NLAS3257A ONSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
Table 1. MAXIMUM RATINGS should not be assumed, damage may occur and reliability may be affected.
- Measured with minimum pad spacing on an FR4 board, using 10 mm −by−1 inch, 2 ounce copper trace no air flow.
- Tested to EIA/ JESD22 −A114−A
- Tested to EIA/ JESD22 −A115−A
Table 2. RECOMMENDED OPERATING CONDITIONS the Recommended Operating Ranges limits may affect device reliability.
Table 3. DC ELECTRICAL CHARACTERISTICS (Typical: T = 25°C, VCC = 3.3 V) performance may not be indicated by the Electrical Characteristics if operated under different conditions. Table 4. ON RESISTANCE (Typical: T = 25°C)
Table 5. TIMING/FREQUENCY (Typical: T = 25°C, VCC = 3.3 V, RL = 50 /C0087, CL = 5 pF, f = 1 MHz) Table 6. ISOLATION (Typical: T = 25°C, VCC = 3.3 V, RL = 50 /C0087, CL = 5 pF) Table 7. CAPACITANCE (Typical: T = 25°C, VCC = 3.3 V, f = 1 MHz)
the bandwidth of an On switch. VISO, Bandwidth and VONL are independent of the input signal direction. Figure 6. Off Channel Isolation/On Channel Loss (BW)/Crosstalk Specifications Brochure, BRD8011/D.
UDFN6 1x1, 0.35P CASE 517EC ISSUE O DATE 09 NOV 2018 XX = Specific Device Code M = Date Code *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “/C0071”, may or may not be present. Some products may not follow the Generic Marking. GENERIC MARKING DIAGRAM* XXM MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. 98AON00214HDOCUMENT NUMBER: DESCRIPTION: Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1UDFN6 1x1, 0.35P © Semiconductor Components Industries, LLC, 2018 www.onsemi.com
onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com onsemi Website: www.onsemi.com Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative