951400C20D

datasheet search site | www.alldatasheet.com

Document overview

• Manufacturer or author: pROVIDED bY alldatasheet.com(free datasheet download site)
• PDF pages: 18

Technical content

EL-2011-04-020A CR-PE 1. This Engineering Test Report shall not be reproduced except in full unless written permission is received from the V.P. Engineering. Page 1 of 18 Report EL-2011-04-020A CR-PE Intermateability Testing, ATCS and FCI XCede® Connectors (XCede® is a registered trademark of the Amphenol Corp.)

01 May 2011

ATCS and FCI XCede® connectors were subjected to inter mateability testing. Tested product included ATCS gold plated receptacles and headers, FCI GXT™ plated receptacles and headers, and FCI gold plated headers. CONCLUSIONS The tested samples met the specified requirements. SAMPLE DESCRIPTION The test samples were composed of 4 -pair connector modules. Each connector module was constructed of six (6) wafers, each wafer having 4 pairs of signal contacts. The header modules were in a vertical configuration; the receptacle modules were in a rig ht angle configuration. The contact surfaces of the header terminals were lubricated. The details of the submitted test samples are given in the following table. SUBMITTED SAMPLE DESCRIPTION Item Description Part # Plating Type (µm) 1 FCI XCede® Receptacle Module 10091799-101LF GXT™ (0.76) / Ni (2.54) 2 FCI XCede® Receptacle Monoblock1 10091960-400LF GXT™ (0.76) / Ni (2.54) 3 FCI XCede® Header Module 10091767-00C-20DLF GXT™ (0.76) / Ni (2.54) 4 FCI XCede® Header Module 10091767-00C-20DLF Au (0.76) / Ni (2.54) 5 ATCS XCede® Receptacle Module 950-400A-B1D Au (0.76) / Ni (1.27) 6 ATCS XCede® Receptacle Monoblock1 AX400-00566 Au (0.76) / Ni (1.27) 7 ATCS XCede® Header Module 951400C20D Au (0.76) / Ni (1.27)

8 ATCS XCede® Test Board PCB444 Rev E Immersion Sn

1 Each receptacle monoblock consisted of 3 receptacle modules with a common organizer. Each backplane test board held three (3) header modules; each daughter card test board held a single 3 -module monoblock receptacle assembly. The test boards provided circuitry for low level contact resistance (LLCR) measurement of 1 20 positions per sample comprising 60 signal contacts, 51 wide ground contacts, and 9 narrow (end) ground contacts. Dielectric testing was conducted on single unmounted modules The connectors were tested i n all inter -mated combinations of ATCS and FCI receptacles with ATCS, FCI GXT™ plated, and FCI gold plated headers. The resulting sample sets are listed in the following table.

EL-2011-04-020A CR-PE 1. This Engineering Test Report shall not be reproduced except in full unless written permission is received from the V.P. Engineering. Page 2 of 18 SAMPLE SET DESCRIPTION Sample Set Receptacle Identity Header Identity

1 ATCS ATCS

2 FCI FCI, GXT™ Plated

3 FCI ATCS

4 ATCS FCI, GXT™ Plated

5 FCI FCI, Au Plated

6 ATCS FCI, Au Plated

Test sequences are given in the following table. Clause # Test Description Grp. # 1 Temp Life Grp. # 2a Dielectric Grp. # 2b T Shock / Hmd Grp. # 3 Vib / Shock Grp. # 4 MFG

1 Visual Examination 1,8 1,10 1,16 1,14 1,15

2 Mating/Unmating Force 2 2 2 7

4 Insulation Resistance 2,5,8

5 DWV2 3,6,9

6 Thermal Shock 4 6

7 Humidity 7 10

8 Temperature Life 6

9 Thermal Preconditioning 6 5

10 MFG3 9,11

11 Mechanical Shock 8

12 Vibration 10

13 Durability Preconditioning 4 4 4 3

14 Durability 12

15 Dust Application 8

16 Reseat 12 13

17 Thermal Disturbance 14

Sample Size per Sample Set 3 3† 3 3 3

1 LLCR = Low Level Contact Resistance

2 DWV = Dielectric Withstanding Voltage

3 MFG = Mixed Flowing Gas

† Individual Unmounted Modules (Mated throughout Test)

EL-2011-04-020A CR-PE 1. This Engineering Test Report shall not be reproduced except in full unless written permission is received from the V.P. Engineering. Page 3 of 18 TEST METHODS/REQUIREMENTS Clause # Item Test Method Condition Requirement

1 Visual Exam EIA/ECA-364-18B Visual No Detrimental Condition

2 Mating Force

Unmating Force EIA/ECA-364-13D Method A Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact

3 LLCR EIA/ECA-364-23C Option 1 ≤ 55 mΩ Initial, ≤ 10 mΩ Change

4 Insulation Resistance EIA/ECA-364-21D 500 V DC ≥ 1 GΩ

5 DWV EIA-364-20D Method B, Cond. 1, 750Vrms AC No Arc or Leakage ≥ 5 mA 6 Thermal Shock EIA-364-32E Method A, Cond. 2, Dur. A-1 No Damage 7 Humidity EIA-364-31C Method 3 exc. Profile1 & Dur.2 No Damage 8 Temperature Life EIA-364-17B Method A, Cond. 4, Dur. C: 500 hr No Damage 9 Thermal Precond. EIA-364-17B Method A, Cond. 4, 72 hr No Damage

