982-D WECO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 1

Technical content

Screw connection, 2 solder pins per pole 11.11WECO Contact GmbH - www.wecogroup.com ''no flame'' after glow-wire test according to Household Appliance DIN EN/IEC 60335-1 The PCB connector 982-D in 9.52 mm pitch is available in 2- to 26-pole design and can be mounted side-by-side in the nominal pitch. This version is equipped with two solder pins per pole. The conductor terminal is of head contact design, whereby the screws and square washers are movably connected. For easier connection, the non-rotably mounted square washers are automatically lifted when the screw is loosened. Part Numbers No. of poles 982-D Length Pcs 2 20.873.702 19,00 200 3 20.873.703 28,60 250 4 20.873.704 38,10 100 5 20.873.705 47,60 50 6 20.873.706 57,10 50 7 20.873.707 66,60 50 8 20.873.708 76,20 50 9 20.873.709 85,70 50 10 20.873.710 95,20 50 11 20.873.711 104,70 50 12 20.873.712 114,30 50 13 20.873.713 123,80 50 14 20.873.714 133,30 25 15 20.873.715 142,80 25 16 20.873.716 152,30 25 17 20.873.717 161,90 25 18 20.873.718 171,40 25 19 20.873.719 180,90 25 20 20.873.720 190,40 25 21 20.873.721 199,90 25 22 20.873.722 209,50 25 23 20.873.723 219,00 25 24 20.873.724 228,50 25 25 20.873.725 238,00 20 26 20.873.726 247,60 20 General Information Pitch 9,52 mm No. of poles 2 - 26 Technical Data Clamping Range solid / flexible / AWG 0,75 - 2,5 mm² / 0,75 - 2,5 mm² / 18 - 12 AWG Rated Cross Section 2,5 mm² Wire Stripping Length 8,5 mm Overvoltage Category III Pollution Severity Level 3 Rated Voltage 320 V Rated Impulse Voltage 4 kV Rated Insulation Voltage 450 V acc. to EN 60998-1 Rated Current 24 A at 30°C ambient temperature Hole in PCB ø 1,6 mm Torque 0,8 Nm Other specifications Per pole two conductors of identical cross-section can be connected. Material Moulding PA, grey, V-0 Comparative Tracking Index CTI ≥ 600 Insulating Group I Temperature Range -40°C up to 100°C Pressure clamp Tin plated brass Screw M3,5; zinc plated steel, blue passivated Solder pin 0,8 x 1,0 mm; tin plated brass Approvals Current Voltage Group AWG Nm 20 300 B 20 - 12 0,79 300 300 B D, E 20 - 12 20 - 12 0,79 0,79 Options / Accessories

  • Consecutive numbering
  • Special marking according to drawing
  • Crosshead screws
  • Cover cap 982-A
  • Securing pins BEF-983
  • Tab connections
  • 10 mm pin length