9850 SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Features

  • Dual-output offers the added functionality of two sensors in a single sensor
  • Sealed integral interface accepts industry-standard Packard Electric METRI-Pack™ connectors
  • Low-profile design answers space-conscious applications
  • Additional mechanical rotation angles available The 9850 Gen II Series offers a highly reliable rotary potentiometer sensor module that can be easily integrated into a wide variety of space-conscious applications requiring installation simplicity, long service life and repeatable accuracy. The 9850 Gen II Series introduces a new, lower profile (15.2mm; maximum connector receptacle height 25.9mm), designed to perform in demanding environments. Manufactured for optimal cost-economies, the 9850 Gen II Series offers simple yet durable design strengths that can lead to significant systems costs savings. Plug-in simplicity and sealed connector contact is assured via an integral right-angle connector receptacle designed to accept industry- standard Packard Electric METRI-Pack™ connectors. This design also eliminates weak/stress points and leaks in exposure to water. Twelve standard models offer a choice of 180° or 120° mechanical rotation with round or slotted mounting holes for optimal installation alignment. Active Electrical Rotation 85° or 130° Single Output (See Fig. 1) 85° Dual Output Total Resistance 5,000 ohms ±20% Linearity Std. ±2.0% over active electrical rotation (See Fig. 1) (Independent) Spec. ±0.5% over active electrical rotation Power Rating At 70°C 0.15 Watts

www.sensata.com Page 2 Copyright © 2018 Sensata Technologies, Inc. INTEGRATES PROPRIETARY THICK FILM ELEMENT & PRECIOUS METAL CONTACT TECHNOLOGY WITH MAXIMUM PACKAGING FLEXIBILITY Mechanical Environmental Mechanical Rotation (Nominal) 120°-180° single; 120° dual (See Table A) Shaft Rotation/Direction (See Table A) Mechanical Life 1,000,000 full cycles 5,000,000 dither cycles Stop Strength 0.68 Nm max. Torque 0.11 Nm max Mounting Torque 1.35 Nm max. Temperature Limits -40°C to +125°C Vibration 15 Gs, 50 to 1,000 Hz Humidity 95% @ 40°C Shock 50 Gs max. 3-Pin (Single Output) 6-Pin (Dual Output) CW/CCWModels available in both Single & Dual Outputs (Dual in 120° only) CW (clockwise) 120° 120° 180° 180° CCW (counter c lockwise) STAR T STAR T

www.sensata.com Page 3 Copyright © 2018 Sensata Technologies, Inc. Models 9851-9858 – Single Output (3-Pin) Fig.1 Table A Fig.2 Mating Connector/Interface Information: Single Output (3-pin) Note: For rotation outside active electrical rotation, linearity may exceed specified tolerances. Sensor mates with Packard Electric METRI-Pack™ Series 150 Connectors Dual Output (6-pin) Models 9861-9864 – Dual Output (6-Pin) Model Mechanical Rotation Active Electrical Rotation Rotation* Direction Mounting1 Hole 9851 120° 85° CW S 9852 120° 85° CCW S 9853 120° 85° CW R 9854 120° 85° CCW R 9855 180° 130° CW S 9856 180° 130° CCW S 9857 180° 130° CW R 9858 180° 130° CCW R Model Mechanical Rotation Active Electrical Rotation Rotation* Direction Mounting1 Hole 9861 120° 85° CW S 9862 120° 85° CCW S 9863 120° 85° CW R 9864 120° 85° CCW R A B C A B C D E F Active Electrical Rotation is 10-90% of total electrical rotation Output Ratio 100% 90% 80% 70% 60% 50% 40% 30% 20% 10% Mechanical Rotation(˚)

Specification No.: 02195-001 Rev.04/12/18 Americas +1 (800) 350 2727 sensors@sensata.com Europe, Middle East & Africa +33 (3) 88 20 8080 position-info.eu@sensata.com Asia Pacific sales.isasia@list.sensata.com China +86 (21) 2306 1500 Japan +81 (45) 277 7117 Korea +82 (31) 601 2004 India +91 (80) 67920890 Rest of Asia +886 (2) 27602006 ext 2808 Page 4 www.sensata.com CONTACT US Copyright © 2017 Sensata Technologies, Inc. Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. Family Standard Resistance Standard Linearity (%) 98XX:9851 9852 9853 9854 9855 9856 9858 9861 9862 9863 9864 R5K L2.0 ORDERING OPTIONS Example : 9855 R5K L2.0 Specifies a model 9855 (180° mechanical rotation, CW rotation direction) single output, 3-Pin Sensor Module with slotted mounting holes, standard resistance 5K ohms ±20%, Linearity ±2%. WARNINGS RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE

  • The product’s side panels may be hot, allow the product to cool before touching
  • Follow proper mounting instructions including torque values
  • Do not allow liquids or foreign objects to enter this product Failure to follow these instructions can result in serious injury, or equipment damage. HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
  • Disconnect all power before installing or working with this equipment
  • Verify all connections and replace all covers before turning on power Failure to follow these instructions will result in death or serious injury.