10 MFG EIA-364-65B Class 2A, 7 days No Damage

11 Mechanical Shock3 EIA-364-27B Cond. A No Discontinuity7 > 1 µs 12 Vibration3 EIA/ECA-364-28E Cond. 5 exc. Freq.4, PSD5, Dur.6 No Discontinuity7 > 1 µs 13 Durability Precond. EIA-364-09C (EIA/ECA-364-13D)

50 Cycles

(Measure 1st 3 Cycles) Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact

14 Durability EIA-364-09C

(EIA/ECA-364-13D) + 200 Cycles (Measure 1st 3 Cycles) Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact

15 Dust EIA/ECA-364-91A Composition 1 (Benign) No Damage

16 Reseat EIA/ECA-364-13D Method A, 1 Cycle

(Measure) Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact 17 Thermal Disturbance EIA/ECA-364-110 Cond. A, Dur. A No Damage 1 8 hr Cycle Profile: 2 hour Ramps, 2 hour Dwells 2 500 hour Test Duration 3 Samples were held rigidly during mechanical shock and vibration treatments to remove mass loading by the test boards. 4 Frequency was extended down to 10 Hz and truncated to a maximum of 500 Hz. 5 PSD was adjusted to yield an acceleration level of 5.3grms. 6 Duration was 2 hours.

7 Discontinuity Monitoring per EIA/ECA-364-46B

TEST RESULTS: ATCS Receptacle / ATCS Header Group # 1 (Temperature Life) Test Results, ATCS Receptacle / ATCS Header Step # Test Requirement Step Description Result Comments 1 Visual Exam No Detrimental Cond. Initial No Detrimental Cond. Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Initial 0.46 N/Contact Max. Mate 0.36 N/Contact Min. Unmate NA NA 3 LLCR ≤ 55 mΩ Initial 30 mΩ Max. Pass 4 Durability Precond. Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Preconditioning 0.56 N/Contact Max. Mate 0.38 N/Contact Min. Unmate NA NA 5 LLCR ≤ 10 mΩ Change after Durability 0.8 mΩ Max. Change Pass

6 Temperature Life No Damage Temperature Life No Damage Pass

7 LLCR ≤ 10 mΩ Change Final 2.5 mΩ Max. Change Pass 8 Visual Exam No Detrimental Cond. Initial No Detrimental Cond. Pass

EL-2011-04-020A CR-PE 1. This Engineering Test Report shall not be reproduced except in full unless written permission is received from the V.P. Engineering. Page 4 of 18 Group # 2a (Dielectric) Test Results, ATCS Receptacle / ATCS Header Step # Test Requirement Step Description Result Comments 1 Visual Exam No Detrimental Cond. Initial No Detrimental Cond. Pass

2 Insulation Resistance ≥ 1 GΩ Initial ≥ 1 GΩ Pass

3 DWV No Arc or Leak ≥ 5 mA Initial No Arc or Leak ≥ 5 mA Pass

4 Thermal Shock No Damage Thermal Shock No Damage Pass

5 Insulation Resistance ≥ 1 GΩ after Thermal Shock ≥ 1 GΩ Pass

6 DWV No Arc or Leak ≥ 5 mA after Thermal Shock No Arc or Leak ≥ 5 mA Pass

7 Humidity No Damage Humidity No Damage Pass

8 Insulation Resistance ≥ 1 GΩ Final ≥ 1 GΩ Pass

9 DWV No Arc or Leak ≥ 5 mA Final No Arc or Leak ≥ 5 mA Pass

10 Visual Exam No Detrimental Cond. Final No Detrimental Cond. Pass Group # 2b (Thermal Shock / Humidity), ATCS Receptacle / ATCS Header Step # Test Requirement Step Description Result Comments 1 Visual Exam No Detrimental Cond. Initial No Detrimental Cond. Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Initial 0.57 N/Contact Max. Mate 0.42 N/Contact Min. Unmate NA NA 3 LLCR ≤ 55 mΩ Initial 28 mΩ Max. Pass 4 Durability Precond. Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Preconditioning 0.44 N/Contact Max. Mate 0.35 N/Contact Min. Unmate NA NA 5 LLCR ≤ 10 mΩ Change after Durability 0.5 mΩ Max. Change Pass

6 Thermal Shock No Damage Thermal Shock No Damage Pass

7 LLCR ≤ 10 mΩ Change after Thermal Shock 2.4 mΩ Max. Change Pass

8 Dust No Damage Dust No Damage Pass

9 LLCR ≤ 10 mΩ Change after Dust 2.4 mΩ Max. Change Pass

10 Humidity No Damage Humidity No Damage Pass

11 LLCR ≤ 10 mΩ Change after Humidity 1.1 mΩ Max. Change Pass

12 Reseat

Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact after Humidity 0.41 N/Contact Max. Mate 0.42 N/Contact Min. Unmate NA NA 13 LLCR ≤ 10 mΩ Change after Reseat 1.3 mΩ Max. Change Pass

14 Thermal Disturb No Damage Thermal Disturb No Damage Pass

15 LLCR ≤ 10 mΩ Change Final 1.2 mΩ Max. Change Pass 16 Visual Exam No Detrimental Cond. Final No Detrimental Cond. Pass

EL-2011-04-020A CR-PE 1. This Engineering Test Report shall not be reproduced except in full unless written permission is received from the V.P. Engineering. Page 5 of 18 Group # 3 (Mechanical Shock / Vibration), ATCS Receptacle / ATCS Header Step # Test Requirement Step Description Result Comments 1 Visual Exam No Detrimental Cond. Initial No Detrimental Cond. Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Initial 0.56 N/Contact Max. Mate 0.45 N/Contact Min. Unmate NA NA 3 LLCR ≤ 55 mΩ Initial 26 mΩ Max. Pass 4 Durability Precond. Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Preconditioning 0.48 N/Contact Max. Mate 0.41 N/Contact Min. Unmate NA NA 5 LLCR ≤ 10 mΩ Change after Durability 0.9 mΩ Max. Change Pass 6 Thermal Precond. No Damage Preconditioning No Damage Pass 7 LLCR ≤ 10 mΩ Change after Preconditioning 0.7 mΩ Max. Change Pass

8 Mechanical Shock No Discontinuity > 1 µs Mechanical Shock No Discontinuity > 1 µs Pass

9 LLCR ≤ 10 mΩ Change after Mech. Shock 1.9 mΩ Max. Change Pass

10 Vibration No Discontinuity > 1 µs Vibration No Discontinuity > 1 µs Pass

11 LLCR ≤ 10 mΩ Change after Vibration 2.0 mΩ Max. Change Pass

12 Durability

Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Durability 0.25 N/Contact Max. Mate 0.15 N/Contact Min. Unmate NA NA 13 LLCR ≤ 10 mΩ Change Final 0.8 mΩ Max. Change Pass 14 Visual Exam No Detrimental Cond. Final No Detrimental Cond. Pass Group # 4 (MFG), ATCS Receptacle / ATCS Header Step # Test Requirement Step Description Result Comments 1 Visual Exam No Detrimental Cond. Initial No Detrimental Cond. Pass 2 LLCR ≤ 55 mΩ Initial 28 mΩ Max. Pass 3 Durability Precond. Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Preconditioning 0.61 N/Contact Max. Mate 0.41 N/Contact Min. Unmate NA NA 4 LLCR ≤ 10 mΩ Change after Durability 1.5 mΩ Max. Change Pass 5 Thermal Precond. No Damage Preconditioning No Damage Pass 6 LLCR ≤ 10 mΩ Change after Preconditioning 1.2 mΩ Max. Change Pass

7 Mating Force

Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact after Preconditioning 0.33 N/Contact Max. Mate 0.26 N/Contact Min. Unmate NA NA 8 LLCR ≤ 10 mΩ Change before MFG 3.3 mΩ Max. Change Pass

9 MFG No Damage 7 d Unmated Hdr & Rcpt No Damage Pass

10 LLCR ≤ 10 mΩ Change 7 d MFG 3.5 mΩ Max. Change Pass

11 MFG No Damage + 7 d Mated Connector Pair No Damage Pass

12 LLCR ≤ 10 mΩ Change 14 d MFG 3.5 mΩ Max. Change Pass

13 Reseat

Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact after MFG 0.26 N/Contact Max. Mate 0.27 N/Contact Min. Unmate NA NA 14 LLCR ≤ 10 mΩ Change Final 2.9 mΩ Max. Change Pass 15 Visual Exam No Detrimental Cond. Final No Detrimental Cond. Pass

EL-2011-04-020A CR-PE 1. This Engineering Test Report shall not be reproduced except in full unless written permission is received from the V.P. Engineering. Page 6 of 18 FCI Receptacle / FCI GXT™ Plated Header Group # 1 (Temperature Life) Test Results, FCI Receptacle / FCI GXT™ Plated Header Step # Test Requirement Step Description Result Comments 1 Visual Exam No Detrimental Cond. Initial No Detrimental Cond. Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Initial 0.43 N/Contact Max. Mate 0.28 N/Contact Min. Unmate NA NA 3 LLCR ≤ 55 mΩ Initial 29 mΩ Max. Pass 4 Durability Precond. Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Preconditioning 0.49 N/Contact Max. Mate 0.33 N/Contact Min. Unmate NA NA 5 LLCR ≤ 10 mΩ Change after Durability 0.5 mΩ Max. Change Pass 7 LLCR ≤ 10 mΩ Change Final 7.3 mΩ Max. Change Pass 8 Visual Exam No Detrimental Cond. Initial No Detrimental Cond. Pass Group # 2a (Dielectric) Test Results, FCI Receptacle / FCI GXT™ Plated Header Step # Test Requirement Step Description Result Comments 1 Visual Exam No Detrimental Cond. Initial No Detrimental Cond. Pass 10 Visual Exam No Detrimental Cond. Final No Detrimental Cond. Pass

