WISE-4610_V02 ADVANTECH | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Features

ƒ Private LoRa and LoRaWAN selectable ƒ Longer communication range ƒ Better penetration through concrete and steel ƒ Less interference than 2.4GHz spectrum ƒ Application-ready I/O combination with IP65 enclosure ƒ Powered by solar rechargeable battery or 10~50VDC input ƒ GPS/Galileo/BeiDou/GLONASS support Introduction LPWAN is a type of wireless telecommunication wide area network designed to allow long range communications at a low data rate among IoT applications, such as sensors operated on a battery. Its benefits is to offer multi-year battery lifetime for sensors/ applications to send small amounts of data over long distances a few times per hour suitable for different environments. Private LoRa and LoRaWAN are one of category of LPWAN which belong to the non-cellular LPWAN wireless communication network protocols enables very long range transmissions with low power consumption, operating in the non-licensed spectrum. Star Topology The LoRaWAN networks in a star topology have gateway relaying the data between the sensor nodes and the network server. Communication between the sensor nodes and the gateway goes over the wireless channel utilizing the LoRa physical layer, whilst the connection between the gateways and the central server are handled over a backbone IP-based network. The LoRaWAN end nodes(sensors) typically use Low Power and are battery powered (Class A and Class C). LoRa embedded sensors that run on batteries that lasts from 2–5 years typically. The LoRa sensors can transmit signals over distances from 1km — 10km. Advanced Industrial LoRa/LoRaWAN Wireless I/O Module Common Specification Wireless Communication ƒ Standard LoRaWAN or Private LoRa ƒ Frequency Band EU 863-870 (MHz) / US 902-928 (MHz) / AU 915-928 (MHz) / AS 919-924 (MHz) / JP 920-928 (MHz) ƒ Spreading Factor 7~12 ƒ Outdoor Range 15Km (L.o.S) by pairing with WISE-6610 (with 2 dBi Antenna) ƒ Transmit Power Up to +18dBm ƒ Receiver Sensitivity Up to -136dBm at SF = 12 / 125KHz ƒ Data Rate 50 kbps at FSK mode EU868 21.9 kbps at SF7 mode US915 5.47 kbps at SF7 mode JP923 ƒ Topology Star ƒ Function End Node ƒ Antenna Type External GPS (Only Supported on WISE-4610P) ƒ GNSS Systems GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS signals ƒ Max. Update Rate Single GNSS: up to 18 Hz Concurrent GNSS: up to 10 Hz ƒ Accuracy Position: 2.5 m CEP (50% confidence) With SBAS: 2.0 m CEP (50% confidence) ƒ Acquisition Cold starts: 57 s Aided starts: 7 s ƒ Antenna Type Internal All product specifications are subject to change without notice. Last updated: 7-Jul-2021

www.advantech.com/productsOnline Download WISE-4610 ƒ RTD Types and Temperature Ranges Pt 100 RTD RTD 100 (a = 0.00385) -200°C to 600°C RTD 100 (a = 0.00392) -200°C to 600°C Pt 1000 RTD Pt -40°C to 160°C ƒ Accuracy ±0.1% FSR ƒ CMR @ 50/60 Hz 90 dB ƒ NMR @ 50/60 Hz 60 dB ƒ Span Drift ± 100 ppm/°C WISE-S617 (2AI/2DI/1DO/1RS-485) Digital Input ƒ Channel 2 ƒ Logic Level (Dry Contact) 0: Open 1: Close to DI COM ƒ Non-isolation ƒ Supports 32-bit counter input function (maximum signal frequency: 200 Hz) ƒ Supports keep/discard counter value when power OFF ƒ Supports frequency input function (maximum signal frequency: 200 Hz) ƒ Supports inverted digital input status Analog Input ƒ Channels 2 ƒ Resolution 16 bit ƒ Sampling Rate 1 Hz per channel ƒ Accuracy ±0.1% of FSR (Voltage) ±0.2% of FSR (Current) ƒ Input Range ±1 V, ±5V, ±10V, 0 ~ 1V, 0 ~ 5V, 0 ~ 10V, 0 ~ 20mA, 4 ~ 20mA, ±20mA ƒ Input Impedance > 2M Ω (Voltage) 120 Ω (External Resistor for Current) ƒ Isolation Voltage 2000 VRMS ƒ Common Mode Voltage 350 VDC ƒ Drift Unipolar ±100ppm Bipolar ±50ppm ƒ Burn-Out Detection Yes (4 ~ 20mA only) ƒ Supports data scaling and averaging Digital Output ƒ Channel 1 (Sink Type) ƒ Non-isolation ƒ Output Current 100mA COM Port ƒ Port Type RS-485 ƒ Baud Rate (bps) 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 ƒ Data Bits 7, 8 ƒ Stop Bits 1, 2 ƒ Parity None, Odd, Even ƒ Flow Control Auto flow control ƒ Signals DATA+ and DATA- ƒ Protection 15 kV ESD ƒ Supported Protocols Modbus/RTU (Up to 32 addresses with a maximum of 8 instructions) General ƒ Power Input WISE-4610P Built-in 4100mAh Lithium rechargeable battery pack 10~50VDC external power 17-50VDC Solar Panel WISE-4610 10~50VDC external power ƒ Battery Life 6 months (1 hour data update and 1 day GPS update) ƒ Configuration Interface Micro-B USB ƒ LED Indicator Status, Error, Tx, Rx, Battery/Signal Level ƒ Mounting DIN 35 rail, wall, pole, and stack ƒ Dimension (W x H x D) 82 x 122 x 49 mm (without antenna) Operating Temperature ƒ With rechargeable battery 0 ~ 60 °C (32 ~ 140 °F) ƒ Without battery -25 ~ 70 °C (-13 ~ 158 °F) Storage Temperature ƒ With rechargeable battery -20 ~ 60 °C (-4 ~ 140 °F) ƒ Without battery -40 ~ 85 °C (-40 ~ 185 °F) ƒ Operating Humidity 5 ~ 95% RH (non-condensing) ƒ Storage Humidity 0 ~ 95% RH (non-condensing) WISE-S614 (4AI/4DI) Analog Input ƒ Channels 4 ƒ Resolution 16-bit ƒ Sampling Rate 1Hz per channel ƒ Accuracy ±0.1% of FSR (Voltage) ±0.2% of FSR (Current) ƒ Input Range ±150mV, ±500mV, ±1 V, ±5V, ±10V, 0 ~ 150mV, 0 ~ 500mV, 0 ~ 1V, 0 ~ 5V, 0 ~ 10V, 0 ~ 20mA, 4 ~ 20mA , ±20mA ƒ Input Impedance > 2M Ω (Voltage) 240 Ω (External resistor for current) ƒ Isolation Voltage 2000 VDC ƒ Common Mode Voltage 350 VDC ƒ Drift Unipolar ±100ppm Bipolar ±50ppm ƒ Burn-out Detection Yes (4~20mA only) ƒ Supports Data Scaling and Averaging Digital Input ƒ Channels 4 ƒ Input Type Dry Contact (Wet Contact by request) ƒ Logic Level 0: Open 1: Close to DI COM ƒ Supports 200Hz Counter Input (32-bit + 1-bit overflow) ƒ Keep/Discard Counter Value when Power-off ƒ Supports Inverted DI Status WISE-S615 (4 RTD) Analog Input ƒ Channels 4 differential ƒ Input Connections 2, 3-wire ƒ Input Impedance 10 MΩ ƒ Resolution 15 bits ƒ Sampling Rate 1 Sample/s (MAX)

Wireless IoT Sensing Devices WISE-4610 Model Name M12 Cable WISE-S614 WISE-S615 WISE-S617 WISE-S672 Pin Number P/N 4Pin : 1700028162-01 8Pin : 1700028163-01 WISE-S614-A WISE-S615-A WISE-S617-A WISE-S672-A A

1 White DI0 RTD0+ AI0+ DI0

2 Brown DI1 RTD0- AI0- DI1

3 Green DI2 RTD0 COM +12V Out0 DI2

4 Yellow DI3 NC +12V Out GND DI3

5 Gray NC RTD1+ AI1+ DI4

6 Pink NC RTD1- AI1- DI5

7 Blue NC RTD1 COM +12V Out1 NC

8 Red DI COM NC +12V Out GND DI COM

B

1 White AI0+ RTD2+ DI0 RS-485 D1-

2 Brown AI0- RTD2- DI1 RS-485 D1+

3 Green AI1+ RTD2 COM DI COM RS-232 TX

4 Yellow AI1- NC DO0 RS-232 RX

5 Gray AI2+ RTD3+ DO GND RS-485 D2-

6 Pink AI2- RTD3- RS-485 D+ RS-485 D2+

7 Blue AI3+ RTD3 COM RS-485 D- NC

8 Red AI3- NC RS-485 GND RS-232 GND

1 Brown +VS +VS +VS +VS

2 White -VS -VS -VS -VS/ SP-

3 Blue SP+ SP+ SP+ SP+

4 Black SP- SP- SP- NC

Unit: mmDimensions WISE-S672 (6DI/1RS-485/1RS-485 or RS-232) COM Port ƒ Port Number 2 ƒ Type COM1: RS-485 COM1: RS-485/232 ƒ Serial Signal RS-485: DATA+, DATA- RS-232: Tx, Rx, GND ƒ Data Bits 7, 8 ƒ Stop Bits 1, 2 ƒ Parity None, Odd, Even ƒ Baud Rate (bps) 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 ƒ Protection 15 kV ESD ƒ Protocol Modbus/RTU (Total 32 address) Digital Input ƒ Channels 6 ƒ Input Type Dry Contact ƒ Logic Level 0: Open 1: Close to DI COM ƒ Supports 200Hz Counter Input (32-bit + 1-bit overflow) ƒ Keep/Discard Counter Value when Power-off ƒ Supports Inverted DI Status

Ordering Information

WISE-4610 Advanced Industrial LoRaWAN Module ƒ WISE-4610-NA Advanced Industrial LoRaWAN Module - NA915 Firmware Image (Optional) 96634610J00 WISE-4610 JA Patch 96634610T00 WISE-4610 TA AS923 Patch 96634610Z00 WISE-4610 ZA Patch ƒ WISE-4610-EA Advanced Industrial LoRaWAN Module - EU868 ƒ WISE-4610P-NA Advanced Industrial LoRaWAN I/O Module w/ GPS & battery - NA915 Firmware Image (Optional) 96634610J00 WISE-4610 JA Patch 96634610T00 WISE-4610 TA AS923 Patch 96634610Z00 WISE-4610 ZA Patch ƒ WISE-4610P-EA Advanced Industrial LoRaWAN I/O Module w/ GPS & battery - EU868 WISE-S600 IP65 I/O Module with M12 Connectors ƒ WISE-S614-A 4AI/4DI ƒ WISE-S615-A 4RTD ƒ WISE-S617-A 2AI/2DI/1DO/1RS-485 w/ 2ch 12VDC power output ƒ WISE-S672-A 6DI/1RS-485/1RS-485 or RS-232 WISE-S600T I/O Module with Terminal Block ƒ WISE-S614T-A 4AI/4DI ƒ WISE-S615T-A 4RTD ƒ WISE-S617T-A 2AI/2DI/1DO/1RS-485 w/ 2ch 12VDC power output Accessories ƒ 1654011516-01 M12, A-code, 8 Pin, Male ƒ 1655005903-01 M12, A-code, 4 Pin, Female ƒ 1700028162-01 M12, A-code, 4 pin, Female with 1M cable ƒ 1700028163-01 M12, A-code, 8 Pin, Male with 1M cable ƒ PWR-242-AE DIN Rail Power Supply (2.1A Output Current) ƒ PWR-244-AE Panel Mount Power Supply (4.2A Output Current)