95SQ015 IRF | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Bulletin PD-2.273 rev. C 05/02 1www.irf.com Dimensions in millimeters and inches Conforms to JEDEC Outline DO - 204AR CASE STYLE AND DIMENSIONS Major Ratings and Characteristics IF(AV) Rectangular 9 A waveform VRRM 15 V IFSM @ tp = 5 µs sine 2900 A VF @ 9 Apk, TJ = 75°C 0.25 V TJ range - 55 to 100 °C Characteristics 95SQ015 Units Description/Features The 95SQ015 axial leaded Schottky rectifier has been opti- mized for ultra low forward voltage drop specifically for the OR-ing of parallel power supplies. The proprietary barrier technology allows for reliable operation up to 100° C junction temperature. Typical applications are in parallel switching power supplies, converters, reverse battery protection, and redundant power subsystems. 125°C T J operation (VR < 5V) Optimized for OR-ing applications Ultra low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance
Bulletin PD-2.273 rev. C 05/02 2 www.irf.com Part number 95SQ015 VR Max. DC Reverse Voltage (V) 15 VRWM Max. Working Peak Reverse Voltage (V) 25 Voltage Ratings IF(AV) Max. Average Forward Current 9 A 50% duty cycle @ T C = 55° C, rectangular wave form * See Fig. 5 IFSM Max. Peak One Cycle Non-Repetitive 2900 5µs Sine or 3µs Rect. pulse Surge Current * See Fig. 7 400 10ms Sine or 6ms Rect. pulse EAS Non-Repetitive Avalanche Energy 4.50 mJ T J = 25 °C, IAS = 1 Amps, L = 9 mH IAR Repetitive Avalanche Current 1 A Current decaying linearly to zero in 1 µsec Frequency limited by TJ max. VA = 3 x VR typical Parameters 95SQ Units Conditions Absolute Maximum Ratings A Following any rated load condition and with rated VRRM applied VFM Max. Forward Voltage Drop (1) 0.31 V @ 9A * See Fig. 1 0.37 V @ 18A
0.25 V @ 9A
0.31 V @ 18A
IRM Max. Reverse Leakage Current (1) 7 mA T J = 25 °C * See Fig. 2 348 mA T J = 100 °C 310 mA T J = 100 °C V R = 12V 190 mA T J = 100 °C V R = 5V CT Max. Junction Capacitance 1300 pF V R = 5VDC, (test signal range 100Khz to 1Mhz) 25 °C LS Typical Series Inductance 10.0 nH Measured lead to lead 5mm from body dv/dt Max. Voltage Rate of Change 10000 V/ µs (Rated VR) TJ = 25 °C TJ = 75 °C VR = rated VR Parameters 95SQ Units Conditions Electrical Specifications (1) Pulse Width < 300µs, Duty Cycle < 2% TJ Max. Junction Temperature Range -55 to 125 °C Tstg Max. Storage Temperature Range -55 to 150 °C RthJL Max. Thermal Resistance Junction 8.0 °C/W DC operation * See Fig. 4 to Lead 1/8 inch lead leangth RthJA Typical Thermal Resistance, 44 °C/W Junction to Air wt Approximate Weight 1.4(0.049) g (oz.) Case Style DO - 204AR JEDEC Thermal-Mechanical Specifications Parameters 95SQ Units Conditions
Bulletin PD-2.273 rev. C 05/02 3www.irf.com Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage Fig. 4 - Maximum Thermal Impedance ZthJL Characteristics Fig. 1 - Maximum Forward Voltage Drop Characteristics 100 FM FInstantaneous Forw ard C urrent - I (A) Forward Voltage Drop - V (V) T = 100°C T = 75°C T = 25°C J J J 100 1000 05 1 0 1 5 R R 75°C 50°C 25°C Reverse Voltage - V (V) Reverse Current - I (mA) T = 100°CJ 100 1000 10000 0 5 10 15 20 25 30 T = 25°CJ Reverse Voltage - V (V)R TJunction C apacitance - C (pF) .01 D = 0.33 D = 0.50 D = 0.25 D = 0.17 D = 0.08 1t , Rectangular Pulse Duration (Seconds) Thermal Impedance - Z (°C /W) Single Pulse (Thermal Resistance) thJL PDM Not es: 1. D uty factor D = t / t 2. Peak T = P x Z + T JD M C thJL = 1/8 inch
Bulletin PD-2.273 rev. C 05/02 4 www.irf.com Fig. 8 - Unclamped Inductive Test Circuit Fig. 5 - Maximum Allowable Case Temperature Vs. Average Forward Current Fig. 6 - Forward Power Loss Characteristics Fig. 7 - Maximum Non-Repetitive Surge Current 1.5 2.5 3.5 0 2 4 6 8 10 12 14 DC Average Power Loss - (Watts) F(AV) D = 0. 08 D = 0. 17 D = 0. 25 D = 0. 33 D = 0. 50 RMS Li mit Average Forw ard C urrent - I (A) 100 105 02468 1 0 1 2 1 4 DC A llowable Case Temperature - (°C) Average Forward Current - I (A)F(AV) 95SQ015 R (DC) = 8. 0°C/WthJL = 1/8 inch 100 1000 10000 10 100 1000 10000 FSM p Non-Repetitive Surge Current - I (A) At Any Rated Load Condition And With Rated V Applied Following Surge RRM Square Wave Pulse Duration - t (microsec) FREE-WHEEL DIODE 40HFL40S02CURRENT MONI TOR HIGH-SPEED SWITCHIRFP460 L DUT Rg = 25 ohm Vd = 25 Volt+
Bulletin PD-2.273 rev. C 05/02 5www.irf.com IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 05/02 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. Ordering Information Table Device Code 1 24 3 1 - 95 = current x 10 2 - S = DO-204AR 3 - Q = Schottky Q Series 4 - Voltage Rating (15V) 5 - TR = Tape & Reel package (1500 pcs) - = Box package (200 pcs)