EL-2011-04-020A CR-PE 1. This Engineering Test Report shall not be reproduced except in full unless written permission is received from the V.P. Engineering. Page 7 of 18 Group # 2b (Thermal Shock / Humidity), FCI Receptacle / FCI GXT™ Plated Header Step # Test Requirement Step Description Result Comments 1 Visual Exam No Detrimental Cond. Initial No Detrimental Cond. Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Initial 0.43 N/Contact Max. Mate 0.34 N/Contact Min. Unmate NA NA 3 LLCR ≤ 55 mΩ Initial 29 mΩ Max. Pass 4 Durability Precond. Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Preconditioning 0.43 N/Contact Max. Mate 0.33 N/Contact Min. Unmate NA NA 5 LLCR ≤ 10 mΩ Change after Durability 0.5 mΩ Max. Change Pass 7 LLCR ≤ 10 mΩ Change after Thermal Shock 3.8 mΩ Max. Change Pass 9 LLCR ≤ 10 mΩ Change after Dust 2.0 mΩ Max. Change Pass 11 LLCR ≤ 10 mΩ Change after Humidity 1.3 mΩ Max. Change Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact after Humidity 0.35 N/Contact Max. Mate 0.40 N/Contact Min. Unmate NA NA 13 LLCR ≤ 10 mΩ Change after Reseat 1.5 mΩ Max. Change Pass 15 LLCR ≤ 10 mΩ Change Final 1.9 mΩ Max. Change Pass 16 Visual Exam No Detrimental Cond. Final No Detrimental Cond. Pass Group # 3 (Mechanical Shock / Vibration), FCI Receptacle / FCI GXT™ Plated Header Step # Test Requirement Step Description Result Comments 1 Visual Exam No Detrimental Cond. Initial No Detrimental Cond. Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Initial 0.60 N/Contact Max. Mate 0.45 N/Contact Min. Unmate NA NA 3 LLCR ≤ 55 mΩ Initial 29 mΩ Max. Pass 4 Durability Precond. Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Preconditioning 0.48 N/Contact Max. Mate 0.36 N/Contact Min. Unmate NA NA 5 LLCR ≤ 10 mΩ Change after Durability 0.2 mΩ Max. Change Pass 6 Thermal Precond. No Damage Preconditioning No Damage Pass 7 LLCR ≤ 10 mΩ Change after Preconditioning 2.2 mΩ Max. Change Pass 9 LLCR ≤ 10 mΩ Change after Mech. Shock 4.2 mΩ Max. Change Pass 11 LLCR ≤ 10 mΩ Change after Vibration 7.4 mΩ Max. Change Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Durability 0.25 N/Contact Max. Mate 0.17 N/Contact Min. Unmate NA NA 13 LLCR ≤ 10 mΩ Change Final 2.4 mΩ Max. Change Pass 14 Visual Exam No Detrimental Cond. Final No Detrimental Cond. Pass

EL-2011-04-020A CR-PE 1. This Engineering Test Report shall not be reproduced except in full unless written permission is received from the V.P. Engineering. Page 8 of 18 Group # 4 (MFG), FCI Receptacle / FCI GXT™ Plated Header Step # Test Requirement Step Description Result Comments 1 Visual Exam No Detrimental Cond. Initial No Detrimental Cond. Pass 2 LLCR ≤ 55 mΩ Initial 29 mΩ Max. Pass 3 Durability Precond. Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Preconditioning 0.47 N/Contact Max. Mate 0.37 N/Contact Min. Unmate NA NA 4 LLCR ≤ 10 mΩ Change after Durability 0.3 mΩ Max. Change Pass 5 Thermal Precond. No Damage Preconditioning No Damage Pass 6 LLCR ≤ 10 mΩ Change after Preconditioning 1.7 mΩ Max. Change Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact after Preconditioning 0.25 N/Contact Max. Mate 0.17 N/Contact Min. Unmate NA NA 8 LLCR ≤ 10 mΩ Change before MFG 2.5 mΩ Max. Change Pass 10 LLCR ≤ 10 mΩ Change 7 d MFG 8.7 mΩ Max. Change Pass 12 LLCR ≤ 10 mΩ Change 14 d MFG 2.1 mΩ Max. Change Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact after MFG 0.18 N/Contact Max. Mate 0.23 N/Contact Min. Unmate NA NA 14 LLCR ≤ 10 mΩ Change Final 4.7 mΩ Max. Change Pass 15 Visual Exam No Detrimental Cond. Final No Detrimental Cond. Pass FCI Receptacle / ATCS Header Group # 1 (Temperature Life) Test Results, FCI Receptacle / ATCS Header Step # Test Requirement Step Description Result Comments 1 Visual Exam No Detrimental Cond. Initial No Detrimental Cond. Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Initial 0.56 N/Contact Max. Mate 0.39 N/Contact Min. Unmate NA NA 3 LLCR ≤ 55 mΩ Initial 28 mΩ Max. Pass 4 Durability Precond. Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Preconditioning 0.54 N/Contact Max. Mate 0.34 N/Contact Min. Unmate NA NA 5 LLCR ≤ 10 mΩ Change after Durability 0.9 mΩ Max. Change Pass 7 LLCR ≤ 10 mΩ Change Final 1.7 mΩ Max. Change Pass 8 Visual Exam No Detrimental Cond. Initial No Detrimental Cond. Pass

EL-2011-04-020A CR-PE 1. This Engineering Test Report shall not be reproduced except in full unless written permission is received from the V.P. Engineering. Page 9 of 18 Group # 2a (Dielectric) Test Results, FCI Receptacle / ATCS Header Step # Test Requirement Step Description Result Comments 1 Visual Exam No Detrimental Cond. Initial No Detrimental Cond. Pass 10 Visual Exam No Detrimental Cond. Final No Detrimental Cond. Pass Group # 2b (Thermal Shock / Humidity), FCI Receptacle / ATCS Header Step # Test Requirement Step Description Result Comments 1 Visual Exam No Detrimental Cond. Initial No Detrimental Cond. Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Initial 0.57 N/Contact Max. Mate 0.40 N/Contact Min. Unmate NA NA 3 LLCR ≤ 55 mΩ Initial 28 mΩ Max. Pass 4 Durability Precond. Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Preconditioning 0.49 N/Contact Max. Mate 0.36 N/Contact Min. Unmate NA NA 5 LLCR ≤ 10 mΩ Change after Durability 0.9 mΩ Max. Change Pass 7 LLCR ≤ 10 mΩ Change after Thermal Shock 1.6 mΩ Max. Change Pass 9 LLCR ≤ 10 mΩ Change after Dust 1.6 mΩ Max. Change Pass 11 LLCR ≤ 10 mΩ Change after Humidity 0.8 mΩ Max. Change Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact after Humidity 0.37 N/Contact Max. Mate 0.42 N/Contact Min. Unmate NA NA 13 LLCR ≤ 10 mΩ Change after Reseat 1.5 mΩ Max. Change Pass 15 LLCR ≤ 10 mΩ Change Final 2.1 mΩ Max. Change Pass 16 Visual Exam No Detrimental Cond. Final No Detrimental Cond. Pass

EL-2011-04-020A CR-PE 1. This Engineering Test Report shall not be reproduced except in full unless written permission is received from the V.P. Engineering. Page 10 of 18 Group # 3 (Mechanical Shock / Vibration), FCI Receptacle / ATCS Header Step # Test Requirement Step Description Result Comments 1 Visual Exam No Detrimental Cond. Initial No Detrimental Cond. Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Initial 0.67 N/Contact Max. Mate 0.55 N/Contact Min. Unmate NA NA 3 LLCR ≤ 55 mΩ Initial 28 mΩ Max. Pass 4 Durability Precond. Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Preconditioning 0.53 N/Contact Max. Mate 0.44 N/Contact Min. Unmate NA NA 5 LLCR ≤ 10 mΩ Change after Durability 2.3 mΩ Max. Change Pass 6 Thermal Precond. No Damage Preconditioning No Damage Pass 7 LLCR ≤ 10 mΩ Change after Preconditioning 1.3 mΩ Max. Change Pass 9 LLCR ≤ 10 mΩ Change after Mech. Shock 2.0 mΩ Max. Change Pass 11 LLCR ≤ 10 mΩ Change after Vibration 1.6 mΩ Max. Change Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Durability 0.27 N/Contact Max. Mate 0.20 N/Contact Min. Unmate NA NA 13 LLCR ≤ 10 mΩ Change Final 0.7 mΩ Max. Change Pass 14 Visual Exam No Detrimental Cond. Final No Detrimental Cond. Pass Group # 4 (MFG), FCI Receptacle / ATCS Header Step # Test Requirement Step Description Result Comments 1 Visual Exam No Detrimental Cond. Initial No Detrimental Cond. Pass 2 LLCR ≤ 55 mΩ Initial 28 mΩ Max. Pass 3 Durability Precond. Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Preconditioning 0.55 N/Contact Max. Mate 0.38 N/Contact Min. Unmate NA NA 4 LLCR ≤ 10 mΩ Change after Durability 0.5 mΩ Max. Change Pass 5 Thermal Precond. No Damage Preconditioning No Damage Pass 6 LLCR ≤ 10 mΩ Change after Preconditioning 2.4 mΩ Max. Change Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact after Preconditioning 0.27 N/Contact Max. Mate 0.17 N/Contact Min. Unmate NA NA 8 LLCR ≤ 10 mΩ Change before MFG 3.4 mΩ Max. Change Pass 10 LLCR ≤ 10 mΩ Change 7 d MFG 3.5 mΩ Max. Change Pass 12 LLCR ≤ 10 mΩ Change 14 d MFG 3.4 mΩ Max. Change Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact after MFG 0.23 N/Contact Max. Mate 0.26 N/Contact Min. Unmate NA NA 14 LLCR ≤ 10 mΩ Change Final 3.5 mΩ Max. Change Pass 15 Visual Exam No Detrimental Cond. Final No Detrimental Cond. Pass

EL-2011-04-020A CR-PE 1. This Engineering Test Report shall not be reproduced except in full unless written permission is received from the V.P. Engineering. Page 11 of 18 ATCS Receptacle / FCI GXT™ Plated Header Group # 1 (Temperature Life) Test Results, ATCS Receptacle / FCI GXT™ Plated Header Step # Test Requirement Step Description Result Comments 1 Visual Exam No Detrimental Cond. Initial No Detrimental Cond. Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Initial 0.60 N/Contact Max. Mate 0.25 N/Contact Min. Unmate NA NA 3 LLCR ≤ 55 mΩ Initial 27 mΩ Max. Pass 4 Durability Precond. Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Preconditioning 0.47 N/Contact Max. Mate 0.30 N/Contact Min. Unmate NA NA 5 LLCR ≤ 10 mΩ Change after Durability 1.8 mΩ Max. Change Pass 7 LLCR ≤ 10 mΩ Change Final 9.3 mΩ Max. Change 1 Pass 8 Visual Exam No Detrimental Cond. Initial No Detrimental Cond. Pass 1 Two (2) signal contacts exhibited resistance change > 10 mΩ. One signal contact exhibited a resistance change of 11.9 mΩ); When re-measured, the contact resistance change was 6.7 mΩ. The second contact exhibited a resistance change of 24.4 mΩ; When re-measured, the contact resistance change was 36.7 mΩ. Part unmated & inspected with debris & out of position pin found. Re- mated and re-measured, the contact resistance change was 5.0 mΩ. Group # 2a (Dielectric) Test Results, ATCS Receptacle / FCI GXT™ Plated Header Step # Test Requirement Step Description Result Comments 1 Visual Exam No Detrimental Cond. Initial No Detrimental Cond. Pass 10 Visual Exam No Detrimental Cond. Final No Detrimental Cond. Pass

EL-2011-04-020A CR-PE 1. This Engineering Test Report shall not be reproduced except in full unless written permission is received from the V.P. Engineering. Page 12 of 18 Group # 2b (Thermal Shock / Humidity), ATCS Receptacle / FCI GXT™ Plated Header Step # Test Requirement Step Description Result Comments 1 Visual Exam No Detrimental Cond. Initial No Detrimental Cond. Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Initial 0.48 N/Contact Max. Mate 0.41 N/Contact Min. Unmate NA NA 3 LLCR ≤ 55 mΩ Initial 27 mΩ Max. Pass 4 Durability Precond. Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Preconditioning 0.45 N/Contact Max. Mate 0.36 N/Contact Min. Unmate NA NA 5 LLCR ≤ 10 mΩ Change after Durability 2.3 mΩ Max. Change Pass 7 LLCR ≤ 10 mΩ Change after Thermal Shock 5.2 mΩ Max. Change Pass 9 LLCR ≤ 10 mΩ Change after Dust 3.3 mΩ Max. Change Pass 11 LLCR ≤ 10 mΩ Change after Humidity 5.8 mΩ Max. Change Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact after Humidity 0.30 N/Contact Max. Mate 0.34 N/Contact Min. Unmate NA NA 13 LLCR ≤ 10 mΩ Change after Reseat 3.5 mΩ Max. Change Pass 15 LLCR ≤ 10 mΩ Change Final 3.6 mΩ Max. Change Pass 16 Visual Exam No Detrimental Cond. Final No Detrimental Cond. Pass Group # 3 (Mechanical Shock / Vibration), ATCS Receptacle / FCI GXT™ Plat ed Header Step # Test Requirement Step Description Result Comments 1 Visual Exam No Detrimental Cond. Initial No Detrimental Cond. Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Initial 0.58 N/Contact Max. Mate 0.50 N/Contact Min. Unmate NA NA 3 LLCR ≤ 55 mΩ Initial 26 mΩ Max. Pass 4 Durability Precond. Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Preconditioning 0.47 N/Contact Max. Mate 0.42 N/Contact Min. Unmate NA NA 5 LLCR ≤ 10 mΩ Change after Durability 0.6 mΩ Max. Change Pass 6 Thermal Precond. No Damage Preconditioning No Damage Pass 7 LLCR ≤ 10 mΩ Change after Preconditioning 3.5 mΩ Max. Change Pass 9 LLCR ≤ 10 mΩ Change after Mech. Shock 3.6 mΩ Max. Change Pass 11 LLCR ≤ 10 mΩ Change after Vibration 6.3 mΩ Max. Change Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Durability 0.26 N/Contact Max. Mate 0.19 N/Contact Min. Unmate NA NA 13 LLCR ≤ 10 mΩ Change Final 6.3 mΩ Max. Change Pass 14 Visual Exam No Detrimental Cond. Final No Detrimental Cond. Pass

EL-2011-04-020A CR-PE 1. This Engineering Test Report shall not be reproduced except in full unless written permission is received from the V.P. Engineering. Page 13 of 18 Group # 4 (MFG), ATCS Receptacle / FCI GXT™ Plated Header Step # Test Requirement Step Description Result Comments 1 Visual Exam No Detrimental Cond. Initial No Detrimental Cond. Pass 2 LLCR ≤ 55 mΩ Initial 27 mΩ Max. Pass 3 Durability Precond. Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Preconditioning 0.52 N/Contact Max. Mate 0.38 N/Contact Min. Unmate NA NA 4 LLCR ≤ 10 mΩ Change after Durability 0.3 mΩ Max. Change Pass 5 Thermal Precond. No Damage Preconditioning No Damage Pass 6 LLCR ≤ 10 mΩ Change after Preconditioning 4.6 mΩ Max. Change Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact after Preconditioning 0.27 N/Contact Max. Mate 0.15 N/Contact Min. Unmate NA NA 8 LLCR ≤ 10 mΩ Change before MFG 3.0 mΩ Max. Change Pass 10 LLCR ≤ 10 mΩ Change 7 d MFG 2.7 mΩ Max. Change Pass 12 LLCR ≤ 10 mΩ Change 14 d MFG 2.6 mΩ Max. Change Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact after MFG 0.19 N/Contact Max. Mate 0.21 N/Contact Min. Unmate NA NA 14 LLCR ≤ 10 mΩ Change Final 4.0 mΩ Max. Change Pass 15 Visual Exam No Detrimental Cond. Final No Detrimental Cond. Pass FCI Receptacle / FCI Au Plated Header Group # 1 (Temperature Life) Test Results, FCI Receptacle / FCI Au Plated Header Step # Test Requirement Step Description Result Comments 1 Visual Exam No Detrimental Cond. Initial No Detrimental Cond. Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Initial 0.55 N/Contact Max. Mate 0.32 N/Contact Min. Unmate NA NA 3 LLCR ≤ 55 mΩ Initial 28 mΩ Max. Pass 4 Durability Precond. Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Preconditioning 0.51 N/Contact Max. Mate 0.33 N/Contact Min. Unmate NA NA 5 LLCR ≤ 10 mΩ Change after Durability 0.7 mΩ Max. Change Pass 7 LLCR ≤ 10 mΩ Change Final 2.0 mΩ Max. Change Pass 8 Visual Exam No Detrimental Cond. Initial No Detrimental Cond. Pass

