9826-PSM0 3M | Alldatasheet

Document overview

  • Manufacturer or author: a0axxzz
  • PDF pages: 4

Technical content

http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Shielded Controlled Impedance (SCI) .100″ Assembly Hardware Physical *RoHS = Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment "RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead , mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M. Insulation Material:

2 Row: Polycarbonate

3 Row: Glass Reinforced Polyester

Color: Black Flammability: UL 94V-0 Marking: 3M Logo TS-0802-08 Sheet 1 of 3

2 Row Carrier Housing

  • Carriers available in 3M .100 ″ × .100″ Socket
  • Compatible with 3M .100 ″ × .100″ Headers
  • Available in short or long latch styles

3 Row Carrier Housing

  • Integral locking feature
  • Includes two retention clips

2 Pin Header Latch

  • Available for the right angle SCI connector
  • R o H S * c o m p l i a n t Date Modified: August 10, 2006

http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Shielded Controlled Impedance (SCI) .100″ Assembly Hardware Contact Quantity Dimension A Dimension B Dimension C Dimension D TS-0802-08 Sheet 2 of 3 .0 .00 .000 [ ] Dimensions for Reference Onl y Tolerance Unless Noted [m m ] Inch

Ordering Information

Notes: 1. Polarizing groove omitted for N = 6, N = 8. 2. Polarizing groove omitted for N = 6, N = 8, N = 10, N = 12, N = 14. 3. The “Normal” Retention Style is illustrated. For the “Reverse” Retention Style the Cable Assembly Retainer is flipped 180° end to end, and the “Signal” and “Ground” rows of contact are also reversed. 98XX-XXXX Contact Qty See Table 1 Carrier Style PS = Centerbump, Short Latches NS = No Centerbump, Short Latches PL = Centerbump, Long Latches NL = No Centerbump, Long Latches M0 = Normal MR = Reverse *Tooled sizes D + .000 .710 [18.03] .420 [10.67] .256 [ 6.50] Row of Ground Contacts See Note 1 .565 [14.35] .100 [2.54] .100 [2.54] .210 [5.33] .240 [6.10] Centerbump (optional) Short Latch Shown Long Latch Shown See Note 2 .067 [ 1.70 ] C + .000 B + .000 Cable Assembly Retainer (See Note 3) Row if Signal Contacts (See Note 3) - .008 - .008 - .008 A ± .004

http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Shielded Controlled Impedance (SCI) .100″ Assembly Hardware TS-0802-08 Sheet 3 of 3 3 x 7 Carrier Housing Note: 1. Pin Strip Latch is for use with right angle SCI only. .0 .00 .000 [ ] Dimensions for Reference Onl y Tolerance Unless Noted [m m ] Inch A [18.94] [7.00] [16.00] [27.00] A 13 5 7 .335 [8.50] [1.00] .100 Ref [2.54] Retention Clips (2 required) .492 [12.50] + .000 + .000 [1.00] - .004 - .004 1.063 ± .020 .039 ± .004 .746 ± .004 .276 ± .004 .630 ± .008 .039 ± .004 Section A-A Pin Strip with Latch See Note 1 .235 [5.97] .112 [2.84] .094 .100 [2.54] .477 [12.12] .689 [17.50] .100 [2.54] .224 [5.69] .094 [2.39] .025 Sq Pin [0.64]

Printed in USA. Minimum 10% Post-Consumer Fiber Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3M Electronics 6801 River Place Blvd. Austin, TX 78726-9000 800/225-5373 www.3M.com/electronics © 3M 2006