Current (surge applied at rated load conditions) IFSM 30 (for 1 cycle) A Operating and Storage Junction Temperature Range TJ Tstg −65 to +150 °C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. †Indicates JEDEC Registered Data THERMAL CHARACTERISTICS Rating Symbol Max Unit Maximum Thermal Resistance, Junction−to−Ambient R/C0113JA Note 1 °C/W ELECTRICAL CHARACTERISTICS† Rating Symbol Typ Max Unit Maximum Instantaneous Forward Voltage Drop, (iF = 1.0 Amp, TJ = 25°C) vF 0.93 1.1 V Maximum Full−Cycle Average Forward Voltage Drop, (IO = 1.0 Amp, TL = 75°C, 1 inch leads) VF(AV) − 0.8 V Maximum Reverse Current (rated DC voltage) (TJ = 25°C) (TJ = 100°C) IR 0.05 1.0 /C0109A Maximum Full−Cycle Average Reverse Current, (IO = 1.0 Amp, TL = 75°C, 1 inch leads) IR(AV) − 30 /C0109A Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. †Indicates JEDEC Registered Data

1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007 www.onsemi.com Lead Length, LMounting Method 1/8 1/4 1/2 Units 67R/C0113JA 65 72 80 87 °C/W °C/W °C/W TYPICAL VALUES FOR R/C0113JA IN STILL AIR Data shown for thermal resistance, junction−to−ambient (R/C0113JA) for the mountings shown is to be used as typical guideline values for preliminary engineering or in case the tie point temperature cannot be measured. NOTE 1. − AMBIENT MOUNTING DATA MOUNTING METHOD 1 MOUNTING METHOD 2 MOUNTING METHOD 3 ÉÉÉÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉÉÉÉ L L ÉÉÉÉÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉÉÉÉÉ L L Vector Pin Mounting ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ L = 3/8 Board Ground Plane P.C. Board with 1−1/2 X 1−1/2 Copper Surface″″

1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007 www.onsemi.com Device Package Shipping† 1N4001G Axial Lead* (Pb−Free)

1000 Units/Bag

1N4001RLG 5000/Tape & Reel 1N4002G 1000 Units/Bag 1N4002RLG 5000/Tape & Reel 1N4003G 1000 Units/Bag 1N4003RLG 5000/Tape & Reel 1N4004G 1000 Units/Bag 1N4004RLG 5000/Tape & Reel 1N4005G 1000 Units/Bag 1N4005RLG 5000/Tape & Reel 1N4006G 1000 Units/Bag 1N4006RLG 5000/Tape & Reel 1N4007G 1000 Units/Bag 1N4007FFG 3000 Units/Box 1N4007RLG 5000/Tape & Reel DISCONTINUED (Note 1) 1N4001 Axial Lead* 1000 Units/Bag 1N4001RL Axial Lead* 5000/Tape & Reel 1N4002 Axial Lead* 1000 Units/Bag 1N4002RL Axial Lead* 5000/Tape & Reel 1N4003 Axial Lead* 1000 Units/Bag 1N4003RL Axial Lead* 5000/Tape & Reel 1N4004 Axial Lead* 1000 Units/Bag 1N4004RL Axial Lead* 5000/Tape & Reel 1N4005 Axial Lead* 1000 Units/Bag 1N4005RL Axial Lead* 5000/Tape & Reel 1N4006 Axial Lead* 1000 Units/Bag 1N4006FFG Axial Lead* (Pb−Free)

3000 Units/Box

1N4006RL Axial Lead* 5000/Tape & Reel 1N4007 Axial Lead* 1000 Units/Bag 1N4007RL Axial Lead* 5000/Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *This package is inherently Pb−Free. 1. DISCONTINUED: These devices are not recommended for new design. Please contact your onsemi representative for information. The most current information on these devices may be available on www.onsemi.com.

A xxx xxx YYWW SCALE 1:1 B DK K F F A DIM MIN MAX MIN MAX MILLIMETERSINCHES A 4.10 5.200.161 0.205 B 2.00 2.700.079 0.106 D 0.71 0.860.028 0.034 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. ALL RULES AND NOTES ASSOCIATED WITH JEDEC DO−41 OUTLINE SHALL APPLY 4. POLARITY DENOTED BY CATHODE BAND. 5. LEAD DIAMETER NOT CONTROLLED WITHIN F DIMENSION. AXIAL LEAD CASE 59−10 ISSUE U DATE 15 FEB 2005 GENERIC MARKING DIAGRAM* xxx = Specific Device Code A = Assembly Location YY = Year WW = Work Week A xxx xxx YYWW STYLE 1: PIN 1. CATHODE (POLARITY BAND) 2. ANODE STYLE 2: NO POLARITY STYLE 1 STYLE 2 STYLE 1 STYLE 2 *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “ /C0071”, may or may not be present. POLARITY INDICATOR OPTIONAL AS NEEDED (SEE STYLES) MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. 98ASB42045BDOCUMENT NUMBER: DESCRIPTION: Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1AXIAL LEAD © Semiconductor Components Industries, LLC, 2019 www.onsemi.com

onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. ADDITIONAL INFORMATION TECHNICAL PUBLICATIONS: Technical Library: www.onsemi.com/design/resources/technical−documentation onsemi Website: www.onsemi.com ONLINE SUPPORT: www.onsemi.com/support For additional information, please contact your local Sales Representative at www.onsemi.com/support/sales