EL-2011-04-020A CR-PE 1. This Engineering Test Report shall not be reproduced except in full unless written permission is received from the V.P. Engineering. Page 14 of 18 Group # 2a (Dielectric) Test Results, FCI Receptacle / FCI Au Plated Header Step # Test Requirement Step Description Result Comments 1 Visual Exam No Detrimental Cond. Initial No Detrimental Cond. Pass 10 Visual Exam No Detrimental Cond. Final No Detrimental Cond. Pass Group # 2b (Thermal Shock / Humidity), FCI Receptacle / FCI Au Plated Header Step # Test Requirement Step Description Result Comments 1 Visual Exam No Detrimental Cond. Initial No Detrimental Cond. Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Initial 0.48 N/Contact Max. Mate 0.40 N/Contact Min. Unmate NA NA 3 LLCR ≤ 55 mΩ Initial 28 mΩ Max. Pass 4 Durability Precond. Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Preconditioning 0.43 N/Contact Max. Mate 0.33 N/Contact Min. Unmate NA NA 5 LLCR ≤ 10 mΩ Change after Durability 1.0 mΩ Max. Change Pass 7 LLCR ≤ 10 mΩ Change after Thermal Shock 2.3 mΩ Max. Change Pass 9 LLCR ≤ 10 mΩ Change after Dust 2.0 mΩ Max. Change Pass 11 LLCR ≤ 10 mΩ Change after Humidity 1.8 mΩ Max. Change Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact after Humidity 0.41 N/Contact Max. Mate 0.43 N/Contact Min. Unmate NA NA 13 LLCR ≤ 10 mΩ Change after Reseat 2.2 mΩ Max. Change Pass 15 LLCR ≤ 10 mΩ Change Final 1.4 mΩ Max. Change Pass 16 Visual Exam No Detrimental Cond. Final No Detrimental Cond. Pass

EL-2011-04-020A CR-PE 1. This Engineering Test Report shall not be reproduced except in full unless written permission is received from the V.P. Engineering. Page 15 of 18 Group # 3 (Mechanical Shock / Vibration), FCI Receptacle / FCI Au Plated Header Step # Test Requirement Step Description Result Comments 1 Visual Exam No Detrimental Cond. Initial No Detrimental Cond. Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Initial 0.67 N/Contact Max. Mate 0.49 N/Contact Min. Unmate NA NA 3 LLCR ≤ 55 mΩ Initial 28 mΩ Max. Pass 4 Durability Precond. Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Preconditioning 0.50 N/Contact Max. Mate 0.38 N/Contact Min. Unmate NA NA 5 LLCR ≤ 10 mΩ Change after Durability 0.8 mΩ Max. Change Pass 6 Thermal Precond. No Damage Preconditioning No Damage Pass 7 LLCR ≤ 10 mΩ Change after Preconditioning 0.5 mΩ Max. Change Pass 9 LLCR ≤ 10 mΩ Change after Mech. Shock 2.4 mΩ Max. Change Pass 11 LLCR ≤ 10 mΩ Change after Vibration 2.9 mΩ Max. Change Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Durability 0.29 N/Contact Max. Mate 0.20 N/Contact Min. Unmate NA NA 13 LLCR ≤ 10 mΩ Change Final 0.9 mΩ Max. Change Pass 14 Visual Exam No Detrimental Cond. Final No Detrimental Cond. Pass Group # 4 (MFG), FCI Receptacle / FCI Au Plated Header Step # Test Requirement Step Description Result Comments 1 Visual Exam No Detrimental Cond. Initial No Detrimental Cond. Pass 2 LLCR ≤ 55 mΩ Initial 29 mΩ Max. Pass 3 Durability Precond. Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Preconditioning 0.57 N/Contact Max. Mate 0.37 N/Contact Min. Unmate NA NA 4 LLCR ≤ 10 mΩ Change after Durability 1.4 mΩ Max. Change Pass 5 Thermal Precond. No Damage Preconditioning No Damage Pass 6 LLCR ≤ 10 mΩ Change after Preconditioning 0.8 mΩ Max. Change Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact after Preconditioning 0.30 N/Contact Max. Mate 0.21 N/Contact Min. Unmate NA NA 8 LLCR ≤ 10 mΩ Change before MFG 1.7 mΩ Max. Change Pass 10 LLCR ≤ 10 mΩ Change 7 d MFG 3.0 mΩ Max. Change Pass 12 LLCR ≤ 10 mΩ Change 14 d MFG 4.7 mΩ Max. Change Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact after MFG 0.22 N/Contact Max. Mate 0.24 N/Contact Min. Unmate NA NA 14 LLCR ≤ 10 mΩ Change Final 6.8 mΩ Max. Change Pass 15 Visual Exam No Detrimental Cond. Final No Detrimental Cond. Pass

