974-BP WECO | Alldatasheet
Document overview
- Manufacturer or author: WECO Contact GmbH
- PDF pages: 1
Technical content
974-BP(-DS)PCB connector Screw connection 45°-angle to PCB, with base plate 11.17 MATERIAL Moulding PA, grey, V-0 Comparative Tracking Index CTI ≥ 600 Insulating Group I Temperature Range -40°C up to 100°C Terminal body Tin plated brass Screw M3; zinc plated steel, clear passivated Solder pin ø 1 mm; tin plated copper Wire protector Tin plated tin bronze OPTIONS / ACCESSORIES Consecutive numbering Special marking according to drawing Self-adhesive marking strip BST-5,00 [1] Acc. to IEC 60947-7-4 und IEC 60947-1 CONFIGURATIONS Poles Part number Article number Part number Article number Length (L) Packaging PU 2 974-BP/02 974-BP-DS/02 97.874.002 10,00 mm Box 250 further number of poles on request GENERAL INFORMATION Pitch 5 mm No. of poles 2 - 12 TECHNICAL DATA Clamping Range solid / stranded / AWG without wire protector 1 - 6 mm² / 1 - 2,5 mm² / 16 - 12 AWG with wire protector 0,75 - 4 mm² / 0,75 - 2,5 mm² / 18 - 12 AWG Rated Cross Section 2,5 mm² Wire Stripping Length 6,5 mm ± 0,5 mm Overvoltage Category III III II Pollution Severity Level 3 2 2 Rated Voltage 250 V 320 V 630 V Rated Impulse Voltage 4 kV 4 kV 4 kV Rated Current 15 A Hole in PCB ø 1,3 mm Torque 0,5 Nm APPROVALS Current [A] Voltage [V] mm² 24 250 2,5 [1] Kirkland, Québec, Canada, H9J 4A1 weco@wecoconnectors.com © Copyright by WECO All rights reserved.WECO® is a brand of the WECO Group. Information provided in this document may be changed without prior notice. Please refer to our website for the full disclaimer.