9633NA APEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 8

Technical content

B2-34 APEM www.apem.com 9000 series Momentary pushbutton switches Distinctive features and specifications MATERIALS

  • Case : thermoplastique UL94-V0
  • Actuator : polyamide, glass filled
  • Bushing : brass, nickel plated
  • Contacts : A : silver CD : brass, gold plated
  • Terminal seal : epoxy ELECTRICAL SPECIFICATIONS
  • Max. current/voltage rating with resistive load : - silver contact (A) : 1A 30VDC - gold plated contacts (CD) : 100mA 30VDC
  • Initial contact resistance : 50 mΩ max.
  • Insulation resistance : 1.000 MΩ min. at 500VDC
  • Dielectric strength : 1.000 Vrms 50 Hz min. between terminals 1.500 Vrms 50 Hz min. between terminals and frame
  • Electrical life : 250.000 cycles GENERAL SPECIFICATIONS
  • Total travel :
  • Torque : 1,25 Nm (.922 Ft.lb) max. applied to nut
  • Operating temperature : -30°C to +65°C 9600-9400-9400Y 9600N-9400N Functions 3 and 5 Function 2 Function 3 1,3 mm 2 mm 0,9 mm ❑ Two case lengths ❑ Three electrical functions ❑ Sealing options ❑ Model X1146 with Ø 16 (.630) bushing 08-Serie 9400-9600-A_11-Serie 9400-9600-A 21/11/12 15:02 Page34

APEM www.apem.com B2-35 9000 series Momentary pushbutton switches Overview SERIES Terminals, case and bushing Case length 11,2 (.440) All models have Ø 6,35 (1/4) threaded bushing.

4 Straight PC terminals

6 Solder lug terminals

4..Y Straight PC terminals, bracket mounting Case length 8,5 (.334) 4..N Straight PC terminals 6..N Solder lug terminals 6..NZ1 Quick-connect terminals Number of poles

3 Single pole

2 Normally closed (NC)

3 Normally open (NO)

5 Combined (NC/NO)

On the following pages, you will find successively : - model structure of switches - their options in the same order as in above chart Dimensions : first dimensions are in mm while inches are shown as bracketed numbers. NOTICE : please note that not all combinations of above numbers are available. Refer to the following pages for further information. Sealing B Epoxy sealed terminals (standard) KB Front panel sealing by two O-rings - not available with 9400Y. Contact materials A Silver CD Brass, gold plated Caps U900 Ø 5 (.196) U1140 Ø 8 (.314) U1720 Ø 9,4 (.370) U480 Ø 10 (.393) standard U630 Ø 15 (.590) U2430 Square - Height 4 (.157) U2020 Square - Height 6 (.236) Sealing boots are available to protect the switches against dust and water. They are presented in section H. Mounting accessories : standard hardware supplied with all switches : 2 hex nuts 8 mm (.314) across flats and 1 lockwasher. Standard and special hardware available are presented in section I. Packaging unit : 50 pieces, except for 9400Y (25 pieces) Special options X1146 Bushing Ø 16 (.630) X601 Special contact, lower rating 08-Serie 9400-9600-A_11-Serie 9400-9600-A 21/11/12 15:02 Page35

B2-36 APEM www.apem.com 9000 series Momentary pushbutton switches 9600 - 9400 - 9400Y Straight PC terminals - case length 11,2 (.440) : 9400 Bracket mounting - case length 11,2 (.440) : 9400Y Solder lug terminals - case length 11,2 (.440) : 9600 MODEL STRUCTURE Function 2 Function 3 Function 5 (NC) (NO) (combined) 9432YB Normally Closed 9433YB Normally Open 9435YB Combined function 9432B Normally Closed 9433B Normally Open 9435B Combined function

  • Single pole
  • Solder lug or straight PC terminals
  • Epoxy sealed terminals 9632B Normally Closed 9635B Combined function For Normally Open (function 3), see next page. (.204) (.078) (.047) 5.20 1.20 2.00 (.059) 1.50 (.179) (.204) (.039) 4.55 5.20 1.00 The bracket is not fastened to the switch. 1.20 2.80 (.047) (.110) 8.70 2.40 (.342) (.094) 9600Z1 9600 9400 (.157 DIA) (.275) (.078) (.200) (1/4-40UNS) (.393 DIA) (.354 DIA) (.236) 6.007.00 Ø4.00 2.00 Ø6.35-40UNS Ø10.00 Ø9.00 5.08 (.440)(.204) 5.20 11.20 (.015) 0.40 NONO NC EPOXY Ø9.00 Ø10.00 Ø6.35-40UNS Ø4.00 11.854.55 7.00 6.00 (.236) (.354 DIA) (.393 DIA) (1/4-40UNS) (.179) (.466) (.275) (.157 DIA) (.039) 1.00 0.40 (.015) 5.08 (.200) 5.08 (.200) 5.08 (.200) (.200) 5.08 (.062 DIA) Ø1.60 NO NC NOEPOXY F5F2 NC EPOXY NO 5.08 (.200) (.015) 0.40 0.40 (.015) Ø10.00 (.393 DIA) 3.18 Ø1.60 3.18 15.758.20 3.18 1.17 15.75 5.08 15.75 5.08 13.004.10 6.60 (.200) (.125) (.620) (.062 DIA) (.200) (.620) (.125) (.322) (.620) (.046) (.125) (.259) (.161) (.511) 5.08 Ø6.35-40UNS Ø4.00 6.00 (.236) (1/4-40UNS) (.200) (.157 DIA) NO 08-Serie 9400-9600-A_11-Serie 9400-9600-A 21/11/12 15:02 Page36

APEM www.apem.com B2-37 9000 series Momentary pushbutton switches 9600N - 9400N Solder lug terminals - case length 8,5 (.334) : 9600N 9633NB Normally Open Straight PC terminals - case length 8,5 (.334) : 9400N 9433NB Normally Open PANEL CUT-OUT Ø6.50 (.255 DIA) Bushing Ø 16 (.630) - metal button : 9633•X1146 Silver contacts 9633AX1146 Normally open Gold plated silver contacts 9633ADX1146 Normally open (.748) (.472DIA) (.629DIAx1.00IS) (.078) (.015) (.200) (.118)(.204) (.059) (.374) (.291) (.129) 0.40 5.08 19.00 Ø12.00 2.00 Ø16.00x1.00SI 3.005.20 3.30 7.40 1.50 9.50 Ø18.00 (.708DIA) Panel cut-out : Ø 16,2 (.637) Max. current/voltage rating. : 1A 30VDC Epoxy sealed terminals. Options of the following pages not applicable. Hex nut 19 (.748) across flats Also available with quick-connect terminals 2,8 x 0,5 mm : 9633NZ1 (.157 DIA) (.236) (.275) (.200) (1/4-40UNS) (.374 DIA) (.059) (.078) 6.00 7.00 1.50 5.08 Ø4.00 Ø6.35-40UNS Ø9.50 2.00 (.334 DIA) Ø8.50 (.334)(.196) 5.00 8.50 (.015)

0.40 EPOXY

Ø9.50 Ø6.35-40UNSØ4.00 3.50 10.00 7.00 6.00 (.374 DIA) (1/4-40UNS) (.137) (.393) (.275) (.236) (.157 DIA) (.039) (.059) (.200) (.062 DIA) Ø1.60 5.08 1.50 1.00 (.334 DIA) Ø8.50 (.015) 5.08 (.200) 08-Serie 9400-9600-A_11-Serie 9400-9600-A 21/11/12 15:02 Page37

B2-38 APEM www.apem.com 9000 series Momentary pushbutton switches CONTACT MATERIALS A Silver CD Brass, gold plated Special contact, lower rating : see X601 under "Special options". B Epoxy sealed terminals (standard) KB Combined sealings Epoxy sealed terminals + front panel sealing by two O-rings. Protects the switch against water and dust. Panel seal withstands 0,1 bar pressure. Sealing boots : see section H. X601 Silver plated brass contacts Current/voltage rating for an electrical life of 20.000 cycles : 0,5A 30VDC. Minimum quantity : 5.000 pieces per model and shipment. X1146 Model with dia. 16 (.630) bushing and metal plunger See previous page. SEALING SPECIAL OPTIONS ➀ O-rings K (.216 MAX)

5.50 Maxi

Option KB not available on 9400Y model. 08-Serie 9400-9600-A_11-Serie 9400-9600-A 21/11/12 15:02 Page38

APEM www.apem.com B2-39 9000 series Momentary pushbutton switches DRESS NUTS U1636 U840 U825 For cap U1140 For cap U480 For cap U630 Chrome plated. Order separately. CAPS + U... U900 U1140 U1720 U480 U630 U2020U2430 Cap colours Replace last "0" by number 1 blue 1/4 dark blue 2 black 3 green 4 grey 5 yellow 6 red 7 ivory 7/1 white 9 orange Standard Square Square (.157) (.196) (.129) 4.00 3.30 Ø5.00 (.118) (.393) (.295) Ø10.00 7.50 3.00 (.452 SQ) (.157) (.196) 4.00 3.00 11.50x11.50 (.322 DIA) (.500 DIA) (1/4-40UNS) (.322) (.244) Ø12.70 Ø8.20 6.20 8.20 Ø6.35-40UNS (.413 DIA) (.531 DIA) (.314) (.228) Ø10.50 Ø13.50 5.80 8.00 Ø6.35-40UNS (1/4-40UNS) (.610 DIA) (.728 DIA) Ø18.50 Ø15.50 Ø6.35-40UNS (1/4-40UNS) 8.00 (.314) (.228) 5.80 (.236) (.452 SQ) (.195) 6.00 5.00 11.50x11.50 (.590 DIA) (.393) (.118) 3.00 10.00 Ø15.00 (.250) (.314) (.118) 3.00 6.35 Ø8.00 (.118) (.370) (.250) 3.00 6.35 Ø9.40 08-Serie 9400-9600-A_11-Serie 9400-9600-A 21/11/12 15:02 Page39

B2-40 APEM www.apem.com 9000 series Alternate action or momentary pushbutton switches Distinctive features and specifications MATERIALS

  • Case : diallylphthalate
  • Actuator : nylon black for series 9630M white for series 9631
  • Bushing : brass, nickel plated
  • Contacts : A : silver CD : brass, gold plated
  • Terminal seal : epoxy ELECTRICAL SPECIFICATIONS
  • Max. current/voltage rating with resistive load and electrical life : - silver contacts (A) : 1A 28VDC - 250.000 cycles 3A 28VDC - 10.000 cycles - gold plated contacts (CD) : 0,4VA 20V max. AC or DC
  • Initial contact resistance : 10 mΩ max. at 0,1A 3VDC
  • Insulation resistance : 10.000 MΩ min.
  • Dielectric strength : 1.000 Vrms 50 Hz min. GENERAL SPECIFICATIONS
  • Operating temperature : -30°C to +85°C
  • Travels : see table below. MODELS 9631 9633M Total travel 3,48 (.137) 2,79 (.110) Pre-travel 0,66 (.026) - Over travel 2,69 (.106) 0,51 (.020) ❑ Bushing Ø 6,35 (1/4) and 11,9 (15/32) ❑ Two electrical functions 08-Serie 9400-9600-A_11-Serie 9400-9600-A 21/11/12 15:02 Page40

APEM www.apem.com B2-41 9000 series Alternate action or momentary pushbutton switches

  • Single pole
  • Solder lug terminals
  • Epoxy sealed terminals (.100) (.220) (.080) (.040) (.050) 1.25 2.55 2.05 1.00 5.60 Bushing Ø 6,35 (1/4) - Alternate action - tactile feedback Gold plated contacts 9631CDB ON - OFF Silver contacts 9631AB ON - OFF (.160 DIA) (.210) (.250)(.640)(.220) (.370 DIA) (.015) (.209) (1/4-40UNS) Ø6.35-40UNS Ø4.05 Ø9.40 0.40 5.30 6.3516.255.60 5.35 EPOXY Bushing Ø 11,9 (15/32) - front or rear mounting - NO 9633MCDB Normally open (.655)(.220) (.370 DIA) (.015) (.209) Ø9.40 0.40 5.30 16.655.60 EPOXY (.365) (.330 DIA) (15/32-32UNS) Ø11.90-32UNS Ø8.40 9.25 A MODEL A 9633M 6.35 (.250) Standard hardware : 1 conic nut and 1 lockwasher Standard hardware : 2 hex nuts 14 mm (.551) across flats and 1 lockwasher Function 3 Function 1 (NO) OFF ON 08-Serie 9400-9600-A_11-Serie 9400-9600-A 21/11/12 15:02 Page41