EL-2011-04-020A CR-PE 1. This Engineering Test Report shall not be reproduced except in full unless written permission is received from the V.P. Engineering. Page 16 of 18 ATCS Receptacle / FCI Au Plated Header Group # 1 (Temperature Life) Test Results, ATCS Receptacle / FCI Au Plated Header Step # Test Requirement Step Description Result Comments 1 Visual Exam No Detrimental Cond. Initial No Detrimental Cond. Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Initial 0.50 N/Contact Max. Mate 0.30 N/Contact Min. Unmate NA NA 3 LLCR ≤ 55 mΩ Initial 27 mΩ Max. Pass 4 Durability Precond. Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Preconditioning 0.48 N/Contact Max. Mate 0.32 N/Contact Min. Unmate NA NA 5 LLCR ≤ 10 mΩ Change after Durability 1.3 mΩ Max. Change Pass 7 LLCR ≤ 10 mΩ Change Final 6.1 mΩ Max. Change Pass 8 Visual Exam No Detrimental Cond. Initial No Detrimental Cond. Pass Group # 2a (Dielectric) Test Results, ATCS Receptacle / FCI Au Plated Header Step # Test Requirement Step Description Result Comments 1 Visual Exam No Detrimental Cond. Initial No Detrimental Cond. Pass 10 Visual Exam No Detrimental Cond. Final No Detrimental Cond. Pass

EL-2011-04-020A CR-PE 1. This Engineering Test Report shall not be reproduced except in full unless written permission is received from the V.P. Engineering. Page 17 of 18 Group # 2b (Thermal Shock / Humidity), ATCS Receptacle / FCI Au Plated Header Step # Test Requirement Step Description Result Comments 1 Visual Exam No Detrimental Cond. Initial No Detrimental Cond. Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Initial 0.46 N/Contact Max. Mate 0.36 N/Contact Min. Unmate NA NA 3 LLCR ≤ 55 mΩ Initial 27 mΩ Max. Pass 4 Durability Precond. Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Preconditioning 0.46 N/Contact Max. Mate 0.34 N/Contact Min. Unmate NA NA 5 LLCR ≤ 10 mΩ Change after Durability 0.7 mΩ Max. Change Pass 7 LLCR ≤ 10 mΩ Change after Thermal Shock 5.7 mΩ Max. Change Pass 9 LLCR ≤ 10 mΩ Change after Dust 3.3 mΩ Max. Change Pass 11 LLCR ≤ 10 mΩ Change after Humidity 3.9 mΩ Max. Change Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact after Humidity 0.32 N/Contact Max. Mate 0.37 N/Contact Min. Unmate NA NA 13 LLCR ≤ 10 mΩ Change after Reseat 1.2 mΩ Max. Change Pass 15 LLCR ≤ 10 mΩ Change Final 1.3 mΩ Max. Change Pass 16 Visual Exam No Detrimental Cond. Final No Detrimental Cond. Pass Group # 3 (Mechanical Shock / Vibration), ATCS Receptacle / FCI Au Plated Header Step # Test Requirement Step Description Result Comments 1 Visual Exam No Detrimental Cond. Initial No Detrimental Cond. Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Initial 0.49 N/Contact Max. Mate 0.46 N/Contact Min. Unmate NA NA 3 LLCR ≤ 55 mΩ Initial 26 mΩ Max. Pass 4 Durability Precond. Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Preconditioning 0.49 N/Contact Max. Mate 0.36 N/Contact Min. Unmate NA NA 5 LLCR ≤ 10 mΩ Change after Durability 0.6 mΩ Max. Change Pass 6 Thermal Precond. No Damage Preconditioning No Damage Pass 7 LLCR ≤ 10 mΩ Change after Preconditioning 0.7 mΩ Max. Change Pass 9 LLCR ≤ 10 mΩ Change after Mech. Shock 1.6 mΩ Max. Change Pass 11 LLCR ≤ 10 mΩ Change after Vibration 1.3 mΩ Max. Change Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Durability 0.27 N/Contact Max. Mate 0.21 N/Contact Min. Unmate NA NA 13 LLCR ≤ 10 mΩ Change Final 1.5 mΩ Max. Change Pass 14 Visual Exam No Detrimental Cond. Final No Detrimental Cond. Pass

EL-2011-04-020A CR-PE 1. This Engineering Test Report shall not be reproduced except in full unless written permission is received from the V.P. Engineering. Page 18 of 18 Group # 4 (MFG), ATCS Receptacle / FCI Au Plated Header Step # Test Requirement Step Description Result Comments 1 Visual Exam No Detrimental Cond. Initial No Detrimental Cond. Pass 2 LLCR ≤ 55 mΩ Initial 27 mΩ Max. Pass 3 Durability Precond. Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact Preconditioning 0.45 N/Contact Max. Mate 0.33 N/Contact Min. Unmate NA NA 4 LLCR ≤ 10 mΩ Change after Durability 0.2 mΩ Max. Change Pass 5 Thermal Precond. No Damage Preconditioning No Damage Pass 6 LLCR ≤ 10 mΩ Change after Preconditioning 2.8 mΩ Max. Change Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact after Preconditioning 0.27 N/Contact Max. Mate 0.18 N/Contact Min. Unmate NA NA 8 LLCR ≤ 10 mΩ Change before MFG 6.4 mΩ Max. Change Pass 10 LLCR ≤ 10 mΩ Change 7 d MFG 3.7 mΩ Max. Change Pass 12 LLCR ≤ 10 mΩ Change 14 d MFG 1.5 mΩ Max. Change Pass Read & Record Mate Force/ Contact Read & Record Unmate Force/Contact after MFG 0.21 N/Contact Max. Mate 0.23 N/Contact Min. Unmate NA NA 14 LLCR ≤ 10 mΩ Change Final 5.9 mΩ Max. Change Pass 15 Visual Exam No Detrimental Cond. Final No Detrimental Cond. Pass Revision Record Revision Level Revision Date Pages Changed Description of Changes A 17 May 2011 All Original release