DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

■ Virtually infi nite electrical circuit isolation ■ Sealed for board wash ■ Metal or plastic shaft options ■ RoHS compliant* Model 96 - 5/8 ” Square Sealed Single-Turn Panel Control *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifi cations are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specifi c applications. Initial Electrical Characteristics1 Conductive Plastic Element Cermet Element Standard Resistance Range Dielectric Withstanding Voltage (MIL-STD-202, Method 301) Power Rating (Voltage Limited By Power Dissipation or 350 VAC, Whichever Is Less) Environmental Characteristics Temperature Coeffi cient Over Storage (whichever is greater) (Audio tapers) ±20 % maximum Contact Resistance Variation Moisture Resistance (MIL-STD-202, Method 103, Condition B) (Audio tapers) ±20 % TRS maximum *RoHS COMPLIANT

Model 96 PC Pin Terminals, In-Line 120 ° ± 5 ° STD. FLAT ORIENTATION (SHAFT AT CCW END)1 3 CCW POTENTIOMETER Shaft Flat Orientation DIA. 13.72 ± 0.38 (.540 ± .015) 15.88 (.625) 12.95 ± .203 (.510 ± .008) MOUNTING SURFACE L 0.76 ± 0.05 (.030 ± .002) TYP. BACK VIEW 2.54 (.100) 2.54 (.100) 0.79 ± .025 (.031 ± .010) 1.19 (.047) “A” STYLE A.R. LUG R 1.37 ± 0.08 (.054 ± .003) 2.36 ± 0.08 (.093 ± .003) 7.92 (.312) 9.53 (.375) 15.29 ± 0.56 (.602 ± .022) SEE HOW TO ORDER CHART FOR BUSHING OPTIONS. SEE NEXT PAGE FOR SHAFT OPTIONS. 11.05 ± 0.20 (.435 ± .008) TOLERANCES EXCEPT AS SHOWN: DECIMAL .XXX ± (.015 )FRACTION ± 1/64 .XX ± (.38) ANGLE ±5 ° .381 9.65 Specifi cations are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specifi c applications. Mechanical Characteristics1 Torque Running Torque Maximum temperature 399 °C (750 °F) for 3 seconds. Immersion wash is not recommended. NOTE: Performance specifi cations do not apply to units subjected to printed circuit board immersion cleaning processes. 1 At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted. Product Dimensions Model 96 - 5/8 ” Square Sealed Single-Turn Panel Control DIMENSIONS: MM (INCHES)

Specifi cations are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specifi c applications. Model 96 - 5/8 ” Square Sealed Single-Turn Panel Control Product Dimensions Plastic Shaft Styles 1.60+.38/-.00 (.063+.015/-.000) 11.18 ± .38 (.440 ± .015) 1.60+.38/-.00 (.063+.015/-.000) 1.80 ± 0.25 (.059 ± .010) “F” ± .38 (“F” ± .015) 6.32+.000/-.152 (.249+.000/.006) DIA. 6.30+.000/-.152 (.248+.000/.006) DIA. 5.49 (.216) 6.32+.010/-.025 DIA. 1.194 (.047) 5.486 ± .051 (.216 ± .002) 1.19 (.047) 6.31+.025/-.051 (.2485+.001/.002) DIA. 14.27 ± .25 (0.07 ± .001) 1.00 (.04) 1.50 ± .25 (0.06 ± .001) 3.16+.00/-.15

48 TOOTH

(.236 +.000/-.002) DIA. DIA. (.157 +.000/-.002) SHAFT TYPE "B" (USES BUSHING A) SHAFT TYPE "D" (USES BUSHING C) SHAFT TYPE "T" (USES BUSHING U) SHAFT TYPE "C" (USES BUSHING A) SHAFT TYPE "R" (USES BUSHING R) SHAFT TYPE "W" (USES BUSHING A) SHAFT TYPE "A" (USES BUSHING A) SHAFT TYPE "H" (USES BUSHING A) SHAFT TYPE "V" (USES BUSHING U) SHAFT TYPE "G" (USES BUSHING A) SHAFT TYPE "J" (USES BUSHING R) TOLERANCES EXCEPT AS SHOWN: .XX = ± .79 (0.03) STD. LENGTHS: 25.40 (1.00) .02 (.050) .XXX = ± .005 (.127) .XXXX = ± .0005 (.0127) 6.32+.010/-.025 DIA 6.32+.010/-.025 DIA 1.00 ± 0.13 (.039 ± .054) 6.00+.000/-.035 DIA 12.70 (.500) 15.88 (.625) 19.05 (.750) 22.23 (.875) 25.4 (1.000) 16.0 (.630) 22.0 (.866) Metal Shaft Styles 0.79 ± 0.13 (.031 ± .054) 3.99+.000/-.035 DIA STD. LENGTHS: STD. LENGTHS: STD. LENGTHS: 12.70 (.500) 15.88 (.625) 19.05 (.750) 22.23 (.875) STD. LENGTHS: 19.05 (.750) 22.23 (.875) 12.70 (.500) 15.88 (.625) 19.05 (.750) STD. LENGTHS: 12.70 (.500) 15.88 (.625) 19.05 (.750) 22.23 (.875) STD. LENGTHS: 16.0 (.630) 22.0 (.866) STD. LENGTHS: 16.0 (.630) 22.0 (.866) STD. LENGTHS: STD. LENGTHS: 19.05 (.750) 22.23 (.875) “F” ± .381 (“F” ± .015) 3.988 ± .076 (.157 ± .003) SHAFT TYPE "S" (USES BUSHING R) 6.000+.000/-.035 DIA 0.79 ± 0.25 (.031 ± .010) SHAFT TYPE "E" (USES BUSHING C) 0.79 (.031) 3.16 (.1245) DIA 12.0 (.500) 16.0 (.625) 19.0 (.750) STD. LENGTHS: STD. LENGTHS: 16.0 (.630) 22.0 (.866) STD. LENGTHS: 16.0 (.630) 22.0 (.866) 7.95 (.313) 11.13 (.438) FLAT LENGTH “F”: 6.99 (.275) 12.98 (.511) FLAT LENGTH “F”: DIMENSIONS: MM (INCHES)

Specifi cations are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specifi c applications. How to Order Model 96 Panel Controls REV. 05/13 9 6 A 1 A - A 2 8 - A 1 5 L ELEMENT TAPER RESISTANCE CODE TYPE/TOLERANCE VALUE IN OHMS (A) Linear Cermet ±10 % (05) - 100 (30) - 15 K (H) Linear Cermet ±5 % (28) - 150 (16) - 20 K (15) - 10 K (B) Linear C-P ±20 % (10) - 1 K (18) - 50 K (15) - 10 K (23) - 500 K (17) - 25 K (C) CW Audio Cermet ±10 % (10) - 1 K (18) - 50 K (D) CW Audio C-P ±20 % (12) - 2.5 K (20) - 100 K (F) CCW Audio Cermet ±10 % (13) - 5 K (22) - 250 K (G) CCW Audio C-P ±20 % (15) - 10 K (23) - 500 K (S) CW Audio C-P ±10 % (17) - 25 K (25) - 1 M (T) CCW Audio C-P ± 10 % AVAILABLE ONLY IN SHAFT TYPE LENGTHS BUSHINGS (CODE) (CODE) B Plastic Single Slotted 1/4 " (6.35 mm) D 16, 20, 24, 28 A C Plastic Single Flatted 1/4" (6.35 mm) D 24, 28 A D Plastic Single Plain 1/8" (3.18 mm) D 16, 20, 24 C R Plastic Single Slotted 6 mm D Metric 16,22 R T Plastic Single Slotted 4 mm D Metric 16, 22 U W Plastic Single Knurled 1/4" (6.35 mm) D 32 A A Metal Single Plain 1/4" (6.35 mm) D 16, 20, 24 A E Metal Single Slotted 1/8" (3.18 mm) D 16, 20, 24 C G Metal Single Slotted 1/4" (6.35 mm) D 16, 20, 24, 28 A H Metal Single Flatted 1/4" (6.35 mm) D 24, 28 A J Metal Single Slotted 6 mm D Metric16, 22 R S Metal Single Flatted 6 mm D Metric 16, 22 R V Metal Single Slotted 4 mm D Metric 16, 22 U A Metal Plain 3/8 ” (9.53 mm) D x 3/8 ” (9.53 mm) L C Metal Plain 1/4 ” (6.35 mm) D x 1/4 ” (6.35 mm) L R Metal Plain 10 mm D x 9 mm L U Metal Plain 7 mm D x 9 mm L MODEL

96 Single-Turn, In-Line PC Pins, Sealed

# SECTIONS/nobreakspace/nobreakspace/nobreakspace/nobreakspace

1 Single

A Single .305 ” (7.8 mm) R, 90 °CW D No Lug ANTI-ROTATION LUG RoHS IDENTIFIER CompliantL Boldface features are Bourns standard options. All others are available with higher minimum order quantities. SHAFT AVAILABLE LENGTH ONLY IN (FMS) BUSHING Code Description Code 16 1/2 ”L A, C 20 5/8 ”L A, C 24 3/4 ”L A, C 28 7/8 ”L A 32 1 ”L A METRIC 16 16 mmL R, U 22 22 mmL R, U